|
|
Modification of a blood pump as a heart replacement
Simandl, Mirek ; Fialová, Simona (referee) ; Pochylý, František (advisor)
The master’s thesis deals optimization of regenerative pump and axial pump with ring motors that are designed as a heart replacement. Analysis of the koncepts is performed which were made in previous master’s thesis. There is created a new design of construction and hydraulition with using flat motors based on the analysis. The compact assembly of two impeller was formulated that replaced left and right heart and it served as a function of heart replacement. A functional model of the pump is created, there is measured characteristics of impeller and results are compared with CFD analysis. The design requirements some parts of the axial pump are added and it’s deviced feasibility analysis.
|
|
|
Optimized design of turbine engine intake
Kubo, Michal ; Matějů, Jiří (referee) ; Popela, Robert (advisor)
This master thesis deals with design of a subsonic intake which is used to supply small jet engine integrate into the fuselage of agile small unmanned aerial vehicle (UAV). Some kinds of these intakes are listed in order to inspire and introduce future designers into this part of jet plane design. This thesis contains a small amount of theory about compressible flow, and necessary knowledge which are important to know before the very first attempt to design an intake. Two models were designed in order to prove that the theory listed in this thesis is useful and can be used as a guide in design process of subsonic intakes. Both designs have the same layout. S-duct design with one intake placed on the belly of fuselage was chosen. After CFD analysis of first model it was found that there are huge area with separated flow and vortex. Separated flow leads to big total pressure loss and pressure distortion. While designing the second model the emphasis was to avoid this vortex and improve flow conditions. This optimization was success and the second design have smaller pressure loss in compare to the first design. The difference is more than 50% at fly speed M=0,8.
|
|
|
Design of heat exchanger
Buzík, Jiří ; Lošák, Pavel (referee) ; Nekvasil, Richard (advisor)
The master thesis deals with thermal hydraulic design and strength design of a heat exchanger with “U” tube bundle inside of a shell. The first chapter introduces general design issues of the heat exchangers. The following chapter describes thermal hydraulic design created in software Maple 16.0 by using Kern’s method and the method of Bell-Delaware. HTRI software was used for the control of thermal hydraulic design correctness. To check critical locations of fluid flow in space between the tubes, the CFD model was created at ANSYS Fluent 14.0 software. Accuracy of strength design was verifying by Sant’ Ambrogio software in accordance with ČSN EN 13 445 standards. The last chapter concerns with FEM analysis. According to standards ČSN EN 13 445 the design by analysis namely method based on stress categories were used for the strength analysis of nozzle.
|
|
|
Design of Throttle body for SI engine
Jantač, František ; Bazala, Jiří (referee) ; Beran, Martin (advisor)
This master’s thesis deals with the design of the throttle body of the intake manifold of a spark-ignition engine with regards to minimizing throttle loses at full engine load. The first part of this thesis focuses on the elements of intake tract structure on contemporary combustion engine including their design solutions and the theory of flow. The thesis also describes the creation of the 3-D CAD model of intake manifold with a throttle body and the description of the CFD flow simulation with the evaluation of resul.
|
|
|
Vane pump
Poul, Josef ; Jandourek, Pavel (referee) ; Klas, Roman (advisor)
This bachelor’s thesis talks about the problems of pumps, especially vane pumps. After research part, there are given some basic relations for the design of the pump. Then there is calculation of the basic dimensions according to the given parameters. In conslusion, the designed shape is subjected to the CFD analysis.
|
|
|
Optimalization of Intake Manifold for SI Engine
Vondráček, Václav ; Vančura, Jan (referee) ; Beran, Martin (advisor)
The main aim of this diploma thesis is to design two different types of air throttles in the intake manifold and compare their influence on a loss of dynamics of the flow of drawn air. The main purpose is to compare the mass flow for wholly opened air throttle. It deals with creating CDF model of intake manifold by using 3D scanner Atos and software Pro/Engineer WF5. During the work, the results of the CFD analysis were used for a real testing.
|
|
|
Hydraulic design of inducer fuel pump for rocket engine
Kadlec, Jan ; Rudolf, Pavel (referee) ; Štefan, David (advisor)
The aim of this masters thesis is hydraulic design of inducer for given pump geometry and operating parameters. The first part of this thesis deals with cavitation problematic in hydrodynamic pumps. Next section describes two-dimensional design of the inducer and according to that, the 3D CAD model of inducer is made. The later part deals with thorough CFD analysis and determination of the main hydraulic parameters of inducer itself and also with whole pump completed with this inducer. The last section is devoted to inducer design improvement.
|
|
|
Modification of a blood pump as a heart replacement
Simandl, Mirek ; Fialová, Simona (referee) ; Pochylý, František (advisor)
The master’s thesis deals optimization of regenerative pump and axial pump with ring motors that are designed as a heart replacement. Analysis of the koncepts is performed which were made in previous master’s thesis. There is created a new design of construction and hydraulition with using flat motors based on the analysis. The compact assembly of two impeller was formulated that replaced left and right heart and it served as a function of heart replacement. A functional model of the pump is created, there is measured characteristics of impeller and results are compared with CFD analysis. The design requirements some parts of the axial pump are added and it’s deviced feasibility analysis.
|
|
|
CFD analysis of icing effects on commuter aircraft configuration
Zima, Martin ; Navrátil, Jan (referee) ; Popela, Robert (advisor)
The Diploma Thesis concerns investigation of icing effects at L 410 NG aircraft. The aircraft is certified under FAR/CS/AP-23 Commuter category. An analysis was performed for existing Pneumatic De-icing Boots System at the wing area according to three flight configurations and icing conditions referring to document Part 25 Appendix C and O. The analysis was done by CFD solver FENSAP-ICE for various runs with respect to the icing envelope. Cases were assigned as two 2D cross-sections situated at the aircraft’s wing aileron part. Cross-sectional Reynold’s number oscillate between 4.5–8.5×106. Automatic operation of Pneumatic De-icing Boots System was proposed. Attention was paid to the ice accretion aft to the Pneumatic De-icing Boots System. The Appendix (Příloha) P6 contains an English written Article concerning main Diploma Thesis sections.
|
|
|
The computation of draft tobe of the turbine for giving parameters
Žák, František ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
This diploma thesis describes design of a new shape of the draft tube for small hydro Katovice with maintaining built dimension. First part of this thesis is devoted to the formulation of the problem, description of basic function of the draft tube, its efficiency and other formulas. In the second part of this thesis the analysis is made for original design supported by CFD calculation. Furthermore a new design of the draft tube is made with comparison of original draft tube.
|
guest ::
