|
|
Suppression of power-line interference in ECG signals
Gregorová, Kateřina ; Vítek, Martin (referee) ; Kozumplík, Jiří (advisor)
This work includes an overview of the different methods of filtering of ECG signals that suppress the network interference. It focuses on the parameters that affect the quality of filtration for the three main groups of filters: FIR, IIR and adaptive filters. The main objective is to evaluate proposed methods in terms of the quality of filtration. This quality is rated an average output SNR, standard deviation and time filtering. The criteria of success is based on the filtration of the basic requirements on digital filters. Design of filter is realized in the Matlab programming environment.
|
|
|
Preprocessing of 1D gel electrophoresis image
Svozilová, Veronika ; Škutková, Helena (referee) ; Vítek, Martin (advisor)
The aim of this work is to propose an algorithm in MATLAB, allowing image processing and evaluation of one-dimensional gel electrophoresis. At first describes the detection of samples based on the horizontal segmentation of electrophoresis gel image, followed by detection of the minimum intensity values of the image, a vertical segmentation and determination of the sample boundaries in the image. The final phase involves testing of the method on publicly available images and evaluation of the results.
|
|
|
Cavitation assessment from flow rate drop and high-frequency pressure pulsations.
Šebek, Miloš ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
|
|
|
Redeployment and verification spindles water supply river armours
Jelínek, Norbert ; Musil, Martin (referee) ; Pernikář, Jiří (advisor)
Solving problems of production and calibration spindles water supply river armours by the help of method SPC. Analysis capability of gauge by the help of methodists MSA-Cg,Cgk. Evaluation capability of machanical abnd digital outside micrometer. Verification limiting deviation of micrometrical screw in among - calibration interval. Attestation capability of machine and of the process. Construction of regulation diagram. Project of new control instruments. Technically-economic evaluation:savings 110 560,00Kč, profitability 764,85%, economic return 0,13 year. Successful application of methodists SPC attested by document about adjustability of the process.
|
|
|
Optimalization of the die cast process of high-voltage transformers.
Borunský, Tomáš ; Fiala, Alois (referee) ; Maroš, Bohumil (advisor)
This thesis deals with choises of using mathematical statistics when optimising the compression casting process of high-voltage device transformer. There is a theoretical consideration to be found in the introduction which concerns the compression casting itself and all necessary information connected with it. Then there is a key numerical analysis part following. In the first instance there are variability problems of individual casting device discussed and then a regression analysis made to demonstrate and prove a link between the partial discharge and the key parameters of casting process. Finally an “optimal” casting sequence is suggested and alternative attitude problems with the assistance of Design of Experiments (DOE) are discussed.
|
|
|
Deformation Surveying of Crane Track
Molčan, Vladimír ; Bureš, Jiří (referee) ; Vitula, Alexej (advisor)
The main theme of this master thesis is the design of technological process measurement and processing of measured data entered crane tracks to determine the geometric parameters of these crane tracks. Diploma thesis further describes the procedure for testing and possible rectification surveying equipment and instrumentation. The thesis is divided of 7 parts, contains 31 images, 4 graphs, 44 tables and 13 attachments. The theoretical part of this thesis contains information about several types of cranes, methods of measurement and processing, as well information on legal and technical regulations related to this topic of the thesis. The fourth and fifth parts of this thesis provides information on selected crane tracks on which the measurements were taken, the choice of methods of measurement, processing technique and the results obtained. The final part of the thesis includes evaluation of the results obtained, comparing methods of measurement, processing, evaluation and design of a technique of determining the geometric parameters of crane tracks.
|
|
|
Performance comparison of methods for design of experiments for analysis of tasks involving random variables
Martinásková, Magdalena ; Novák, Drahomír (referee) ; Vořechovský, Miroslav (advisor)
The thesis presents methods and criteria for creation and optimization of design of computer experiments. Using the core of a program Freet the optimized designs were created by combination of these methods and criteria. Then, the suitability of the designs for statistical analysis of the tasks vith input random variables was assessed by comparison of the obtained results of six selected functions and the exact (analytically obtained) solutions. Basic theory, definitions of the evaluated functions, description of the setting of optimization and the discussion of the obtained results, including recommendations related to identified weaknesses of certain designs, are presented. The thesis also contains a description of an application that was created to display the results.
|
|
|
The Use of Means of Artificial Intelligence for the Decision Making Support on Stock Market
Vaško, Jan ; Kříž, Jiří (referee) ; Dostál, Petr (advisor)
Diploma thesis deals with analyzing the possibility of using artificial intelligence, specifically artificial neural networks and fuzzy logic, on the capital markets as a tool to support decision making in business. The Matlab software is used for this purpose. The work is divided into three parts. The first part deals with theoretical knowledge, brief description of the current situationin is covered in a second part and the theoretical solutions are applied to the system in the third section.
|
|
|
Securities portfolio optimization
Pinkava, Ondřej ; Bartošek, Vladimír (referee) ; Sojka, Zdeněk (advisor)
This dissertation deals with the securities portfolio optimization. After introducing the definitions, I try to explain the particular investment instruments with regard to returns and risks. The following part provides a theory which tells more about different market risks and returns on the final securities portfolio. Concerning these models the effective portfolio has been set up.
|
|
|
Voltage References in Bipolar and CMOS Process
Kotrč, Václav ; Prokop, Roman (referee) ; Kadaňka, Petr (advisor)
This diploma thesis deals with precise design of Brokaw BandGap voltage reference comparing with MOS references. There is STEP BY STEP separation and analysis of proposed devices, using Monte Carlo analysis. There are also presented the methods for achieving a lower deviation of the output voltage for yielding device, which needs no trimming.
|
guest ::
