|
|
Manufacture of aluminium alloy castings
Moravec, Lukáš ; Lána, Ivo (referee) ; Záděra, Antonín (advisor)
This thesis deals with the production of castings of aluminum alloys with a focus on a comparison of the melting process in the gas, crucible, tilting furnaces with melting in gas, shaft furnaces. Resolves proposal links the advantages of both types of melting furnaces into a single unit. The work includes economic evaluation of cost and projected savings in the operation of the new kiln unit.
|
|
|
Materials used in Aerospace Industry
Večeřa, Jiří ; Juliš, Martin (referee) ; Hutařová, Simona (advisor)
This bachelor’s thesis deals with contemporary aerospace materials. First part of this thesis is engaged in aircraft construction. There is description of the most important components of fuselage and jet engine, its function, various types and materials, which is used to its production. Other part is engaged in these materials. There are aluminum alloys, titanium base alloys, nickel and cobalt base superalloys, heat-resisting steels and composites.
|
|
|
The corrosion study of part aircraft at the site of spot welds in the salt spray environment
Němčíková, Eva ; Doležal, Pavel (referee) ; Pacal, Bohumil (advisor)
This bachelor’s thesis is focused on the corrosion study of part aircraft at the site of spot welds in the salt spray environment. The panel is made of sheet of aluminium alloy AlCu4Mg1, with surface coated with aluminium of purity 99,5 %, and of square shapes of alloy AlCu4Mg1, without coating. Square shapes are an angle cleat. The thesis deals with corrosion characteristics at the site of spot welds and in the area of contact between them. It deals with character of corrosion, frequency of occurrence and range of corrosive attack. From the data files were detected critical places of construction.
|
|
| |
|
| |
|
|
Comparison of selected mechanical properties of aluminum alloys and structural steels
Belháč, Jakub ; Svoboda, Pavel (referee) ; Vlašic, František (advisor)
The subject of this bachelor´s thesis is a description of selected mechanical properties of metal materials and their comparison within aluminium alloys and constructional steels. The most common mechanical tests to quantify the mechanical properties are described here. The mechanical properties of constructional steels and aluminium alloys are separately described in subsequent chapters as well as their division and possibilities of application. The connection between structure, chemical composition and mechanical properties depending on a heat-treating process is shown.
|
|
|
Influence of Temperature on Mechanical Properties of Alloy AlZn4Mg.
Slouka, Marek ; Podrábský, Tomáš (referee) ; Věchet, Stanislav (advisor)
This bachelor’s thesis deals with mechanical properties of a chosen aluminium alloy which is specified to preform. It is the alloy AlZn4Mg. Aluminium alloys are the most used constructive materials after iron alloys in this time. The importence of this alloys is great for their unique properties, e. g. a low density, a good corrosion - resistant, a good weldability in protective atmospheres. At first the Aluminium alloys mainly alloys of the high strength Al-Zn-Mg are described generally. Then this thesis is concerned with mechanical properties of the alloy AlZn4Mg in increased temperature. There is little information of this alloy in increased temperature in accessible scientific literature. This thesis completes the clear space in this branch.
|
|
| |
|
|
Technologické metody svařování hliníku a jeho slitin
Pavlík, Zdeněk
The diploma thesis deals with the technology of welding aluminum alloy AW 5754 by a method of arc welding TIG and with covered electrode. Introduction contains information about aluminum alloys and their labeling according to ČSN EN 573-1,2. Additional attention is focused on evaluation of the weld quality according to ISO 10042 and subsequent evaluation of the defects according to ISO 65 20 to 1. In the experimental section was welded samples tested at first by non-destructive methods (visual, capillary, X-ray testing) and followed by a destructive measurement of the weld (evaluation of micro-hardness, macroscopic and microscopic tests, tearing issues). Furthermore, part of weldments was subjected to a laboratory corrosion test in an aggressive environment of a salt chamber and then evaluating of mechanical properties of welds in both methods.
|
|
| |
guest ::
