|
|
Progress in technology of mold milling with coated profile tools
Doležel, Ondřej ; Bumbálek, Bohumil (referee) ; Píška, Miroslav (advisor)
This diploma thesis is involved in possible development of different types of milling molds coated with modern plows. The first part is devoted to an analysis of contemporary trends in forms production technology. The analysis includes the different types of machines and tools for making various kinds of molds and dies. Another part deals with design of dies for sheet metal shears. The thesis continues by design of the production procedure after heat treatment and finishing die by miling. For milling of die are designed miling tools, the NC program and the possible development of manufacturing the die using a new machining center and the possibility of production optimization. The penultimate point of the thesis is technical and economical evaluation of the direction of development and comparison of positives and negatoves of each method. At the final evaluation is all summed up.
|
|
|
Renewal of the Mill Grounds In Tasovice
Popelka, Antonín ; Eichler, Zdeněk (referee) ; Ponešová, Barbora (advisor)
Renewal of the Mill Grounds in Tasovice project presents a strategy of a feasible approach to the buildings with a historical value in baroque landscapes of the South Moravia. In three steps the project consequently restores the life and re-joins torn socio-cultural interconnections in a municipality affected by destiny of the Sudetenland landscapes. The strategy derives from local singularities and cultural heritage. In the first phase a mini-brewery and confectionery come into existence. This reflects already existing phenomenons in the municipality. The second phase brings restaurant with variable cultural space, emphasizing local patriotism. In the third phase, the Mill Grounds are extended by services, such as accomodation, events and workshops, info centre, and open itself to the tourism. Presented project preserves current constructions and structures as much as possible and lets excell the structures with a historical value. The original historical constructions are handled in traditional materials (brick, stone, wood), new structures are in glas and corten metal.
|
|
|
Tomioka Mill
Šnyrch, Marek ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
The supervising teacher of the Thesis chose two bulidings to be the subject of solution, which were used as warehouses of cocoons. These are the biggest buildings of the premises as for the volume, which stand out for their impressing construction and their area (1493,1 & 1486,6 m2). The distance between them is aprox. 125 m. The systém of construction is the same in both the buildings, it is a wooden timber reinforced brick masonry frame in modular size of 3,6 x 6,15 m. The constructive height of street floor of building A is 4,4 m, building B 3,85 m. The clearence of bulinding A is 3,85 m and for building B 3,27m. The clearance of second floor in both objects is 4,84m. The existing inner staircase has one arm and is of 54 cm in width. There is a cargo lift on its … covered by … for the connecting the floor areas. … … of both the building forms together with wooden pillars elements also … . The windows of 160 cm width are set rytmicaly in three consecutive rows, they ensure max lighting of the interior of the buildings. The roofing of the buildings is made from wooden frame structure and covered by tiles. The roof construction is not covered from bottom and therefor they make an impression of one of the most striking elements in the interior. The clean dispositions, the lenght of the halls of 104 m to the adequate width, the clean construction both the brick and the wooden ones, together with impressive lighting, the all form an enormous value resulting in a unique character as a whole.
|
|
|
The Municipal Baths
Adamsonová, Kristína ; Javůrek, Radim (referee) ; Mikulášek, David (advisor)
ARCHITECTURE The centre and entrance point for atrection a relx is terace with pool, with corridor to cafe and skylights that leads to reception. Around this atrium, there is a ramp, rising up. Pools are not see n ko the screens are individual attractions, atmosphere. The height change of each pool, sauna and whether this involves physical effort is rewarded with open views to the surroundings and relax themselves. Entering the building through a covered, but bright bay, passage is a continuation of the street fishing. Thus the very end of the reception side. Thus eliminate the problem of a parcel which is like a scene out of town. Layout In the passages suggest leaving the car park, Kafe-bar with a simple menu and fresh multifunctional workshop, creative playground. It is known fact, that in the old spa locations to find valuable pieces of pottery, small painting and sculpture and other artifacts that speak of links with the vivacious work, relax, relax with a manual and spiritual. This room will also serve as a nursery for parents resting in the spa, in the specified date and time. Upon entering the spa itself, the reception with high ceilings and skylights from the terrace, the visitor to the issue of changing rooms with bathroom facilities. Consequently, the choice whether to receive the attractions, or go down to the fitness center or gym. Another option is to move the spa itself. In the direction from the top down it is pliable dough, the blood will get the opposite route, in which the visitor shall issue a physical effort. 2np In addition to coffee for guests only and exit to the terrace, and massage booths are located. Much of the area occupied by the technical room, spa bath as well as administration. On the next floor guest vystkytne a larger foyer, drinking KURO room and swimming and first aid. Glass facades can be glanced only in forests of the Riviera, but the atrium, with an outdoor terrace and heated swimming pool at all times. Foyer is the actual beginning of the journey. The first ramp is rising just from my father. All the dark hallway, followed by a bright and translucent glass facades. The key is just a wall bordering the ramps and a few additional columns for the perimeter of the building. About half a meter above (and always rises only about 500 mm, the gradient of 1:16 to 8 meters length), the visitor gets to the first pool. Sunny southern facade is designed as a double, at this point is the greenhouse, it is no wonder that the first two pools are linked to breathing, inhalation, nature herbs. The hall (+7400) is glass mat glass sanitary unit consisting of two toilets, toilets for disabled people and installation bay. On one front wall of the shower. This element is repeated, the cabin is only 2.6 meters high (sv room is 3.65 meters), it was acting to hinder lightweight and transparent. On the left side counterclockwise overcomes next ramp stages. Pools are right to counter a výrivý. In this part of the facade facing the street catchment area, the intersection of fishing and of 8 m of pools have already seen the two interface Brno: Petrov and Špilberk. There is also a visitor gets to escape-connecting staircase. Possibility of shortening the path to the sauna is right here. The following pool of options in turn draws the double facade. Studenúuvodu make cold, shielded, north-facing environment. Hot pool at a height level of hygiene cab ...
|
|
|
Portable Belt Conveyor for Construction Materials and Waste
Ostrý, Josef ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The aim of this bachelor thesis is design of portable belt conveyor according to specified parameters. First part of the thesis contains the proposed concept with a choice of conveyor components. The next part of thesis deals with functional calculation, which is solved according to ČSN ISO 5040 and other specified sources. In the end of bachelor thesis is contained proposal of implemented tensioning device. Technical drawing of conveyor is also attached to the bachelor thesis.
|
|
|
Inclined belt conveyor of aggregates
Švásta, Petr ; Jonák, Martin (referee) ; Škopán, Miroslav (advisor)
The aim of this work is the proposal inclined conveyor belt for transporting the aggregate maximum grain size up to 150mm. Functionalcalculation is made according to ISO 5048 Belt conveyor supportingrollers. The report contains a brief description of the function, use anddesign of the conveyor and its affiliates. On the basis of specifieddimensions is processed transporter function calculation, a simplifieddesign and conveyor tensioning devices. The work is accompanied bydrawings stretching equipment and conveyor assemblies.
|
|
|
Shoulder milling of stainless steels
Holeček, Václav ; Kalivoda, Milan (referee) ; Humár, Anton (advisor)
The bachelor thesis talks about sholder milling of stainless steel. The first part deals with the general thesis including shoulder milling with the of division milling tools. Further stainless steel is described including its machinability. The main part is analyses mills for shoulder milling made by world´s producers, which are finally eva-luated from differen points of view.
|
|
|
Description of tool systems in machine tools
Popela, Martin ; Foller, Bronislav (referee) ; Blecha, Petr (advisor)
This bachelor thesis is specialized on characteristic and theoretical description of three principal parts of cutting machine with major effect for machining process – spindle, mandrel and cutting tool. These parts are characterized and described with schemes and examples. Explanation of components function and running.
|
|
|
Adaptation of the Watermill
Pavlík, Jan ; Hudec, Martin (referee) ; Klas, Roman (advisor)
The bachelor´s thesis is composed of two parts. In the first part, there is a generally discourse about small water power plants, their structural design, mechanical equipment and economical efficiency and its function is to create the basic conception of the waterwork. The second one deals concretely with the small water power plant in Crhov, that was rebuilt from the original mill by Mr. Petr König in 1990s.
|
|
|
Of the Veselý Family Mill and Dynasty (in Tábor) in the 17th and 18th century (a contribution to The History of Czech Miller?s Trade)
PEKAŘOVÁ, Martina
The thesis being presented deals with the oldest history of the Veselý family mill which is situated on the river Lužnice in Tábor. It supplements the previously published studies on the mill history with new and more thorough pieces of knowledge about the mill life and the human fates of its owners since the beginning of the mill?s existence till the end of the 18th century. The thesis is divided into five chapters, it has a constituent of the literary works and sources used register and appendices. The initial part of the thesis provides us with an overview of the literature which is dedicated to the topic of mills and milling industry; it analyzes either archival or physical material sources which is the source of the thesis investigation. The first chapter is focused on the history of mills located in the immediate proximity of the town Tábor. The second chapter is dedicated to the Tábor millers? gild; it also describes the activities of the mill owners, the Veselý family, within the gild. The third chapter processes the oldest history of the mill, the fourth chapter deals with the mill development in the 17th century. The crucial part of the thesis is the last chapter which brings the history of the mill since the year of 1660 closer, since when it had been owned by the Veselý dynasty, till the year of 1800. It describes the family life of the millers, their social status in the town of Tábor, extension of their property and also various disputes and heritage issues. The result of the analysis is summarized in the conclusion.
|
guest ::
