|
|
Home automation system
Bajgl, Vojtěch ; Král, Jan (referee) ; Kubíček, Michal (advisor)
This thesis deals with home automation systems. First part of the thesis is focused on analysis of commercially available state-of-the-art systems. The most common ones are compared in terms of their functions, properties, principles of operation and their price. Second part of the thesis describes design and development of custom system for home automation. The aim is to build a cheap alternative to the commercially available systems. The design description starts from schematic design of particular components through PCB design to firmware and software development. The system is based on Raspberry PI 2B microcomputer which controls all the required home electronic equipment via user-friendly web-based interface. Several different ways of use of the system are discussed as well as some useful features of the microcomputer.
|
|
| |
|
|
Dynamic plantography
Grossmann, David ; Sekora, Jiří (referee) ; Balogh, Jaroslav (advisor)
This thesis contains introduction to the principles of dynamic plantography and it´s clinical application. Afterwards it is described feet anatomy, types of feet arch and human walking process. Next part describes principles of various types of tactile sensors and electrical platform Arduino. Most important part of this thesis is focused on teoretical design of device and it’s practical realization. The last part of diploma thesis is devoted to discussion of parameters of the device and to results of measuring of group of volunteers.
|
|
|
Measurement of greenhouse gas concentrations
Dohnal, Jan ; Novák, Vítězslav (referee) ; Bača, Petr (advisor)
This semester thesis deals with the greenhouse effect, various gases and methods of measurement. On the greenhouse effect is viewed from its historical dating, despite changes in atmospheric composition and reactions of individual institutions. It contains a theoretical analysis of the individual gases. It focuses on the most harmful greenhouse gases such as water vapor, carbon dioxide, nitrous oxide, methane, ozone, chlorofluorocarbons and halons. Analysis methods for detection of gaseous substances. Part of this work is focus on the detection of nitrogen dioxide and chloro-fluorocarbon. The data is processed using a microcontroller and then sent to an Internet server thingspeak.com. If the device proves successful, will be used as a laboratory exercise in the course Ecology in electronics.
|
|
|
Design and implementation of managed PoE injector
Frkal, Pavel ; Frolka, Jakub (referee) ; Krajsa, Ondřej (advisor)
This study deals with power supply for network devices using existing structured cabling. Various power supplies are analysed including their limitations and also deals with measuring of the consumed energy. The outcome is 24-port passive PoE injector for remote power supply of network equipment. It's suitable namely for remote devices which lacks built-in PoE support as these do not need major modifications (using passive injection). Power options including current measurement may be done via administrative web interface.
|
|
|
Educational KIT for MBED platform
Maštálka, Daniel ; Levek, Vladimír (referee) ; Šteffan, Pavel (advisor)
Thesis is about new educational kit based on Nucleo platform, which uses mbed developer compiler. Educational kit is being designed with peripherals which are warranted. Also mbed compiler is descibed and manual is written for it. In last chapter there are five slideshows made for lectures. And five exercises which are realized by students in classroom.
|
|
|
Arterial Puncture Simulator
Martincová, Kateřina ; Szabó, Zoltán (referee) ; Friedl, Martin (advisor)
The topic of this smestral thesis is to design arterial puncture simulator, which could be used as a device for teaching first aid. At first there are presented and described simulators available on the market. Followed by the analysis of individual components that were selected for the construction of the simulator. The control unit, which switches the bistable valve is realized by Arduino. Liquid jetting is facilitated by expansion container. The result of this thesis is design and testing of components of prototype arterial puncture simulator.
|
|
|
Camera Positioning Device
Berčík, Vojtěch ; Toman, Marek (referee) ; Červinka, Dalibor (advisor)
This master’s thesis deals with the design of a drive for a camera positioning device that could be used for shooting videos and timelapses. The optimal drive and power supply as well as the steering program based on the Arduino platform program are developed. The construction prototype adapted for printing at 3D printers is also designed. The whole system is then produced and tested.
|
|
|
Smart metering
Lahodný, Libor ; Hrabina, Jan (referee) ; Szabó, Zoltán (advisor)
Semester paper describes the design of smart sockets and their management. Sockets are wirelessly controlled by a central unit. The socket has an integrated sensor, designed to measure current consumption of the device. If necessary, it can remotely disconnect the unit plugged in socket from AC network. Work includes analysis of individual system elements, design of electrical schematics and PCB. In the construction is included ethernet module, which is used to display data using a computer.. The device has been constructed and tested.
|
|
|
Embedded System with Communication Interface NFC and Wi-Fi
Bugár, Loránt ; Valach, Soběslav (referee) ; Horák, Karel (advisor)
This master’s thesis deals with communication system design via the NFC and Wi-Fi interface. The thesis has two basic goals. The first goal is to create a device that is capable of storing of data and its subsequent transfer via the NFC interface. The second aim is to utilize this device for measuring various physical variables. The IoT technology is employed to fulfill the aforementioned goal. IoT technology is capable of visualizing data in real time and make them accessible via the Internet. The result of this work is an universal device, that contains the most popular communication interfaces, such as I2C, SPI and that is capable of processing measurement data from digital, analogue, and wireless sensors.
|
guest ::
