|
|
Optimization of Flat House Heating
Fodor, Ján ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the supply of heat in a particular block of flats in Brno. It deals with supply for heating and for hot water heating. The introduction gives information about the considerated building and also generally, but especially with regard to the current situation with consumption and heat supply. Subsequently, the thesis describes the individual possibilities of obtaining heat. There are mentioned classical heat sources as gas boilers, but also less commonly used as co-generating units or solar collectors. Furthermore, the work is calculating from the technical and economic point of view for heating options chosen by the investor. Finally, the work compares the options from viewpoint of benefits, budgets and returns of possible investments.
|
|
|
Residential house with commercial space
Pevný, Tomáš ; Pospíšil, Jaroslav (referee) ; Šuhajdová, Eva (advisor)
The subject of this thesis is to work out the project documentation for a residential building with commercial spaces in cadastral area of Trenčianske Stankovce, part Malé Stankovce. Residential building with commercial spaces is divided into two architecturally connected units. Residential building consists of one underground and three floors. Commercial spaces are designed as a fitness center with the underground floor. The floor plan of this complex is designed in the shape of a letter V. Construction system is longitudinal, wall made. Vertical supporting structures of the house are mainly made by the system POROTHERM. Other vertical and horizontal structures are made of reinforced concrete. In the commercial part of the project there are horizontal structures designed from prestressed ceiling panels SPIROLL. The roof of the residential building is designed as a single-shell flat roof. The roof above the commercial spaces is made as single-shell flat extensive vegetative roof. The drawing part is made with the AutoCAD software.
|
|
|
Residential Building
Melo, Jaroslav ; Spáčil, Miroslav (referee) ; Brukner, Bohuslav (advisor)
Diploma thesis solves the new building in Nitra. The building is located on Kmeťová street. The building has four floors above ground and one underground and the Garage. 1st floor is clinic. Other floors are for apartments .. The structural system is a monolithic reinforced concrete and brick. The building is covered with a flat roof. Foundation structure consists of reinforced concrete block.
|
|
| |
|
| |
|
|
The apartment house in Tišnov
Egerová, Tereza ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Tišnově. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 37 m. The building has 4 floors and a flat roof. The building is made of ceramic bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 12 apartments, one of which is completely wheelchair. There are also 6 separate garages on the first floor.
|
|
|
The apartment house in Horní Loučky
Šmídková, Michaela ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The topic of the thesis is the design of new residential building in Horni Loucky. The aim is to develop detailed documentation for construction. The work includes studies, drawings, text and part of the calculation. It is a detached residential building with ground plan dimensions of approximately 13.5 x 16,75 m. The building has 4 floors and a flat roof. The building is made of sand-lime bricks, ceilings are monolithic reinforced concrete. Roofing is made up of single shell flat roof. The building is located on undeveloped land in housing estates on flat terrain. Residential building contains 5 apartments, one of which is completely wheelchair and one workshop (eg hairdressing). At the building will be constructed parking area for the residents of the apartment building and premises.
|
|
|
Technological stage of rough superstructure of apartment building
Mičegová, Jana ; Venkrbec, Václav (referee) ; Čech, David (advisor)
Subject of this bachelor’s thesis is the technological stage of rough superstructure of apartment building in Tvarožná. This work includes technological specification for masonry constructions and for monolithic ceilings, technical report, equipment of the construction site, mechanical assembly design, supervisory and test plan, health and safety plan and analysis of financial and time aspects of the building process.
|
|
|
Multipurpose facility - Brno-Bystrc, ulice Kamechy
Petráš, Vladimír ; Jelínek, Petr (referee) ; Eliáš, Luboš (advisor)
The aim of this bachelor thesis is a project of a new building of a multipurpose facility with six floors. Multipurpose facility is situated in the cadastral area Brno – Bytrc. This place is situated on the suburb of the city Brno. Multipurpose facility is free standing and it´s partially with a basement. There is one basement floor and five floors in this building. Four flats are designed for living of family of 4 members. The next two maisonettes are designed for six people. There is a coffee–bar and a garage with a six parking places. In the maisonettes there is a green roof on the roof of a four floor of this building, which is designed for a terrace. The roofs of this building is designed as a flat roofs. The building has a brick blocks construction. The facade of building is insualted by direct external insulation system. Documentation of the bachelor thesis is prepared for the building contruction. The graphical part of documentation has been processed in the Autodesk Autocad software.
|
|
|
Realization of rough upper construction of a residential building in the Tatranská Lomnice
Šifrová, Sláva ; Štěrba, Martin (referee) ; Novotný, Michal (advisor)
The object of this work is to address the technological stages gross surface works focusing on vertical structures masonry apartment building in the Tatranska Lomnica. The work is handled by the technical design of the building management, technological prescription bricklaying, compare several variants of material, design of machine assembly, situation constructions, technical management equipment, inspection and test plan, job security, time and financial plans.
|
guest ::
