|
|
Analysis of traditional timber structures
Šigutová, Petra ; Vlk,, Zbyněk (referee) ; Zídek, Rostislav (advisor)
The subject of my bachelor´s thesis is the research of the statistical effect of a barn´s rafter. The preface is devoted to the creating two - dimensional models of the basic types of the rafters and their behavior during the loading. The main part of my thesis deals with the composing three-dimensional models of the roof. I try to depict the behavior of the structure after the deformation of the joints. I compare the results to the real behavior of the structure.
|
|
|
Steel structure of an industrial building
Kopecký, Ladislav ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
Industrial hall with storage outbuilding. The length of the hall is 72 meters and width of 30 meters. The main hall has a span 24 meters and the outbuilding has a span 6m. The distance between primary steel frame is 6 meters. The height of the main hall is 10.7 meters and a height of outbuilding is 13.0 metres. The roof is flat with roof slope of 3.5% the main hall and 8.75% outbuilding. The structural system of the hall's bar structure. Primary steel frame is designed as a steel frame rafter with eaves haunch. In the roof structure are designed purlins. The stability of the structure is secured by roof braces and longitudinal braces. The hall is pin-supported on the foundation pad. The hall is clad wall and roof panels PUR. Main hall is equipped with a bridge crane with capacity of 8 tons.
|
|
|
The reconstruction design of timber structures of the existing building
Bartlová, Jana ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The content of this work was to carry out construction-technical survey of timber structures of the existing building in order to design an appropriate procedure for their reconstruction. The survey showed construction in an unsatisfactory to disrepair, so further work also includes the static calculation of new structures proposed instead of the current. Timber structure in the building has form of staircase, roof and ceiling construction. Newly designed the following types of stairs and roof trusses from which the lower belts are used as ceiling beams. The new proposal also includes possible roofing, roofing options, developed one of them. The work also includes drawings, bill of materials and cost estimate staircase structure and truss. Specialization in the field of civil engineering is represented by drawings of the new truss and passport (view of current state) whole object on parcel ST.74 / 1, land Tišnov (okr.Brno-venkov), the content of which was the basis for this work.
|
|
|
Multipurpose hall in Holice
Rückerová, Eva ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.
|
|
|
Mountain hotel in Beskydy
Kubášková, Barbora ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
This thesis solves design of timber structure of mountain hotel in Beskydy. The hotel is two-storey building with residential attic and no cellar. The ground plan of the building is about 15x26 m and height of the building is 14,76 m. The type of roof timbers was chosen from two options. There was used structural timber of the strength class C24, glued laminated timber of the strength class GL24 and steel S235. Program Scia Engineer was used for the static analysis of the structure. There was made only linear calculation.
|
|
|
Sport hall in Jihlava
Milich, Marek ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The aim of this master´s thesis is design and statically examine a bearing structure of ice hockey stadium in Jihlava with axial ground area measuring 43x85 m. Design od structure was prepared in three variants. The core bearing structure composed of three-joint arched roof beam create timber and steel lower beam, or solid wood of glulam timber. The third variant was work out in detail. Scia Engineer 2013 software has been used to create a three-dimensional model for the purpose of dimensioning each member and global analysis. Results obtained from the computer analysis were taken and double-chcecked with a hand assessment of the structure elements.
|
|
|
Architectural and technological preparation of a residential building in the Great Mezirici
Invald, Roman ; Diaz, Yvetta (referee) ; Vlčková, Jitka Laura (advisor)
The thesis concerns the construction of an apartment building in Velke Mezirici. The project describes construction and engineering solutions of the building itself. It consists of the technical report, the financial proposal, the construction site drawings, the building schedule, the supervisory and testing procedures, technological standards (thermal insulation and roof assembly), construction machinery, BOZP, fire safety regulations and construction maintenance.
|
|
|
Timber load bearing structure of a family house
Perhalová, Anna ; Buchta, Stanislav (referee) ; Straka, Bohumil (advisor)
The subject of this bachelor's thesis is design and static assessment of timber load bearing structure of the family house. The object is located in Slavkov u Brna. Design of truss structure is based on architectural study by prof. Ing. arch. Ivan Ruller. The ground plan dimensions of load bearing structure are 11,63x15,00 meters and the height of the roof ridge is 6,56 meters. The structure of the roof is made as a rafter system, which is supported on the lattice truss, on the main beam and wall rafters. Horizontal forces are transferred into the wall panels by means of tight members, which are anchored to wall rafters.
|
|
|
The Roofing of The Ecclesiastical Building
Lecián, Martin ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Bachelor's thesis deals with wooden loadbearing structure the roofing of the ecclesiastical building with dimensions 15,5 x 17,5 meters in the village Chudcice northwest of Brno. The building is 16 meters high and the roof is 12 meters high. The main loadbearing roofing structure consists of corner rafters reinforced wood frame, here is placed joist floor of loft. The main beams are designed from glued laminated wood GL24, other supporting beams are designed from wood C22. The roof of the chapel is formed by intersection of two pyramidal roof and it is at an angle of 62°. Roof cladding is made of asphalt shingle. Bell stool with a bell is in the top of the roof. Technical equipment ensuring automatic chime is located in the loft. Connections of wooden beams are designed with steel joints.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
guest ::
