|
Reconstruction of a cinema building
Uhrinec, Marek ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis is focused on a reconstruction of a cinema building in the town Gbely. It’s complete reconstruction of exterior and interior too. Original function, cinema, is change to sport and cultural centrum now. Object is consist of cafe, squash hall, climbing wall and sauna with rest room. Several thermal insulations are used to isolate object and satisfy a norm terms. The foundations are post insulated too. The interior is divided into functional spaces with Heluz system. New finishes in the object is created by brick paving, klinker, ceramic tiles and tiling. All windows and doors are replaced by new ones in the object. Sliding doors are used in interior for save space. The windows and doors are plastic between interior and exterior. All sanitations are replaced by new ones too. The reinforced concrete floor is used instead of lead bearing lintels. The wheelchair conditions are satisfied on ground floor.
|
| |
|
Physical therapy procedures in patients following the operation of the anterior cruciate ligament
Pešlová, Kateřina ; Jalovcová, Miroslava (advisor) ; Satrapová, Lenka (referee)
Title: Physical therapy procedures in patients following the operation of the anterior cruciate ligament Objectives: The main objective of this work is to determine the influence of the chosen method of reconstruction and subsequent physiotherapy on the final status of the patient. And also if the group physiotherapy is the ideal therapeutic approach. Methods: In quantitative research the numerical analysis of the data was performed. Comparison of individual groups was performed simply through finding the frequency distribution of individual characters. Evaluated were the basic sets A (patients operated on by Bone - Tendon - Bone method, BTB) and B (patients operated on by hamstring graft method, STG). Both sets were assessed using the input and the output kinesiological analysis. The resulting values of the variables in each category (individual examinations in the input and output kinesiological analysis) were compared with each other.The statistical significance of observed differences was tested using the x2 (chi square) test at the significance level of p < 0.05. Results: It was determined that the selected surgical method (BTB and STG) has an effect on certain parameters evaluated in the input rated kinesiological analysis. These parameters in the majority of examinations performed at the...
|
|
Kazuistika fyzioterapeutické péče o pacienta s plastikou předního zkříženého vazu
Tsaparegas, Ilias Antonios ; Jalovcová, Miroslava (advisor) ; Kozderková, Romana (referee)
Title: Rehabilitation after Anterior Cruciate Ligament (ACL) Reconstruction Nazev: Kazuistika fyzioterapeuticke pece o pacienta s plastikou predniho zkrizeneho Author: Ilias Tsaparegas Aim: In this thesis, a therapeutic approach of ACL Reconstruction due to tendon rapture will be described and a complete therapeutic record of a patient after ACL Reconstruction is demonstrated. Methods: The rehabilitation included 6 days of therapy. The main points of the state of the patient were light pain while walking, muscle weakness and incoordination, joint play restrictions and restriction of ROM of joints on the lower extremities. The first and last sessions with the patient included the Kinesiologic evaluation. Therapy and the methods which were used included joint play, strengthening exercises without and with the use of tools (like over-ball, Theraband, various balance boards, Posturomed platform, stationary bicycle, Stairmaster, soft pads), Isometric and Isotonic exercises, Post Isometric Relaxation (PIR), Proprioceptive Neuromuscular Fascilitation (PNF) techniques and Sensorimotor training. Results: After 6 therapeutic units with the patient, she was able to walk with increased confidence and pain free at the knee joint. Mobilization of the restricted joint movements was successful and released the...
|
|
Typology of Parléř Workshop's Figural Reliefs on Saint Vitus Cathedral 1356-1399
Smaha, Miroslav ; Homolka, Jaromír (advisor) ; Kuthan, Jiří (referee)
Anotace: Master Thesis "Typology of the figural plastics by Parler workshop in the St.Vitus Cathedral from 1356 to 1399" deals with the typological list of decorative sculpture of Saint Vitus workshop in direct connection to the chapel of All Saints on Prague Castle. It also shows the connections to Old-Town Bridge Tower and supposed influence on decorative sculpture of Prague church of Holy Lady on Tyne. Main chapters deal with the list of figural consoles with heads (masks) on architecture and with the identification of their every type and variant in connection to building development. Photographic documentation of the author was made in cooperation with Prague Castle Archive and with National Heritage institution. Picture supplement includes a lot of author photos of decorative details in situ from interior and from exterior of the cathedral as well as from the depository of building history and also from the standing exposition of Prague castle. The important part of this documentation is also not yet published photographic material (analogy) of figural consoles of Parlers church choir from the church of All Saints on Prague Castle acquired during the building reconstruction in 2008. Title: Typology of the figural plastics by Parler workshop in the St.Vitus Cathedral from 1356 to 1399 Author: Bc....
|
|
Point prevalence survey of healthcare-associated infections in the specialized surgical facility
CHMELAŘOVÁ, Šárka
My thesis is focused on the healthcare associated infections. This area is under considerable control in the developed countries and their health systems, whether in terms of medical, organizational, social, economic, or political. Epidemiology is the world's fastest growing field which knowledge can be applied very soon into everyday practice. The results of that have effect on the patients, whose visit in the hospital is becoming safer. It has also have effect on the healthcare that becomes a better and more professional. In our country, you can still meet the lack of awareness of professional and especially the current context, which accompanies this issue during the contact with the staff of health facilities. Nowadays, we are trying to implement the issue in our laws according to the requirements of the European Union. I try to outline this new European perspective on infections related to the healthcare in the theoretical part. We need to realize the main idea that these infections from healthcare facilities never disappear completely. In the interests of healthcare providers and their staff, it should be to get these infections under the control and to try to minimize the impact of these infections on the patients' health. The meaning of the term healthcare-associated infections or outdated nosocomial infections, and possible types of them, their most common cause and the process of their spread is explained at the outset of work. Afterwards I focused on explanation of the meaning of the prevalence survey as one of the methods of active surveillance. Thanks to the results of the Point Prevalence Survey, which was conducted in the European Union, Norway, Iceland, and Croatia in 2012, it was found that the European prevalence of healthcare associated infections is equal to 5.7%. These results are also commented in the thesis. This prevalence corresponds to every inflectional 18th patient hospitalized in the European acute care hospitals. The European Union Council Recommendation worked out the Infection Prevention and Control Programme in the healthcare facilities to reduce this prevalence. This programme with its details and requirements is described at the end of the theoretical part. In the next part I am aimed to the research, whose implementation is one of my goals. I conducted the Point Prevalence Survey according to the methodology, which was developed by European Centre for Disease Prevention and Control (ECDC). I chose specialized surgical facility for my research. My control sample is consisted of departments that have the same focus as my facility. They are focused only on plastic and reconstructive surgery. The departments were selected from the all Czech hospitals, where the Point Prevalence Survey was conducted in 2012. I received the data from the previous survey thanks to the National Institute of Public Health. I intend to provide the thesis to the specialized surgical facility as a feedback to the research which was carried out in there. Not only for me, but also for the local staff, the benefits are to familiarize with the prevalence survey and to realize that the healthcare-associated infections may still be an actual issue.
|
|
Molecular phylogenetics and geometric morphometrics of aerophytic green algae of Coccomyxa/Pseudococcomyxa s.l. complex
Nemjová, Katarína ; Neustupa, Jiří (advisor) ; Hampl, Vladimír (referee)
This thesis deals with molecular diversity and shape variation of the traditionally delimited unicellular coccoid genera Coccomyxa SCHMIDLE and Pseudococcomyxa KORŠIKOV (Trebouxiophyceae, Viridiplantae). The complex of these traditional genera was found monophyletic position within the class Trebouxiophyceae on the basis of 18S rDNA sequences. Subdivision of this lineage into individual clades was based on 18S rDNA, ITS1 and ITS2 sequences. The results did not confirm delimitation of traditional genera. However, they suggest ecological differentiation of individual clades. The results of phylogenetic analyses were further supported by reconstructions of ITS2 secondary structures and analyses of the compensatory base changes (CBC) among individual clades. The mutual relationships among clades remained, however, partially unclear. Geometric morphometric variation of cell shapes illustrated pattern that was mostly not correlated with molecular data. This indicates high degree of evolutionary plasticity and possible unreliability of these morphological features in taxonomy of the group. Powered by TCPDF (www.tcpdf.org)
|
|
Subcutaneous mastectomy as a prevention of oncological disease
Měšťák, Ondřej ; Měšťák, Jan (advisor)
This diploma paper is concerned with subcutaneous mastectomy as a prevention of breast cancer. We collected a group of patients who were operated for subcutaneous mastectomy on Departement of Plastic Surgery, University Hospital Bulovka in years 2001- 2005. Indication for profylactic mastectomy was based on severe fibrocystic mastopathy. In our study, we focused on medical history, histological findings, type and time of reconstruction.
|
|
Optimization of tomographic station GE phoenix adjustment for plastic components including metal parts
Starý, Přemysl ; Petrilak, Michal (referee) ; Zikmund, Tomáš (advisor)
X-ray computed tomography is a tool mostly used in a medical diagnosis. A development of the technique and an improvement an in accuracy of tomographic systems enabled an utilization of the tomography in industrial applications. The tomography allows non-destructive analysis of inner structure. There is a negative influence of a reconstructed area if a low-absorption and high-absorption materials are scanned together. This influence makes analysis of the inner structure impossible. There are two options to eliminate these artifacts. We can use algorithms to reduce metal artifacts, or we can try to avoid them when performing the scan. This bachelor thesis focuses on an optimization of tomographic station adjustment for the plastic components including metal parts. The effect of an usage of X-ray filter or collimator and effect of a sample orientation on data quality will be observed. We use tools like contrast, noise and edge sharpness to evaluate data quality.
|
|
Usage of 3D scanning in precise injection moulding
Chylík, Michal ; Čudek, Vladimír (referee) ; Zatočilová, Aneta (advisor)
The aim of this bachelor thesis is creating a complex study on the topic of 3D scanning and reverse engineering regarding technical praxis. Part of this bachelor thesis are three examples of usage. Using 3D scanner for reconstruction of plastic parts in marketing praxis, specifically for recovering of missing data and subsequent valuation. Using 3D scanner as an inspectional tool - a support for measurement of quality of plastic moulding. And last but not least an option of creating an identical part to fit requirements of tool shop. The drawing documentation including protocol for inspect and 3D models are included in the thesis.
|
guest ::
