|
|
Environmental solution of a house with a café in Zaječí
Medková, Tereza ; Uher, Pavel (referee) ; Rubina, Aleš (advisor)
In my master's project I design a nearly zero energy consumption house with a café in Zaječí. The 1ST part of this project deals with a structural part of the building, which has two above-ground floors and basement. On the basement are storerooms and rooms for technical equipment, on the ground floor is café and living room with kitchen, and on the second floor are bedrooms, bathrooms and cloakrooms. Footings are from cast-in-place concrete, the load bearing walls on basement are from formwork blocks with cast-in-place concrete, on above-ground floors are from ceramic blocks and every non-load bearing walls are also from ceramic blocks. On whole floor are reinforced concrete floor slab and flat green roof. The 2ND part deals with technical equipment of the building. There are gas boiler, floor heating, air conditioning, mechanical ventilation (HVAC), photovoltaics panels with energy storage, retention tank, external blinds and biodynamic lighting. The 3RD part compares several options for using solar energy in combination with different heat sources in terms of energy and economic efficiency of the building.
|
|
|
Working of radiators
Mašek, Miroslav ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with the operation of radiators. It is divided into three parts. The first part describes the various types of radiators and heating surfaces, radiator control and heat measurement, the second part deals with the design of heating and hot water in an apartment building in Brno in two variants of the conceptual solution and the third part is processed in the form of experimental measurements issues of radiator operation during a real day in the heating season and operating conditions that may occur.
|
|
|
Heating and ventilation in the "Doubrava" family house
Jirsová, Tereza ; Pech, Ondřej (referee) ; Charvát, Pavel (advisor)
The diploma thesis is focused on the design of heating and forced ventilation for the project of the family house Doubrava. In the first two chapters is briefly described the theory and there is also described the project of the family house. The next chapter deals with the design of the forced equal pressure ventilation with the heat and moisture recovery. Than the heat loss are calculated according to the norm ČSN EN 12831-1. The next part is focused on the design of heating system and the heat source for the family house Doubrava. There is described detailed design of the floor heating, including necessary calculations, and also the type of the heat pump, as the heat source and source for hot water heating, is chosen. This part also contains a selection of expansion tank and safety valve and approximate calculation of the size of the primar circuit. The last part deals with the possibilities of using renewable energy sources. At the end of the thesis, there are more detailed results of the calculations and the mechanical drawings of individual designs of the ventilation and heating system and also there are tables of the acquisition costs.
|
|
|
City hall with a multifunctional space
Zabáková, Laura ; Machová, Petra (referee) ; Vajkay, František (advisor)
The main task of the master project is to design a nearly zero energy local council building with multipurpose hall in Syrovice cadastral area. It is a three-storey building with basement. In the basement there are technical facilities and garage. Ground floor includes conference room, multipurpose hall, kitchen, cloak room and toilets. First floor includes offices, archive, staff kitchen and toilets. The building’s vertical load-bearing structures are a combination of ceramic block masonry and reinforced concrete columns. Envelope walls are insulated with mineral wool and XPS. The floor slabs and the staircase are designed from cast-in-place reinforced concrete. The building has flat extensive green roofs with photovoltaics installation. The building is equipped with HVAC system with mechanical ventilation with heat-recovery, floor heating and cooling supplied by a ground-water heat pump. The building is also equipped with rainwater accumulation system supplying rainwater for the toilets and watering.
|
|
|
Heating and cooling systems
Pavlíček, Radek ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is large area heating and cooling systems. Theoretical part of this thesis is focused on thermal comfort of people in interier and on theoretical calculation of heat transfer and on large area heating and cooling systems. Second part is devided to two variants. First variant is design of a heating system in kindergarden with floor heating combined with plate heating radiators. Second variant is heating system with only plate heating radiators. As source of heat is used condensing gas boiler. Part of a design is preparation of hot water. Experimental part of the thesis contains measurements of coefficient of heat transfer in floor heating and wall heating.
|
|
|
Systems of energy efficient buildings
Šlampová, Kateřina ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is systems of energy efficient buildings with a focus on the building envelope. The first theoretical part describes the quantities that we consider when designing the building envelope. The second half of the theoretical part is with reference to the experimental part of the thesis focused on a special type of vertical perimeter structure, namely walls with live vegetation installed from the outside of the structure. The second, practical part of this work, deals with the design of heating and hot water supply for a multifunctional building. The design is elaborated in two variants - heating by means of radiators in the first variant and in the second variant by means of floor heating for residential units of the solved building. The third part define an experiment, which had the task of comparing the measured quantities on two types of vertical perimeter structures, namely a structure with growing greenery from the outside and an identical structure only without a layer of greenery. At the same time, the task was to check the possible influence of the applied greenery on heat losses, and thus the design of the heating system.
|
|
|
New Technologies for Family House Heating
Bořil, Martin ; Brázdil, Marian (referee) ; Lisý, Martin (advisor)
The subject of this bachelors thesis is a new technology for family house heating. The first part will be about searching available solutions on the market. In the second part, this knowledge will be applied to a real house with already instaled heating system for comparing with other heating methods.
|
|
|
Energy retrofit of a stand-alone house
Stupka, Jaroslav ; Pech, Ondřej (referee) ; Charvát, Pavel (advisor)
The aim of the master’s thesis was to design heating, ventilation and cooling systems and to evaluate possibility of using renewable sources in case of a reconstructed two-storey family house. Air to water heat pump and floor system were designed to ensure both heating and cooling supply in the building. A heat recovery ventilation system was proposed. Gains of electrical energy from photovoltaic array were calculated and then possibility of coverage the heat pump consumption was evaluated. The thesis contains required calculations including building heat losses, heat gains, air exchange rates and the dimensioning of all mentioned systems. Technical drawing is also comprised.
|
|
|
Heating of nursery school building
Nečas, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The bachelor's thesis deals with the design of a kindergarten heating. The theoretical part presents the heat pumps. The calculation part describes a specific design of heating for kindergarten for 54 children by a low-temperature system with a combination of underfloor heating and radiators, a proposal for the preparation of hot water and other necessary equipment of the system. A system of two air-to-water heat pumps is designed as a heat source. Forced ventilation is provided by an air handling unit. The building is designed as a building with almost zero energy consumption
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
guest ::
