|
|
Design of a test rig for a wear test of inner ball joints
Blecha, Martin ; Pavlík, Jan (referee) ; Knoflíček, Radek (advisor)
This diploma thesis deals with the design of several variants of test rig for tests of axial ball joints of passenger cars. The individual design variants are evaluated based on the evaluation matrix and then the best option is selected. Selected proposal includes a complete design including 3D models and strength analyses that focus on the most stressed construction nodes. These design nodes are solved using the finite element method. Hydraulics and hydraulic elements are equipped by the existing equipment from a test lab. At the end of this thesis is solved risk analysis of the new construction and its economic evaluation.
|
|
|
Semi-solid alloys testing device
Valíček, Václav ; Bastl, Michal (referee) ; Chalupa, Jan (advisor)
This thesis deals with design of semi-sollid alloy testing device. In the beginning, there are briefly introduced possibilities of semi-solid alloy exporation followed by analysis of temperature measurement options, torque measurement options and control of the thermal system. There was build development version of construction and electronics based on results of analysis. The outcomes of this thesis are: design of printed circuit board based on electronics prototype connection, production of mechanical parts for device and realization of user interface in form of touch screen.
|
|
|
Laboratory simulator of radial journal bearing
Vincenc, Jan ; Čermák, Jan (referee) ; Šperka, Petr (advisor)
The master’s thesis deals with a design of a radial journal bearing simulator, which is ready to implement a transparent sapphire journal bearing to an optical observation of the oil film. The first part of this thesis contains a short review of a few currently used journal bearing test rigs. The next part of the work deals with a discussion of concept variants and a definition of important parameters. The last part contains a detailed description of the designed radial journal bearing simulator. Limitations of the designed simulator and recommendations for future improvements are also discussed. The result of the presented work is the designed journal bearing simulator which will allow observing of the oil film. The work also consists a complete design documentation.
|
|
|
Adaptation of shock absorbers testing device on contact fatigue testing of dynamically loaded surfaces
Nepovím, Lukáš ; Čípek, Pavel (referee) ; Dvořáček, Jiří (advisor)
This bachelor’s thesis deals with the design of an adapter for the modification of a test device, where the automatic tensioners (dampers) of automotive belts are tested. The proposed adapter allows to test the functionality of the valve tappet assembly. The design of a simple test methodology is also a part of the solution. The first part of the thesis deals with the overview of the given issue. Subsequently, the design variants of the adapter and the loading methodology of the tested component are proposed. The main part describes the design of the adapter, the method of lubrication of the tested component, the measuring equipment used in the experimental test and the design of the test methodology. The complete drawing documentation of the adapter is the output of this work.
|
|
|
Proposal of test equipment/method for quick verification of quality of welded joints
Zejda, Václav ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
This bachelor’s thesis is dealing with the proposal and the choice of the proper method for quick check of weld seams of ball pivot of automobile stabilizers created by the resistance welding method. The first, theoretical part deals with the resistance welding. The second part deals with a description of the production process and testing of the particular component. The last part contains personal proposals and an assessment of the suitability of use of each construction solution of simple mechanical devices for quality checking of the weld seam. The recommended method to use is the Charpy impact test which served as the base for designing the special test device.
|
|
|
Design and implementation of journal bearing test rig
Kučera, Petr ; Repka, Martin (referee) ; Omasta, Milan (advisor)
This diploma thesis is dedicated to mechnical desing, fabrication and assembly of experimental bearing testing rig. First part of the document contains research of current knowlege in the field of bearing testing and desings of currently used machines. In second part is conception of the testing rig described. Third part contains description of design variations that were designed. In Discussion is comented choices of final variants. Last part is dedicated to functional verification of the whole testing rig by first series of the tests.
|
|
|
Proposal crosshead test equipment
Šilar, Tomáš ; Frýza, Josef (referee) ; Brandejs, Jan (advisor)
This thesis deals with structural design of testing device for moving parts of refrigerating devices, including functional design of drives, mechanical protection against overload and 3 design types of handles are included as well. First part describes appropriate selection of drive. Following part deals with calculations of spheroidal screw durability and calculations of mechanical protection. Final part consists of the design itself and technical drawings, according to which was the machine produced.
|
|
|
Mechanical design of stend for lower limbs prostheses dynamic testing
Taufer, Tomáš ; Robenek, Dětřich (referee) ; Paloušek, David (advisor)
This work describes design and realization of testing device for dynamic tests of foot prosthesis, made by methods of Rapid prototyping. Primary objective of design is to imitate the load on prosthesis during human gait. This task is accomplished by swing motion of prosthesis inside the frame of device during the loading of heel and tiptoe. Loading components can be removed and changed so the device can be used for different measurement like walking on an inclined plane. The result of this work is fully functional device including control program with many options to control the test. The result of test is to decide whether the foot prosthesis withstands the set of cyclic loads. The area of development of prosthesis by additive methods is young for the time being. It stands out especially with different materials, design, structure of prosthesis and fast process of production. Therefore this device can be used for testing of fatigue life of prosthesis made by additive methods.
|
|
| |
|
|
Testing of Distance Protection
Řehoř, Jiří ; Topolánek, David (referee) ; Orságová, Jaroslava (advisor)
The testing of distance protection in bachelor´s task is made a distinction between protection, requirements and relegation. This testing is also consisted in principle of function, describing terms of distance protection and comparing with time-current characteristics. The next step after short estimation was describing digital distance protection SIPROTEC 7SA511. The advantages are included in this estimation. The next part contains some configurations and connections with a test equipment in order to take control of measuring through the computer. The extended configurations are also comprised of two programms – DIGSY and TZO3. We had to make a suggestion of suitable methodics for measuring a time-current characteristic. We carried out three measurements where the test equipment was set to role of type TREND. A magnitude is generated at the output that is changed linearly in time with required rate (speed). We changed a current IX1 for our measurements that was undertaken with a rate of current rise. This process was given by a test equipment when the set values were constant. In the second measurement we modified a size of shift phase in the test equipment. In the third measurement we tried to set up different sizes of particular impedance characteristics (zone) inside of the distance protection where was set a neutral breaking time for the measured zone. On the contrary, the previous measurements had an absolute time.We have introduced evaluated results of measuring and observations in the end of this bachelor’s thesis.
|
guest ::
