|
| |
|
|
Automated tuning of drive controller
Adamec, Matúš ; Pohl, Lukáš (referee) ; Blaha, Petr (advisor)
This thesis deals with automated tuning of drive controller. To achieve this goal, system identification is needed. Therefore, the issue of identification is described at the beginning of this thesis. Spectral analysis was selected from many described methods. It was implemented in Matlab and also in C# language where was used averaging and Blackman-Tukey method. The C# application is linked to Beckhoff TwinCAT 3 and TwinCAT 2 runtime sytems that enable connections with real drive. Next, the problem of drive regulation is discussed and the results of using spectral analysis on real drives are shown. At the end of the thesis is described the algorithm of setting the speed controller with different types of frequency converters.
|
|
|
Control of the laboratory model of synchronous drives
Koubík, Martin ; Bílek, Michal (referee) ; Zezulka, František (advisor)
The aim of this theses describes the design of the control program for the synchronous axes model and reconstruction of this model. The first main part is description of synchronous axes model, description of engines and other components of model. Then model modifications are described. Another part is discussing the TwinCAT programming environment and describe all important elements that must be performed for proper functionality of the model. There is also a description of function blocks that are used to program motion sequences. The last part is described of demonstration program and program which would be used for teaching.
|
|
|
PLC simulation using TwinCat tool
Krátký, Martin ; Uher, Václav (referee) ; Mašek, Jan (advisor)
Bachelor project is about options in TwinCat 2 for programming the programmable logic controller (PLC). As part of the work will be described the principle of the PLC and PLC uses nowadays. The principe of developing tool TwinCAT will be described and an overview of the programming languages that standard IEC / EN 61131-3. The main contribution of this work is to create a program description in TwinCAT development tool in version 2. The main result will be a simulation of robotic arm created in TwinCAT version 3 and for this simulation will also be created graphical interface in Visual Studio in language C#.
|
|
|
Design of control of axis with linear motor
Chaloupka, Roman ; Bradáč, František (referee) ; Vetiška, Jan (advisor)
This thesis deals with construction, connection and control axis with linear motor. The beginning of thesis is focused on principle of functioning and characteristics of linear motors. The following part describes used components of axis, their mechanical configuration and electrical wiring. Further thesis deals with creating PLC program and user interface for control axis in TwinCAT system. In last part is dealing correct software settings of axis.
|
|
|
3D engraving milling machine
Bosák, Daniel ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of a laboratory manipulator to 3D engraving machine. First part of the thesis describes the engraving technology and lists the most common types of engraving machines. Next, the initial state of the machine is analysed and modifications of mechanical and electrical equipment are suggested. Design, realisation of a control system and human machine interface are described. The Beckhoff TwinCAT programming environment is used. The last part of the thesis deals with practical realisation and commissioning of the machine. The results of the thesis can be used as an addition for lessons of Automation of Production Machines.
|
|
|
Design of a SW library for drives control
Špaček, Marek ; Jiří,, Holík (referee) ; Zezulka, František (advisor)
The main aim of this thesis is to create a library in TwinCAT PLC for Beckhoff motion control without NC task. This library is targeted for less performance controllers. The next part deals with creating a PLC application for motion control with digital I/O variables or with serial line. A Windows application will be created to configure the main parameters of motion control in the PLC Application.
|
|
|
Use of the software PLC in thermal engineering of buildings
Hubený, František ; Kaczmarczyk, Václav (referee) ; Pásek, Jan (advisor)
This presenting master’s thesis deals with a problem of digitaly controled room temperature using the software PLC. The result of this work was creating of an algorithm to control temperature on the requested leve ofl setpoint, minimizing operating costs of the building. The PLC softwares from different manufacturers were analyzed and compared with conventional PLC. The testing facility was disigned and used to control the temperature in the room and data visualization. Room temperature was regulated by PS controller or two point regulator.
|
|
|
Modification of 3D milling machine to 3D printer
Halamíček, Lukáš ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of engraving machine to 3D printer. In the first part it describes possible 3D printing technologies and its utilizations in rebuilding. In the next section suitable parts for reconstruction are chosen and described. Then the controlling of heating bed, hot end and filament feed is realized by using software TwinCAT by company Beckhoff. Functional 3D printer should be result of this thesis.
|
|
|
Industrial TwinCAT based diagnostics application
Zigo, Ľubomír ; Ondroušek, Vít (referee) ; Krejsa, Jiří (advisor)
This bachelor´s thesis describes designing of diagnostics application for press controlled by Beckhoff TwinCAT. Application monitors press regularly and informs staff in case of breakdown. Diagnostics application is created in high-level programming language Visual C++ in Microsoft Visual Studio environment. Application communicates with TwinCAT via .NET Framework library TwinCAT::Ads, which is part of TwinCAT. Breakdown texts are read from database via Microsoft OLE DB interface using SQL.
|
guest ::
