|
|
Bridge across the I/11 road
Macák, Jan ; Šrubař, Jiří (referee) ; Panáček, Josef (advisor)
This diploma thesis deals with a project of a road bridge. The bridge is located on a second class road S 7.5/50 and goes over a I/11 road and a local road crossing in Bystřice. Three options of the road bridge are conceived out of which the connected beam girder is chosen for further development. A calculation of the structural stability of the load-bearing construction, that includes time analysis of the construction work (i.e. particular phases of the construction), is added to the project. The structural stability calculation is assessed in accordance with valid European standards. Drawing documentation, a time schedule and 3D visualization of the road bridge is also attached to the diploma thesis.
|
|
|
Price of construction according to future user point of view.
Prak, Michal ; Rosecká, Zdenka (referee) ; Tichá, Alena (advisor)
Thesis "Price of construction according to future user point of view" is focused on the user's possibilities of the influence of the building value associated with the leife cycle. In the thesis explains what is facility management and what is it regarded to and life cycle of the building. On the example of building a house techniques are utilized facility management. Designed there are four deigned variants for which are calculated itemized budgets, the energy consumption of the building and other cost of life cycle of the building. At the end of thw work there are these variants compared and the result implies which one is the most suitable for a future user.
|
|
|
Design of exhibition hall roof
Němec, Petr ; Ing.Paris Chalivopulos (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.
|
|
|
Design of prestressed box gireder bridge
Hofírek, Radovan ; Jurík, Michal (referee) ; Zich, Miloš (advisor)
This thesis deals with bridging of a lowland valley and the creek Dolanský in the section Jánovce – Jablonov on the Slovak motorway D1. Four variants of the bridge have been developed. Subsequently prestressed single box gilder with large overhangs that are supported by precast struts was selected as the most suitable variant. The construction of the bridge will take place in a formwork suspended on overhead launching scaffolding. The static assessment according to the Europan standard has been drawn up for this variant. The load of the bridge is projected according to the ČSN EN 1991-2 - Traffic loads on bridges and the dimensoin of concrete structures according to the ČSN EN 1992-2 - Concrete bridges - Design and detailing rules. The calculation of load is done using computer software SCIA Engineer 10.1 and Midas Civil.
|
|
|
The bridge road crossing in the town Příbor
Suchánek, Petr ; Pukl, Stanislav (referee) ; Klusáček, Ladislav (advisor)
This diploma thesis is focused on design and assessement of the road bridge in Příbor city, where road I/58 crosses road I/48. There are 3 possible of solution of designed structure which are slab construction, beam construction and prefabricated structure. Each solution includes the design and assessment of individual structures, including drawings and economic evaluation. In conclusion, the three solutions have been evaluated against all of the given criteria.
|
|
|
Wall crane
Kopecký, Libor ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with constructional design of wall crane. The aim of this thesis is to perform inspecting calculation according to actual standards and to create drawing documentation for loading capacity 600 kg and unloading 3750 mm according to assignment. Another part of thesis is to perform appropriate choice of pulley block according to important parameters.
|
|
|
Design of the roof structure over the garage
Kukla, Radim ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The bachelor´s thesis „Design of the roof structure over the garage“ deals design and dimensioning of concrete roof structure, consisting continuous two way slab. The slab is suportted by beams in both directions. The aim of the project is to desing and evaluate the ultimate limit state of reinforced concrete slabs and beams. Also was created computational model to analysis the construction, model was created in software Scia Engineer. To verify the resulting values of internal forces was used to the method of replacement beans. Finally was made drawings of roof structure.
|
|
|
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
|
|
|
Reinforced concrete structure of the apartment building
Ilčík, David ; Čairović, Dorde (referee) ; Šulák, Pavel (advisor)
The bachelor thesis is aimed for design and assessment of reinforced concrete locally supported monolithic slab and one selected column of a apartment building on the ultimate limit state. Another point of this work is to develop appropriate drawings. The apartment building has four above ground floors. Assessed slab is located on the second floor a column on the first floor. Internal forces are calculated using software Scia Engineer 2013. The Results of the software are compared with the results of the simplified manual method. The structure is designed according to ČSN EN.
|
|
|
Cost optimization of construction
Prak, Michal ; Waclawiec, Karel (referee) ; Tichá, Alena (advisor)
This thesis will address optimization of price of construction work, which is the renewal and modernization of a building in Karvina - mainly facades. From a price optimization programs will be used BuildPower from RTS and KROSplus from URS. As input materials will be used an itemized budget and the income statement from a specific building supply company.
|
guest ::
