National Repository of Grey Literature 79 records found  beginprevious42 - 51nextend  jump to record: Search took 0.00 seconds. 
City within City
Mokrášová, Nina ; Dokoupilová Pazderková, Kateřina (referee) ; Nový, Vítězslav (advisor)
The planning area is situated north-east from the historical centre of the city of Brno in the district Brno-north. The main dominant of the site is a loosely built-up area of The Children's Hospital. The uniqueness of this place is also related to the city’s historical centre, the view of the Špilberk Castle as well as the possibility of recreation and comfortable living. It is important to link it up with the built-up structure of the city district while adapting the street to the requirements of today's city. Therefore, the aim of the work is to increase the attractiveness of the area and thus enable the inhabitants to enjoy a pleasant environment for living and a city life.
Residential house with commercial space
Pevný, Tomáš ; Pospíšil, Jaroslav (referee) ; Šuhajdová, Eva (advisor)
The subject of this thesis is to work out the project documentation for a residential building with commercial spaces in cadastral area of Trenčianske Stankovce, part Malé Stankovce. Residential building with commercial spaces is divided into two architecturally connected units. Residential building consists of one underground and three floors. Commercial spaces are designed as a fitness center with the underground floor. The floor plan of this complex is designed in the shape of a letter V. Construction system is longitudinal, wall made. Vertical supporting structures of the house are mainly made by the system POROTHERM. Other vertical and horizontal structures are made of reinforced concrete. In the commercial part of the project there are horizontal structures designed from prestressed ceiling panels SPIROLL. The roof of the residential building is designed as a single-shell flat roof. The roof above the commercial spaces is made as single-shell flat extensive vegetative roof. The drawing part is made with the AutoCAD software.
Residential building
Jakobei, Michal ; Vacenovská, Veronika (referee) ; Vajkay, František (advisor)
Hlavným cieľom tejto bakalárskej práce je vypracovanie projektovej dokumentácie k realizácii stavby pre rezidenčný bytový dom. Bytový dom sa nachádza vo Zvolene, parcely projektu spadajú pod katastrálne územie Zvolen. Miesto stavby má rovinatý profil, celý objekt je podpivničený, samostatne stojaci so štyrmi nadzemnými podlažiami a prístavbou s dvomi podlažiami na východnej strane pozemku. Z funkčného hľadiska ide o bytový dom prepojený s polyfunkčnou jednotkou. Koncept dispozície je pre 1, 2 a 3-izbové byty rovnaký. Navrhovaný objekt je na svoj charakter bez náročných tvarov, detailov a konštrukčných riešení. Navrhovaná stavebná činnosť preto vytvára predpoklad finančne výhodnej investície pri zachovaní stanoveného štandardu. Objekt je založený na železobetónovej základovej doske hrúbky 650mm. Všetky nosné konštrukcie v návrhu počítajú s použitím poloprefabrikovaných filigránových panelov. Hlavný strešný plášť nad posledným podlažím tvorí plochá strecha s mechanickým priťažením, hydroizolácia bude mechanicky kotvená do nosnej železobetónovej stropnej dosky. Obvodové steny budú zateplené systémovo riešeným kontaktným zatepľovacím systémom z izolačných dosiek z minerálnej vlny. Projektová dokumentácia bola vytvorená v počítačovom softvéri AutoCad.
Apartment house
Kušnir, Jakub ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of my bachelor´s thesis is to design and make out a design documentation to show the look of the brand new apartment house. The plot is located in the cadastral area of Brno-Židenice and the parcel number is 7652/22. The building is located on a flat terrain. The building consists of five above-ground floors. On the first floor are social space, berths and garages. On the second and the third floor are two dwelling units and on the fourth floor are located two separate duplex apartments which are extended up to the fifth floor. In the building is six residential units, that are designed for families with four or five members. The construction system is made of ceramic bricks and the ceiling is made of monolithic reinforced concrete. It is designed with a flat roof wich is drained by with roof gully.
Apartment building
Marcibányi, Slavomír ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The bachelor's thesis deals with design of a new apartment building with nearly zero energy comsuption in the city of Trnava. Apartment building have 4 above ground floors, in which there are 14 housing units, the building has a basement. Whole building is connected by an elevator and two-arm staircase. In 1.S there is wellness zone with sauna for inhabitants, technical premises, engine room for ventilation system, carriage house, common room, cellars and room for a cleaning lady. On 1.NP floor besides storage room for the gardener there are housing units. On 2.NP and 4.NP there are housing units. In front of the building there are 16 designed parking spaces, of which 2 are for immobile. Building is based on foundation strips. The supporting system is wall-mounted. The ceiling and roof construction are formed by monolithic reinforced concrete ceiling. The Building is covered by a flat single-skin vegetation roof. Thermal insulation is solved by peripheral ceramic blocks POROTHERM filled with mineral wool.
Solution of the technological stage of the rough superstructure of an apartment building in Třebíč
Bevelaqua, Patrik ; Venkrbec, Václav (referee) ; Brandtner, Michal (advisor)
The goal of my bachelor's thesis is to solve the technological stage of the rough superstructure of an apartment building located in Třebíč. The work contains a technical report for the rough superstructure stage, the construction traffic situation, the balance of workers, itemized budget and a time plan for the rough superstructure stage. Further, at work I deal with safety at work and quality requirements for construction. The work also includes the design and assessment of the lifting equipment.
Design of Reinforced Concrete Structure of Residential Building
Bodor, Andrej ; Strnad, Jiří (referee) ; Požár, Michal (advisor)
The bachelor thesis is focused on the design and assessment of the reinforced concrete floor structure and selected load-bearing structural elements of the apartment building. The design and calculation of internal forces was developed using SCIA Engineer 21.1 and subsequently compared with the manual calculation. Selected structural elements were designed and assessed for sound insulation and thermal bridge breaks. The design of the structures followed the applicable European standards EN 1992-1-1 and EN 73 1201. The final output is the elaborated drawing documentation.
Block of flats
Hanuláková, Mária ; Hrabovský, Kristián (referee) ; Benešová, Romana (advisor)
The goal of my bachelor´s thesis was to process the project documentation of the Rajhrad building,which is determined for living. Building is in Rajhrad city, in cadastral area of the city. Building is constructed as permanent build for living with 8 residental units located on 4 floors. The entire building has a basement on a slightly sloping terrain, while in the basement are store spaces designed for each apartment. 1st and 2nd are identical and they has 2+kk apartments and studio. At the 3rd floor is studio too, but there are 2 maisonette apartment, which continues to the 4th floor. A monolitic reinforced concrete stairs and personal elevator are conecting this floors. The entrance is on north side of the building. The building has wheelchair-accessible ramp. As a part of the project is parking lot for 18 cars, 2 of them are for limited mobility people. The construct system is a longitudinal wall, while basement walls are reinforced concrete and walls of the floors are made of porotherm ceramics bricks whith a thickness of 300mm, Inside load-bearing walls are porotherm 300mm thick, partitions are 140mm thick. Ceilings are made of ceramic beams and miako inserts. The staircase is a monolithic reinforced concrete double-arm. The structural height is 3.25m and the clear height is 2.9m. The entire building is insulated with the ETICS contact insulation system and covered with an impassable flat roof.
Apartment building with student dormitories on Freedom square in Brno
Válková, Klára ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor)
The bachelor's thesis is based on an architectural study developed within the subject Architectural Design Studio [AG034]. The subject of the design is the new construction of an apartment building complex together with dormitories for students on the territory of the Lerchova compound, which is located on a sloping plot of land in the Freedom square in Brno. The design consists of two blocks, block A and block B. Block A has five floors above ground and is divided into a part where there are dormitories used for short-term accommodation and a part of housing units. On the ground floor there are spaces for rent with the possibility of commercial use. Block B, used only for short-term accommodation of students in dormitory cells, has four above-ground floors. On the ground floor of block B, there are common rooms for students, such as the library and study room. Both blocks are connected by the first underground floor. In total, block A provides accommodation in 20 flats with an area of 2+kk , studios 2+kk, 3+kk and 4+kk and accommodation for 112 students. Block B has accommodation for 72 students. From the point of view of materials, block A has the shape of an irregular letter U, the longer side of which copies Lerchova Street; the shorter side allows residents a view of Kraví hora and the surroundings of the Masaryk district. Two corners are taken from the total volume of matter, from the second above-ground floor to the fifth, towards Kraví hora. These removed masses serve as balconies. Block B has a rectangular shape. Two parts are taken from the total mass of the building, which serve as common balconies of the cells. Both blocks are covered with a green roof. The color of the facade of both blocks respects the colors of the surroundings of Freedom square. The facade of block A is complemented by aluminum slats with wood imitation in the module, which is located in the layout of the revitalized square. The proposal discusses the construction of a complex of two buildings, as well as the connection to the adjacent area of Freedom square. As part of the project documentation, block A is addressed.
Heterogenous block
Hajdák, Adam ; Stibitz, Jan (referee) ; Hora, Jan (advisor)
Nowadays, the residential crisis huge issue not only in Czech republic but also in Slovakia. There is a constant increasing in the housing demand in last vears, however the housing supply stays limited. The reason of the lack of of dwelling units is low building of new ones and also rising price of real estates. The aim of this thesis is to provide some form of available housing for socially disadvantaged groups. Desisned dwelling units will help to expand the number of flats in housing fond of the city of Louny. My intention is to create the architecture which blends and doesnt stand out of the concept of the area. Built-up area that is being created defines the space which is drowned into the greenery, a kind of a garden. This area has a potential for a formation of a pleasant enviroment which is also acoustically and visually calm. It creates feelings of different atmosphere in its, citizens. This enviroment will provide housing semipublic areas, places for relax and meeting and shared gardens which will connect with the suounding landscape.

National Repository of Grey Literature : 79 records found   beginprevious42 - 51nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.