|
|
Sports and cultural centre, Otradov
Myška, Jan ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis is the preparation of project documentation for the implementation of new sports and cultural centre Otradov. The dominant feature of the complex objects stands and multipurpose hall. The building is architecturally designed with an effort to fit in too much of rural architecture. Multipurpose hall has two floors, one third roofed flat roof, two-thirds of the roof ridge. The core system is aerated concrete blocks. The building is two-storey grandstand with the carrier deck. Roofing is solved by means of broken wooden beams. Sanitary facilities is dealt wall system and roofed shed roof. Athletics track, the surface of the polyurethane mixture designed for sports.
|
|
|
Car dealership with auto repair shop
Wilkonský, Roman ; Vašíček, Vladimír (referee) ; Kacálek, Petr (advisor)
This diploma thesis is being solved for documentation of building in the stage of execution. The building is designed as a showroom with car repair shop. The building site is located in the land registry of Ostrava – Vítkovice. Project documentation is designed accordingly to the valid Czech Republic’s laws, bills and building standards. The building is divided into two objects the first one is showroom with administration and the second one is the car repair shop with washing room and restrooms. These two objects are structurally and operationally connected. The largest plan dimensions are 68,56 x 38,36 m. The building is designed as a reinforced concrete frame in the administrative part and a reinforced concrete wall system in the car repair part. The roof is in both cases realized by using steel trusses. The reinforced concrete frame is lined with aerated concrete masonry. In the roof part it is cladded with sandwich steel panels. The building is founded on reinforced concrete foundation pads with combination of strip foundations. The car repair shop is designed as one floor building, whereas the administrative part is designed as two floor.
|
|
|
Development of a new self-supporting insulation system with respect to dynamic stress
Machala, David ; Frajt, Daniel (referee) ; Drochytka, Rostislav (advisor)
This diploma thesis deals with suggestion of self-supporting insulating system that can be used for objects which insulating is more or less complicated. In this thesis are theoretically processed information about insulation systems while focus is on their structure, composition and principle of operation. Further, there is theoretically designed self-supporting insulating system which is practically built after theoretically composed testing for finding its basic properties. The most appropriate process of realization is formulated at the end after evaluation of the individual tests.
|
|
|
Control system of the concrete batch process
Macej, Maroš ; Zemanek,, Pavel (referee) ; Zezulka, František (advisor)
The work presents a control system for energy savings using the recycling of steam in autoclaving process of porous blocks. This work describes a manufacturing process of porous. The control system is based on programmable controllers from Siemens series S7-300, then is applied to the TIA Portal software for the programming of these units. Lastly, the work comprises of process simulation, control system and its subsequent visualization.
|
|
|
The preparation of cellular concrete for insulating purposes
Koutný, Ondřej ; Šiler, Pavel (referee) ; Opravil, Tomáš (advisor)
In these days of economic crisis subsiding, in the civil engineering the attention is pointed especially to the systems, which effectively reduce energy and decrease costs associated with using of residential or industrial premises. Especially the heat-insulating systems are mentioned, because of their characteristics and construction which will be applied economical solutions. It is possible to use the materials based on aerated concrete which excel within construction materials due to its heat-insulating properties. The use of this material for clearly heat-insulations seems to be fully-fledged alternative to standard heat-insulating systems also due to combination of nature character and sufficient strength. This work deals with possibility of preparation non-bearing, heat-insulating material based on autoclaved aerated concrete with volume weight under 200 kg/m3.
|
|
|
Study of usabiliti of sands for preparation of aeroconcrete in hydrotermal condition
Straka, Radek ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
A building industry is expanding branch all the time and it intervenes in the life of everyone. Aeroconcrete is very attractive and actual subject nowadays because economy is important point of view of production. This material finds a wide-spread use thanks to its specific properties. The good manipulation and great thermal insulating properties are secured by its porous structure. Furthermore, proper material selection provides a saving of power of house for every customer demands. Due to aeroconcrete's sufficient compressive strength it is useful for both constructions and internal walls. Fundamental and very important for final material properties is raw material composition of aeroconcrete. A relationship between composition of filler (quartz sand) and resultant properties of aeroconcrete is an objective of the thesis.
|
|
|
The technology of aerated concrete
Zezulová, Anežka ; Kalina, Lukáš (referee) ; Opravil, Tomáš (advisor)
The technology of aerated concrete is a topic that is permanently studied and developed because of the incessant demand for a building material which ensures relatively high strength at low volume weight. This bachelor’s thesis examines the influence of replacing a part of sand with another silica material – microsilica. The increase of mechanical strength is expected at the same volume weight. Microsilica contents around 98 % of amorphous silicon dioxide with a high specific surface area that is substantially higher than a specific surface area of a ground sand. The reactivity of silicon dioxide increases with a higher specific surface area and also with the creation of a mineral tobermorite, which is the keeper of the strength in autoclaved aerated concrete. Three types of microsilica were chosen to examine the influence of replacing a part of sand with microsilica according to their availability for manufacture: microsilica Sikron and Elkem 971 U, microsilica Grace Davison was tested only marginally. Tests were carried out to determine volume weight, compressive strength, phase composition (by X-Ray diffraction method), and the content of tobermorit (by TG-DTA method).
|
|
|
The technology of aerated concrete
Koutný, Ondřej ; Repka, Martin (referee) ; Opravil, Tomáš (advisor)
Civil engineering is integral part of industry in each developed country. Naturally the construction point does not play the main role here, but also the material of building segments. In last fifty years the new possibility has been discovered against classic brick in form of autoclaved aerated concrete. This material gathers its customers not only due to low weight and easy application with sufficient strength, but particularly due to excellent heat-insulation properties. Contemporary trend in research of aerated concrete points to application of alternative raws, as for example metakaoline, to improve final properties of product by preserving of current technology and price.
|
|
|
Detached Family Residence
Kolegar, Benjamin ; Omishore, Ayodeji (referee) ; Vajkay, František (advisor)
The subject of bachelor's thesis is project of detached family house for a family of four in Hrušovany u Brna. The building has two floors, without basement and with attached garage. The designed material for loadbearing and non-loadbearing constructions is porous concrete blocks. The residential part of the building is covered by gable roof.
|
|
|
Application of foaming agents for the production of lightweight materials
Kramná, Adéla ; Vyšvařil, Martin (referee) ; Rovnaník, Pavel (advisor)
Use of lightweight building materials came to forefront in recent decades. The most commonly used materials are aerated and foam concrete but also other materials such as foamed geopolymer have been introduced. This study examines foaming methods of various lightweight building materials which are analysed and evaluated in terms of properties in hardened state. An effect of foaming agent on the structure of the material and its porosity was examined by image analysis using an optical microscope.
|
guest ::
