|
|
Production of a rotating vessel
Novák, Václav ; Žák, Ladislav (referee) ; Císařová, Michaela (advisor)
The thesis is concerned with the concept of an rotating vessel, that is a part of cotton candy machine. A drawing is cylindrical shape with circular a hole in the bottom, which is made of austenitic chrome-nickel steel 1.4301 with the thickness 1,5 mm. Due to the production volume 50 000 units per year, the pulling technology without wall thinning was choosen. The process of drawing will be performer in one operation. Due to calculated force, the ZHS 400 hydraulic press with a nominal force of 4 000 kN was chosen.
|
|
|
Design of two-axis linear measuring device for railroad axles pressing
Mlynář, Vojtěch ; Vejlupek, Josef (referee) ; Brablc, Martin (advisor)
The main goal of this bachelor's thesis is the design of the device capable of measuring the distance between railroad wheelset elements during pressing. The research part presents the parameters of the wheelset press and the existing solutions to the problem. Additionally, distance-measuring sensors, motor sizing methods, and sensitivity analysis methods are described. The third chapter outlines the design process, beginning with early conceptions, their analysis, and leading into the final design.
|
|
|
Production of drinker
Vašíček, Jan ; Dvořák, Milan (referee) ; Císařová, Michaela (advisor)
The diploma thesis of the master's study in the field of M2I-K presents a design of a hollow rotating part made of metal sheet with a tapering bottom. Deep drawing technology was chosen as the best suited option for production without thinning the wall. Stainless steel was chosen as a source material for production parts in compliance to ČSN 172 40. The drinker is produced by three drawing operations where each operation is performed separately on a standalone press CTH 250 developed by ŽĎAS a. s. A sheet measuring 1500 x 3000 x 1 mm with diameter 428 mm was evaluated as the most economically viable for production of a semi-finished product – rondel. For one year production produced in a series of annual volume 100,000 pieces.
|
|
|
Workshop straightening hydraulic press
Ožvoldík, Daniel ; Tůma, Jiří (referee) ; Omes, Jiří (advisor)
This work deals with the design of a hydraulic workshop straightening press. This press is used primarily for basic operations needed in manufacture, such as straightening the steel plates or shafts. Furthermore, it is be used for bearing assembly or bending metal sheets. The essential parts of this work are the design of the electro-hydraulic circuit, the design of moving the press frame and the analysis of the mechanics of the material.
|
|
|
Workshop hydraulic press
Simandl, Tomáš ; Štěpánek, Vojtěch (referee) ; Omes, Jiří (advisor)
This work deals with design of workshop hydraulic press, which is used for basic forming and assembling. In this work will be shown basic principes and dimensions of hydraulic presses, It will show categories of hydraulic presses based on technology of use. We will design hydraulic press adjustment, hydraulic parts and frame of the hydraulic press.
|
|
|
Design of pneumatic - hydraulic press
Tůma, Vladimír ; Vetiška, Jan (referee) ; Pavlík, Jan (advisor)
The goal of this bachelor thesis is to design a small pneumatic-hydraulic press for the widest possible workshop and car repair shop usage. The beginning of the paper is devoted to general facts and other useful information regarding the topic, the principles of hydraulics and a research of the current domestic as well as foreign market. In the main part of the paper, several possibilities of solutions as well as the design of the press itself with all required parameters including the computational and drawing documentation are discussed. The processes of production, assembly and overall commissioning of the machine are also incorporated in the paper.
|
|
|
Design of briquetting press for metal chips
Matušková, Adéla ; Jelenčík, Branislav (referee) ; Sládek, Josef (advisor)
This dissertation deals with design of briquetting press of metal splinters. Dissertation reacts to non-complexity of solutions of present products. Goal is to raise the attractivity of the machine and related increase in awareness of this machine with ecological and economic benefits. Dissertation emphasizes preservation of functionality, consideration of ergonomics and safety of the machine.
|
|
|
Production of gully
Švejda, Jakub ; Jopek, Miroslav (referee) ; Podaný, Kamil (advisor)
The project elaborated design of technology production of the gully – the rotational extract with flange from the deep drawing corrosion resistant sheet iron 1.4301. Pursuant to of the literary pursuit and calculation was designed drawing without thinning the wall in two operation and that in one instrument with two bottom holders enabling their combination into one stroke. The drawing instrument makes use of as standardised components as construction elements calculated using calculations and consist of three parts. The bottom and upper are magnetically clamped on the hydraulic drawing press Dieffenbacher PO 250, with nominal tensile force 2500 kN. Both drawing punches and drawing dies are produced from alloyed instrumental steel 19 436.9 heat-worked according to drawing documentation.
|
|
|
Design of small hydraulic press with "C" frame
Gregor, Radek ; Tůma, Jiří (referee) ; Pavlík, Jan (advisor)
The main goal of this bachelor thesis is construction of small hydraulic press with force of 200 kN. With that comes topics like calculations of hydraulic circuit and it‘s compilation and calculation of the frame with it‘s construction. With the help of those two main topics we will be able to assemble whole hydraulic press machine. After completion of calculations and simulations, arises technical documentation of the machine.
|
|
|
Marketing Mix of a Selected Engineering Company on B2B Market in Russia
Kozlova, Elena ; Plíhal, Petr (referee) ; Milichovský, František (advisor)
This diploma thesis is focused on marketing mix of a concrete company, which is operating in international environment. The thesis is divided into three main parts. The theoretical part describes basic concepts related to the topic. The analalytical part of the thesis focuses on the business environment of company Dieffenbacher CZ, assuming its future expansion to Russian market, while the results obtained are further summarized in SWOT analysis. The practical part offers proposals and recommendations from the perstective of marketing mix for successful entry of a selected engineering company to Russian market based on the findings from the complied analyses and theoretical concepts.
|
guest ::
