|
|
Class D audio amplifier for active loudspeakers
Cupák, Jan ; Punčochář, Josef (referee) ; Kratochvíl, Tomáš (advisor)
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
|
|
|
Design of class D audio power amplifier for home use
Raba, Jaroslav ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design and construction of a complete audio power amplifier 2x100W of Class D. The proposal contains an active correction preamplifier unit, a power supply unit and indicator unit of the amplifier excitation. The power amplifier is composed of an integrated circuit TAS5611A from Texas Instruments. The correction preamplifier is controlled by four potentiometers. Excitation of the amplifier is displayed using LEDs. Basic parameters are measured and evaluated for all blocks of the amplifier.
|
|
|
Audio amplifier for detecting wood-destroying pests
Jaroš, Ondřej ; Křepelka, Pavel (referee) ; Friedl, Martin (advisor)
This bachelor´s thesis is focused on design of detector of wood-destroying pests, which is solved by using an acoustic sound source with piezo electric element as a sensor. The acquired signal is step by step amplified to a level when we can observe the audio spectrum using a headphone. The realized audio amplifier is complemented supplemented by an active analog filter for the ability to listen to a narrower frequency spectrum. The next feature of the detector is that it displays the frequency spectrum on an LCD display ranging from 0 Hz to 10 kHz. The spectrum of the signal is acquired by using DFT transformation. Analysis of the device is firstly described from the theoretical part through the realized design. At the end of document the results are summarized.
|
|
| |
|
|
Class D stereo audio power amplifier
Kazelle, Kamil ; Dostál, Tomáš (referee) ; Brančík, Lubomír (advisor)
The content of this project is design of stereo audio amlifier working in class D with output power 2x20W. Project includes also a design of preamplifier and power supply. This project is divided into the four parts. In first part the theory and problems of amplifiers working in class D is resumed, in the second the designed circuits are dicussed, in the third the results of simulations in the program PSpice are presented and the last part of project describes the realization and presents the results of measurements.
|
|
|
Design of an audio amplifier is class D
Holínský, Jan ; Šotner, Roman (referee) ; Kledrowetz, Vilém (advisor)
The thesis deals with principles of individual types of low frequency amplifiers. There are described principles of amplifiers in different classes with respect to their distortion and efficiency. Type D amplifier is described in detail block by block. There are also designed blocks of audio amplifier in the class D. The selection of components according to the necessary parameters is considered. The audio amplifier is designed so that its output power is closer to 100 watts per channel.
|
|
|
Construction and Control of Audio Amplifier
Dohnal, Ondřej ; Růžička, Richard (referee) ; Bidlo, Michal (advisor)
Audio amplifiers are parts and parcels of electronic devices. Their goal is to convert weak signals into stronger signals. This thesis deals with the design of an amplifier using vacuum tubes, which parameters can be adjusted remotely for example using a mobile phone. The thesis first describes the amplifiers and their specification. Furthermore, the issue of their design and the possibility of remote control is described in the thesis. As part of the work, an amplifier, a signal processor enabling its control and a communication interface used for control are designed and implemented.
|
|
|
Design of audio power amplifier with Bluetooth connectivity
Bartoň, Jan ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This bachelor‘s thesis deals with the task of designing an audio amplifier, operating in class D, with a nominal output power of 2 x 80 W with Bluetooth connectivity, supplemented by an equalizer and a state display. A power supply and a user interface are designed as well. At first, research regarding audio amplifiers is made, followed by a more thorough description of class D operating principles. Afterwards the actual synthesis of the desired amplifier is presented, followed by the power supply design procedure. The correctness of the synthesis is later verified by simulations in PSpice and LTSpice. Theoretical design is then practically built, and its parameters are confronted with expected values by measurements.
|
|
|
Audio Amplifier with Network Streaming and Sound Equalization
Liska, Matej ; Zeman, Kryštof (referee) ; Štůsek, Martin (advisor)
Diploma thesis contains the theory for the design and realization of a prototype audio amplifier device with the possibilities of digital or analog input content. It approach the features of D/A converter, analog filtering, volume control and amplification. Besides others, it describes the regulation of supply power voltages for individual active parts of device and approaches the software audio platform for acquisition and processing of audio data, including equalization. The thesis contains an general schematic design, created placement of individual components on board, including their table of descriptions and evaluation of the achieved results, including measured values and graphs.
|
|
|
Class AB stereo audio power amplifier with electron tubes
Herbrych, Vojtěch ; Šotner, Roman (referee) ; Kratochvíl, Tomáš (advisor)
Bachelor thesis deals with design and create construction drawings of audio amplifier using vaccum tubes with output power 20 W/4 and works in class AB. At least two inputs are included for mobile, computer and others. The device includes 2-band preamplifier with basic adjustment (bass and treble). For different channel volume is included balance adjustment. There is an audio-level indicator with „magic-eye tube“. This part of bachelor thesis contains theoretical explanation, design of amplifier´s schematic and design drawings.
|
guest ::
