|
|
Design and realization stereophonic amplifier class D
Hradil, Jaroslav ; Háze, Jiří (referee) ; Pavlík, Michal (advisor)
The aim of this project is to design a class D stereo audio amplifier with output power of 2 x 50 W into 4 load with THD+N less than 10%. Project is divided into three parts. First part describes the principles of class D amplifiers, the second part contains actual design of amplifier and the last part presents the results of the measurements.
|
|
|
Class D 2.1 audio amplifier for laboratory measurements
Děcká, Klára ; Polák, Ladislav (referee) ; Kratochvíl, Tomáš (advisor)
This semestral thesis deals with a draft and construction of the design of an class D audio amplifier with pulse width modulation. The resulting design consists of a supply protection, an active crossover and the output power stage itself. The amplifier is made in 2.1 configuration, the amplifier for mid/high audio frequency drives 2 × 30 W output into a 8 load, subwoofer drives 1 × 100 W into a 2 load. The control centre of the whole application is an integrated circuit TPA3116D2 by Texas Instruments company. The resulting audio amplifier will be used as a device for laboratory measurements.
|
|
|
Class D stereo audio power amplifier
Kazelle, Kamil ; Dostál, Tomáš (referee) ; Brančík, Lubomír (advisor)
The content of this project is design of stereo audio amlifier working in class D with output power 2x20W. Project includes also a design of preamplifier and power supply. This project is divided into the four parts. In first part the theory and problems of amplifiers working in class D is resumed, in the second the designed circuits are dicussed, in the third the results of simulations in the program PSpice are presented and the last part of project describes the realization and presents the results of measurements.
|
|
|
The design of Audio Amplifier
Schenk, David ; Bohrn, Marek (referee) ; Šteffan, Pavel (advisor)
The theme of my bachelor’s thesis is a design of audio amplifier for the reproduction signal from electric guitars. I decided to combine the advantages of tube preamp with the advantages of digital amplifiers. The work describesthe principle activity of selected involvement, includes the anode voltage filter simulation, analysis and measurement of input and output parameters and thein evaluation. Technical documentation for realization of the amplifier contains printed circuit board.
|
|
|
Design of class D audio power amplifier for home use
Raba, Jaroslav ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design and construction of a complete audio power amplifier 2x100W of Class D. The proposal contains an active correction preamplifier unit, a power supply unit and indicator unit of the amplifier excitation. The power amplifier is composed of an integrated circuit TAS5611A from Texas Instruments. The correction preamplifier is controlled by four potentiometers. Excitation of the amplifier is displayed using LEDs. Basic parameters are measured and evaluated for all blocks of the amplifier.
|
|
|
Digital audio amplifier
Tiller, Jakub ; Kratochvíl, Tomáš (referee) ; Dřínovský, Jiří (advisor)
The subject of bachelor thesis is the class-D power audio amplifiers. Their expansion is mainly caused by high efficiency and good audio parameters. The aim of this project is analysis of class-D amplifiers and measurement of the audio parameters. In consequence, there is the design of class-D apmlifier as laboratory equipment with possibility of digital gain controll. At the end of this thesis, there are designs of automatic measurment in VEE Pro environment. The laboratory exercise also introduced in this thesis.
|
|
|
Audio amplifier controlled by the IP protocol
Dvořák, Petr ; Schimmel, Jiří (referee) ; Kouřil, Jiří (advisor)
The bachelor thesis is intent on projection and realization of a device whitch is capable of communicate with a remote client through the Ethernet making use of the protocol set TCP/IP. This communication will be used for the control of analog and digital outputs of the device, which is able to be attached to any amplifier of audio signals. One of used protocols is UDP. This protocol is closely described, because it is used for transfer of data controlling outputs. The whole device is controlled by microprocessor ATmega32, which operates the communication with the ethernet interface through the controller ENC28j60, the communication with the D/A converters MCP4922 and controlling of digital outputs and a display. The device has its own IP and MAC address for identification in the network. It is possible to edit both addresses in the menu of the device with the help of the module LCD, the display of 2x16 characters with fours buttons. The audio amplifier staffed by the voltage controlled by the computing amplifiers SSM2018T is connected to this device. The amplifier is proposed as six-channel with symmetric inputs through the connectors XLR and unsymmetric outputs through the connectors CINCH. The operating programme which is able to be run on PC with the operating system Windows is necessary for the remote control of the device in the network and all functions of the device are controlled by this programme. This programme enables to control the device after setting the IP address of the destination device and the communication establishment. The motherboard is proposed as a universal module which keeps at disposal up to 6 analog outputs with the range of the control voltage 0 – 5 V and up to 21 binary inputs/outputs.
|
|
|
Construction of class T audio amplifier
Tejmlová, Lenka ; Slezák, Josef (referee) ; Petržela, Jiří (advisor)
The aim of my bachelor’s thesis is to collect information about amplifiers, working in the T class. Because these amplifiers are usually used as digital power processing audio amplifiers, we mostly insist on the ability of sending, the signal without distortion, to amplify the frequency broadband signal, to obtain the high efficiency of the output stages and to obtain the peak quality of the sound. My task is to gather information and facts of principle of the function of the audio amplifiers working in the T class and reasonably priced integrated circuits of this class. Furthermore I am going to focus on the design of wiring of this amplifier with the 2x20 watts output, including the correction pre-amplifier, which provides correction of the heights, basses and volume. The amplifier is realized, in the end of bachelor’s thesis, there are measured it’s characteristics, which are compared to theory.
|
|
|
Power audio amplifier with AC/DC converter
Melša, Vojtěch ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
|
|
| |
guest ::
