|
|
Machining of polymericMaterials
Ondráček, Ivo ; Němec, Karel (referee) ; Molliková, Eva (advisor)
This bachelor’s thesis deals with the machining of polymeric materials and the major differences between the machining of metals and polymers or plastics. Introduction describes the basic elements in the history of the discovery and use of plastics. The thesis focuses on the basic division, further definitions and internal structure of the polymers. There are also discussed the most widely used machining technology and requirements for tools and materials. At the end of the work we are specified properties and selected types of plastic materials intended for processing. Practical informations were obtained during the visit to Brno company Belt Plast, Ltd.
|
|
| |
|
|
Optimization of a selected manufacturing production
Kolenič, Michal ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Táto diplomová práca popisuje optimizáciu obrábacieho procesu za účelom zvýšenia produktivity výrobnej linky. Zadanie bolo vypracované v priebehu priemyselnej stáže vo firme Stellantis na obábacej linke blokov valcov motoru DV. Práca vysvetľuje metódy analýzy strát produktivity na výrobnej linke a aplikácii opatrení smerujúcich ku zvýšeniu produktivity, obzvlásť nasadenie nástrojov štíhlej výroby. Najviac boli nasadené nástroje SMED, ktorého cieľom je optimizácia výmeny rezných nástrojov, a TPM, ktorý ma za cieľ zvýšiť spoľahlivosť výrobných prostriedkov.
|
|
|
Marketing Audit of a Company
Ermolin, Daniil ; Havíř, David (referee) ; Chalupský, Vladimír (advisor)
The master‘s thesis deals with marketing auditing of company Tungaloy Rus with a special focus on its employees’ satisfaction. The theoretical part of the thesis defines the meaning and importance of marketing audit, as well as the concept of employees’ satisfaction and modern approaches to its measurement. The analytical part of the thesis focuses on performing the marketing audit of company Tungaloy Rus and surveying the satisfaction of its employees. The proposal part of the thesis aims to making a set of recommendations based on the results of the marketing audit and the satisfaction research, which leads to improving the company's marketing activities.
|
|
|
On the analyses of cutiing tools coated with PVD coatings
Malý, Martin ; Osička, Karel (referee) ; Píška, Miroslav (advisor)
In this diploma thesis, literary research about drilling and coating technology focused on PVD coatings was performed. Furthermore, there is an overview of cutting materials. In the experimental part of the work, the attention is dedicated to tests of twist drills from cemented carbide and high-speed steel materials. For these drills, the feed force Ff and the cutting moment Mc were measured when drilling into austenitic stainless steel. At the end of this work, the technical and economic evaluation of the practical part is presented.
|
|
|
Machining of rotating Body-part on CNC lathe
Dlouhý, Vít ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This master's thesis is focused on the technology fundamentals of machining for the use of the CNC lathe which was used for machining the required parts are made of stainless steel. In the introduction are mentioned the historical milestones related to machine tools. In the following chapter is analyzed machining process and related fact. A follow-up chapter contains the parameters common to a modern machine tool CNC machines. Followed by the practical part with the characteristics of the machined components. The next chapter includes a selection of CNC lathe for production. Continued by selecting the appropriate cutting tool and adjusting the machine for the given component. They were applied a total of three variants of production with the subsequent evaluation. In conclusion, it became established fact, for example, the advantages of the shape tools or the use of more spindles during the machining.
|
|
|
Draft of rotary part production technology
Lánc, Kryštof ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
The thesis is focused on concept of manufacturing technology for rotary part in case of mass production. The main aim was established suitable manufacturing technology for rotary part, choosing lathe machine, cutting tools and creating of NC program. The part of diploma thesis contains configuration of lathe machine in software Sinumerik. Document includes also the basic rules for developing NC program for two channels lathe.
|
|
|
Ensuring and Control of Cutting Tools for CNC Machines
Vašíková, Simona ; Šedivý, Vladimír (referee) ; Jurová, Marie (advisor)
The bachelor’s thesis deals with the methods to ensure and control of a group of cutting tools and analysis of their consumption for production of stainless steel piston rods by the CNC multifunction machine and other additional machines needed for the production of this components. Theoretical bases are elaborated both from a technical and an economic point of view. Several possible solutions to the satisfaction of both business and customers are proposed.
|
|
|
Cutting tools manufacturing for micro-milling
Tkadlec, Jiří ; Dvořák, Jaromír (referee) ; Žídek, Jan (advisor)
This bachelor work is focused on the research of the problems of micro-cutting, exactly of micro-milling and manufacturing of cutting tools. The introduction contains basic analysis of micro-milling and specification of micro-milling. The main aim of this work is analysis of the manufacturing of cutting tools and analysis of cutting tools materials used for micro-milling.
|
|
|
Micro-turning applications in high precision manufacturing performed by diamond tools
Švorc, Josef ; Dvořák, Jaromír (referee) ; Žídek, Jan (advisor)
Bachelor thesis is focused on micro-turning. The work takes the form of a literary research, which aims to make an overview of the production technology. First, it deals with the definition of the topic itself and with the physical properties and phenomena that occur during micro-machining. Then it discusses the construction of micro lathes and their division into categories and compares them to each other. It also deals with the cutting tools suitable for this machining process and their production and shaping. The last part of the thesis is focused on the application and utilization of micro-turning in industry and on the creation of non-rotational components and micro-structures.
|
guest ::
