|
|
Contact between end coils of cylindrical helical compression springs
Nekoksa, Pavel ; Grulich, Tomáš (referee) ; Kašpárek, Jaroslav (advisor)
This diploma thesis deals with hot-formed helical compression springs. The first part of the thesis describes related problems and determines market potential. Following theoretical part describes the influence of contact line on behaviour of springs and compares it with normative regulations. Methods suitable for determination of helix shape are covered in the next part. The last part focuses on practical measurement, in which the change of helix shape during manufacture was observed. The main output of this diplomat thesis is suggestion of measures that should contribute to both optimization of manufacture and verification of FEM model.
|
|
|
Single-Phase Induction Motor
Vácha, Pavel ; Lapčík, Josef (referee) ; Hájek, Vítězslav (advisor)
The bachelor work is concerned the thesis of a single-phase induction motor that´s perpetually more used in all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. The practical part contains a basic schema calculation of the single-phase induction motor with an auxiliary phase and a processing demonstrate example of calculation of the single-phase induction motor with concrete parameters along suggested process. In the conclusion there is the evaluation of the whole process.
|
|
|
3-D Coils and Transformers
Florián, Petr ; Háze, Jiří (referee) ; Šandera, Josef (advisor)
Construed work deal with present situation in resolving 3D coils and planar transformers with windings realized on printed circuit. Main objective is to find a correct technological process of manufacturing printed circuits and methods of their 3D joining. The output of work is calculation and proposal winding of planar transformer and selection right method for realization. Point of the work is trying to create a suggested transformer.
|
|
| |
|
|
Magnetic field analysis of synchronous machine
Volf, Tomáš ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
The Magnetic Field Analysis Project of Synchronous Machine deals with program for magnetic field analysis of synchronous machine cross section. This program is written in detail along with the necessary theory of synchronous machine and the ANSYS program. After this the program for using different types of sectional wires modification is made – in the concrete for round conductors. It is attained the numeric computing method – The Finite Element Method. To creation of the magnetic field simulation serves ANSYS program, which uses The Finite Element Method.
|
|
| |
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Improvement Power Parameter of Small Induction Motors
Kuda, Roman ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
This master´s thesis treats of all asynchronous motor. The project is about type and distribution motors, about differences between three-phase and single-phase machines and efficiency. In one of the chapters describes a particular type of engine with all the parametersfrom the manufacturer. This engine is completely analyzed and it is measured in detail. Then the project deals with the division, the calculation of losses and subsequent possibilities to increase the efficiency of induction motor. In the last chapter is calculation of single-phase motors, based on the engine produced.
|
|
|
Analysis of the stator and rotor pack termination effect on the synchronous machine by FEM
Michailidis, Petr ; Valenta, Jiří (referee) ; Skalka, Miroslav (advisor)
This thesis deals with simulation’s possibilities of the electromagnetic fields in electrical machines. A finite element method is the final element technique. The content of this thesis is a model and mesh creation and electromagnetic simulation of synchronous machine. The stator and rotor pack termination effect on the synchronous machine.is analyzed by finite element method in ANSYS program. The type of the stator termination pack is described by four segments. The magnetic field distribution is deformed due to the material properties of used segments. In the next part a methodics of mesh creation is shown. The mesh quality (in term of elements number and elements shape) is important due to the solution accuracy and speed.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
guest ::
