|
|
Application of modern methods for production of mobile phone storage stand
Tesař, Jaroslav ; Nejedlý, Jindřich (referee) ; Sedlák, Josef (advisor)
The thesis was made as a bachelor’s project on Faculty of Mechanical Engineering, Brno University of Technology. In the theoretical part methods of Reverse Engineering were described. The principle of the following technology, the Rapid Prototyping, was also explained and the summary of advantages and disadvantages and use in technical practice for the most important methods was made. In the experimental part of the thesis the modern methods were applied for manufacturing a cell phone holder. By this the possibility of these technologies to work with complexly shaped models was verified. The casting to a silicon form was used as the alternative method of manufacturing. The summary of possibilities of manufacturing with these technologies and technical and economical evaluation were made in the end of the thesis.
|
|
|
Digitizing of human tissues
Matejková, Monika ; Koutný, Daniel (referee) ; Paloušek, David (advisor)
The goal of this bachelor thesis is to build up a compact overwiew of recent development in medical visual methods, which allow making three-dimensional geometric datas and overwiew of scanning methods outside geometry surface of human body with next digitalizing. There are describing principles of each ones visual methods, their possible advantages, disadvantages, which outputing forms we receive. In next part of this thesis there are describing possibilities of processing acquired datas for making 3D geometry models. Work is completing with appreciation of obtained knowledges and definition of trends future development.
|
|
| |
|
|
Parts inspections by using reverse engineering methods.
Urbánek, Aleš ; Sedlák, Josef (referee) ; Zouhar, Jan (advisor)
This bachelor work deals with parts inspections by using reverse engineering methods. In first parts is adduced distribution and description devices used for reversing engineering. In next parts of work is characteristic of conventional measuring methods. The parts of this work is practical utilization of ATOS system to verification given part. Purpose of work is comparing conventional measuring methods with reverse engineering methods.
|
|
|
A framework for paperless office implementation in manufacturing companies
Hanusová, Zuzana ; Oškrdal, Václav (advisor) ; Bahník, Václav (referee)
This master´s thesis discusses the introduction of a paperless office in manufacturing companies. The main goal of our work is to create a general framework for implementing paperless offices in such enterprises. The theoretical part presents the needs of today´s information society, focusing on the requirements of manufacturing companies. Next, the thesis describes the closely related topics such as company documentation and document archivation. The key chapter of the theoretical part deals with the subject of paperless office itself by discussing the current knowledge about different approaches, digitization, benefits, risks and suitable tools of information systems. The outcome of our work - and its main contribution - is the newly proposed general framework, which may serve as a guide for implementing paperless office solutions in the manufacturing companies. The practical part of the thesis demonstrates an application of the suggested framework to propose a solution for the company called Mi-King s.r.o.
|
|
|
DIGITAL IMAGES PROCESSING IN RADIOGRAPHY
PILAŘ, Martin
This thesis is focused primarily on digital image processing and modern imaging modalities algorithms. An algorithm means a method for solving a problem or an instruction. In image processing an algorithm presents the process from data acquisition to the resulting image displayed on the monitor. Therefore, in the first part of the thesis a brief overview of principles of imaging modalities used in radiodiagnostics is given. Collected data have to be analyzed and modelled in a certain way. These modified data are then digitized and ready for further processing. The main objective of my paper was to explain, especially to radiology assistants, the basic operations and algorithms used in image processing that are commonly used. I also tried to prove that not only by changing scanning parameters, but also by changing any image parameters the test results may be affected. On the other hand the operating personnel may invalidate the examination and thus contribute to an imperfect diagnosis. Other sections of my thesis are focused on primary image processing and basic image operations. This information is followed by post-processing or secondary processing of visual information. An integral part of the image processing algorithm consists of hardware and software important for archiving and information transmission. A certain part of my paper is devoted to future trends in image processing. The whole theoretical part is based on practical experience and the results obtained by either creating a software algorithm or by measurement of a water phantom on CT, where the original hypothesis was defended by applying a filter. The results are supported by a graphic and image documentation.
|
|
|
Elaboration and interpretation of map materials in GIS for the Ostrice stream catchment.
HOUDEK, Jiří
The aim of the thesis was the creation and interpretation of thematic layers for the Ostřice stream catchment. First step was collecting all the available maps and comparing them with the actual state. The documents were digitized, and the thematic layers were created. The map outputs were created from these layers and their combinations and were analyzed. The output of this work is a set of GIS layers for the Ostřice stream catchment. This work was processed with the ArcGIS Desktop 9.1 software.
|
|
|
Elaboration and interpretation of map materials in GIS for the Zdikovsky stream catchment.
ADÁMEK, Petr
The aim of this thesis is to create various thematic layers for the Zdíkovský stream catchment. The first step was to collect maps and compare them with the actual state, followed by the digitizing of these documents and the creation of thematic layers. Map outputs were created from the individual layers and their combinations and were analyzed. The result is a set of GIS layers for the catchment. ArcGIS Desktop 9.1 program developed by ESRI was used in this work. Elaborated set of layers will be further used for research and educational purposes by the Department of Land Adjustment.
|
|
|
Usage of cadastre of lands maps for land adjustment production.
DOLEŽALOVÁ, Zuzana
The intention of my thesis is to analyze the volume and the method of application ancient maps by land consolidation, especially land maps. Special attention was paid to document preparation and transformation of grids. The result is, that the ancient maps are used most by renewal of field paths, hydro engineering works, shape of parcels optimization and solution of property ratio.
|
|
|
The Role of Multimedia in Educational Support Systems
Řezníček, Jan ; Šedivá, Zuzana (advisor) ; Pavlíček, Luboš (referee)
The aim of the diploma thesis "The Role of Multimedia in Educational Support Systems" is to analyze the current role of multimedia in information systems and to explore the existent use of multimedia in the educational process at VŠE. By doing so, the reader will be presented with a comprehensive roundup of the current technological tendencies concerning multimedia and their use in the educational environment. Among the topics analyzed within the scope of the technological foundations establishing chapters are the current role of multimedia, data types, transmission channels and the digitizing process. In the subsequent section, multimedia is being perceived as a concrete tool supporting the educational process. Based on the research conducted at VŠE that analyzed the technological, financial and personnel conditions, a concept of multimedia learning model was proposed in the eighth and final chapter. The current state analysis and the proposed multimedia education model at VŠE constitute the author's principal contribution to the educational field and at the same time a starting point for a future melioration of multimedia education deployment at VŠE.
|
guest ::
