|
|
Vliv tepelného zpracování na mechanické vlastnosti oceli
Čupa, Jan
Bachelor thesis deals with the heat treatment of steel and its influence on the mechanical properties of steel. In the introduction is the procedure to production of raw iron and steel. Thesis shows the distribution of steel, depending on their chemical composition, method of production and labeling according to Czech National Standards. Thesis also describes structural phases and some transformations of iron alloys. The next chapter provides an overview of the heat treatment methods and part of the description of each species is usually their influence on the properties of steel. The final part of thesis deals with the lattice defects, that may arise during the process.
|
|
|
LED failures
Doležal, Petr ; Krbal, Michal (referee) ; Pavelka, Tomáš (advisor)
This bachelor thesis is dealing with description of the principle generation light in the LED light sources. In the text we can find principle function of LED, history, possibilities of brightness control, power supply and various types of structures. There are described photometric and electrical parameters. Other part of this thesis is the description of effects leading to failure and malfunction of LED light sources. The practical part of this thesis contains measuring on samples of power LED emitting white light and verification of operational effect leading to the failure of LED light sources.
|
|
|
Rotor fault diagnosis of induction motors
Bednařík, Václav ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This bachelor thesis focus on the faults of induction motors. In general terms to mechanical and electirc faults and their influence on induction motor. Further on the tests, that are conducted on induction motors to detect faults and states that precede them. Main part is devoted to rotor eccentricity and broken rotor bars. Eccentricity is solved within theoretical analysis and measurements on free damaged motors. As well as broken rotor bars, which are supplemented by measurements on three damaged rotors. There are two types of eccentricity, static and dynamic. Faults of broken rotor bars is solved in terms of postion of broken rotor bars and their number.
|
|
| |
|
|
Long Term Condition Monitoring in Order to Assessment of Existing Masonry Arch Railway Bridges
Kůrka, Jan ; Dohnálek, Jiří (referee) ; Tomek, Jan (referee) ; Hobst, Leonard (advisor)
Thesis rises from an actual needs to make standard of practice for assessment an existing arch railway masonry bridges on the basis of condition long term monitoring. Bridge assessment is a part of any inspection, especially in case of doubts arising during inspections due to heavy defects, increase of axle load or increase of train frequency, which may influence the structural safety, traffic safety or durability of a bridge. There are possibilities for utilization of monitoring results for assessment in case of investigation data absece. An important option is assessment based on satisfactory past performance by ČSN ISO 13822, chapter 8.
|
|
|
Reduction in House Prices due to Humidity
Ocásek, Petr ; Šmahel, Milan (referee) ; Weigel, Lubomír (advisor)
Diploma work "Problems of house price reduction due to defects manifested with damp" deals with the issue of property valuation and subsequent sale of the defect. The first chapter describes valuation and other important factors relating to the Act valuation. The second chapter deals with the necessary documentation for property valuation and basic terminology. The third section deals with defects that could occur in the residential building as well as their possible correction. Another part of this work is focused on the actual valuation of the object to a defect with property damage and the last chapter deals with the actual real estate market and the subsequent sale of such property with the defect. The attachments of the case study is then focused on the valuation of the house and without defects and possible solutions and proposed procedures for sale.
|
|
|
Diagnostics of Reinforced Concrete Bridge
Rozbroj, Lukáš ; Anton, Ondřej (referee) ; Cikrle, Petr (advisor)
This thesis contains diagnostics of a reinforced concrete girder bridge in the municipality of Újezd u Brna. The aim is to conduct an inspection of the bridge, gather quality photo-documentation of defects and failures and design and conduct a diagnostic examination of such extent that would be necessary for judging the load bearing capacity of the bridge. The result of this thesis is the determined load bearing capacity and a proposal of measures required to keep the bridge functional.
|
|
| |
|
|
Device for diagnostic of induction machine
Buln, Tom ; Janda, Marcel (referee) ; Huzlk, Rostislav (advisor)
The aim of the thesis is to study the problems of induction motors, which belong among the most widespread and used machines. Due to their expansion, it is advisable to start the fault monitoring to prevent any more damage and losses. It can be used for condition monitoring different types of methods, which are variety technically and costly demanding to implement. It is used the method of measurement using stator currents in this thesis, because these currents are already monitored and it is easy to create devices for a more detailed analysis. The whole monitoring is carried out using products from National Instruments. The program of monitoring is created in graphical setting of LabVIEW. The analysis is conducted by calculating the Fast Fourier transform of the time signal. The result is the frequency spectrum, which contains frequency peaks and some of these peaks represent failure. The test data are collected with a DAQ device and then the same data are used for creating a methodology for evaluating online analysis and it is subsequently implemented into CompactRIO.
|
|
|
Characteristic Piston Ring Failures and Their Corrective Methods
Orság, Josef ; Knotek, Jiří (referee) ; Raffai, Peter (advisor)
This Bachelor's thesis concerns the most common failures of piston rings. The first part of this thesis focuses on the design of a piston ring and on the load affecting it. The second part describes various kinds of lubrication. This section also shows, which lubrication states occur during operation of internal combustion engines. And final part is devoted to the most common failures of the piston rings and how to prevent them.
|
guest ::
