National Repository of Grey Literature 44 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Draft block for dough processing
Novotný, Jan ; Vlašic, František (referee) ; Dvořáček, Jiří (advisor)
The Bachelor´s thesis deals with a structural design of a draft block of the placement of dough processing rollers, which are used for stiffening wheat dough in bakery lines intended for the production of common bakery products. The introduction gives a description of a bread and common bakery making production line. Next the thesis briefly deals with other possible dough-stiffening methods and with sanitary, structural and material requirements for food processing machinery. The structural part is devoted to a roller propulsion draft and a solution of a shift of one of the rollers. It contains a calculation of a worm gear, a load shaft calculation and a complete design documentary materials.
Design of appliance for assembling of sealing
Vávra, Jan ; Vlašic, František (referee) ; Prokeš, František (advisor)
The object of this bachelor thesis is designing and constructing plant for manual deployment rubber gasket while production connectors to cars. Part of the work is devoted general orientation the assembly plant, another part is devoted itself alternative solutions design variants and selection of appropriate alternative solutions. The reset of this work is 3D model of plant.
Amphibious off-road car with hydraulic drive
Nožka, Michal ; Vlašic, František (referee) ; Nevrlý, Josef (advisor)
The main purpose of this bachelor's thesis is a feasibility study of an amphibious off-road car with hydraulic drive. The first part of this thesis contains basic theory of amphibious vehicles and hydraulic drives of vehicles. The second part consists of chosen amphibious cars and their comparisons. Part of this thesis also suggests hydraulic components that could be used for construction of this car.
Desk for splitting semiautomatic
Jurák, Pavel ; Vlašic, František (referee) ; Dvořáček, Jiří (advisor)
The subject of the bachelor thesis is the design of the working table, which will ensure the stem lifting and its transport to the splitting semi-automat. Lifting of stem with weight up to 500 kg is ensured by lifting arms. Then, the stem is moved to the splitting semi-automatic by means of a belt conveyor. The design of the frame is designed to withstand a load of 5000 N. The lowest security has k = 1.2 according to the strength analysis. The table frame can be easily folded using a hydraulic cylinder. Thanks to this we can easily mount the frame behind a splitter semi-automatic and transport both devices at the same time.
Design of drive for malt germination line
Pochylý, Petr ; Vlašic, František (referee) ; Omasta, Milan (advisor)
This bachelor thesis deals with the construction of power lines and germination malt. The first part deals with the line itself and malting. The second part of this thesis describes the types technology of germination and technology transfers. The last part contains construction solution.
Construction of the impurities discharge arrangement for the settlement tank
Stodolák, Martin ; Vlašic, František (referee) ; Prokeš, František (advisor)
This bachelor’s thesis deals with construction of the impurities discharge arrangement for the settlement tanks. The thesis consists of several concurring parts. First part addresses current situation of surface wiping solution. Second part contains proposal of several solution options. Third part deals with construction solution of chosen variant. In the following part are figured out load parameters. Last part of thesis is dedicated to visualization and description of kinematics discharge arrangement.
Base frame´s oil system under the steam turbine and generator
Petržela, Zdeněk ; Vlašic, František (referee) ; Mazal, Pavel (advisor)
This bachelor thesis describes problematics of the lube system of steam turbines as an important part for its operation. The beginning of the thesis offers an overview of steam engine and steam turbine development both at home and abroad and its working cycle. The main part of the thesis discusses lube system functions and components. Next section contains a summary of required turbine oil properties and effects that affect the oil during working cycle. The conclusion of the thesis is focused on lube system operating problems, their causes, consequences and recommendations for their preventing.
Equipment for the semispinalis muscle training
Hlaváček, Pavel ; Vlašic, František (referee) ; Černý, Michal (advisor)
The bachelor thesis “The Machine for Exercising Semispinalis Muscles“ deals with the construction of the exercising machine for building up the strength of the above mentionet muscles. This thesis also includes information about other posibilities and the importance of strengthening this part of human body.
Scanning of acoustic emission signal by using waveguides
Bančák, Matej ; Vlašic, František (referee) ; Mazal, Pavel (advisor)
Bachelor thesis is focused on the issue of scanning acoustic emissions from the surface of solid body and scanning with the help of acoustic waveguide placed on the solid body. The work includes the review of the present ways of scanning acoustic emissions, options of installation waveguide and propagation of waves. The practical part is focused on the experiment, which compares measured values from the surface of the test body and from the waveguide. The measurement was realized on steel of the standard quality for using a measuring instrument Dakel Xedo. The next object of this work was try to attenuate the reflected signal, which is produced by the action of force on the test body.
Problem Solution of the Control Mechanism of the High Voltage Disconnector
Metelka, Jiří ; Dvořáček, Jiří (referee) ; Vlašic, František (advisor)
This Bachelor‘s thesis deals mainly with the design of a safety ball clutch for the control mechanism of a high voltage disconnector made by IVEP company. This work includes a short summary about disconnectors and safety couplings in general, with concrete examples of disconnectors by IVEP and construction examples of commercially used safety clutches from number of randomly selected producers. The thesis also contains component drawings, assembly drawing and a 3D model of the complete coupling. Attached are the control measurement results of the torque moment of the completed prototype.

National Repository of Grey Literature : 44 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.