|
|
Augmented Reality for Android Platform
Nohejl, Petr ; Beran, Vítězslav (referee) ; Láník, Aleš (advisor)
This thesis describes design and implementation of augmented reality system for Android platform using location sensors. The application serves as a navigation and displays geographical points of interest. Thesis deals with augmented reality on mobile devices, describes design of own framework and mentions the details about implementation of selected problems. Finally, the results are evaluated.
|
|
|
Position Tracking with GPS and PDA
Černohorský, Vilém ; Herout, Adam (referee) ; Szőke, Igor (advisor)
This work presents steps in creation of remote position tracking application. Document introduces history of geographical positioning and navigation, and describes development of navigation from primitive utilities to complex radio navigation systems. Global Positioning System is described in more detail including NMEA protocol used by GPS receivers. This work also presents several current navigation applications. Based on obtained information work presents analysis, object-oriented design and implementation of remote position tracking system.
|
|
|
Electronic Compass
Špaňhel, Petr ; Slaný, Karel (referee) ; Šimek, Václav (advisor)
This bachelor's thesis deals with a design and construction of equipment that should offer an easy approach to measurement of temperature, air pressure and angular orientation to the Earth surface. Subsequently, this set of infromation will be shown in a concise way on a graphic LCD display. The introductory chapter provides a general outline to the hardware conception, which primarily involves reading of data from sensors and their graphical visualization. Details on control firmware aspects are included in the following two chpaters. Fourth chapter is aimed at device operation and its user interface. Finally, evaluation of the results and conclusion is provided.
|
|
|
Robot Control Using FITkit
Novotný, Tomáš ; Orság, Filip (referee) ; Rozman, Jaroslav (advisor)
This paper deals with the teoretical background, design and implementation of the remote controlled robot, which is shipped with various sensors. Work is based on the available devices. FITkit is used for controlling sensors, motors and communication with the PC at the robot side. The different interfaces are used by almost every sensor. These are the I2C bus, PWM or analog signals. The biggest part of the controlling is done by the FITkit using programming C language. The FPGA is used just for the communication over the COM port. Later expansion was in the mind during the design and implementation. The result of this work is remote controlled robot with the sonars, compass, accelerometer and optical encoders.
|
|
|
Control and Position Stabilization of a Small Flying Drone
Martinec, Adrián ; Zamba, Martin (referee) ; Strnadel, Josef (advisor)
The goal of this thesis is to create a drone in a form of a plane, driven by autopilot. I have solved the selected issues using a theory of flight and regulators from an automatization area. The text describes a functional solution. Unfortunately because of an accident, no final tests were performed. A contribution of this work is in exploring a functionality of various parts that are used with a drone building process. That includes a use of regulators and creation of libraries driving those parts.
|
|
|
Robot Controlled by PIC Microprocessor Unit
Heřman, Petr ; Luža, Radim (referee) ; Rozman, Jaroslav (advisor)
This thesis describes design of a cheap robot. It includes implementation of firmware of low level control unit based on microcontroller PIC. The firmware drives motors, gains sensors data and communicates with the high level control unit. Furthermore the thesis presents realisation of connection to the robotic operation system ROS and its standard structures allowing usage of existing packages for the robot teleoperation and displaying sensor data on the remote computer. The thesis finally reports experiments with the robot. The constructed prototype is the model of the robotic lawn mower, however the whole solution has universal usage.
|
|
|
Control System of Small Mobile Robot
Rysnar, Jiří ; Florián, Tomáš (referee) ; Žalud, Luděk (advisor)
This master’s thesis elaborates on the control of a wheeled mobile robot and its sensor system. The sensors provide information about distances of obstacles in its surroundings and orientation in area. The communication is realized by radiomodems, commands and data are sent by serial link between microncontroller and the PC.
|
|
|
Sattelite Navigation and Compasss Data Fusion
Maceček, Ivo ; Kopečný, Lukáš (referee) ; Žalud, Luděk (advisor)
Theoretical information about different satellite navigation systems used for determination of position. Special attention is attended to system GPS. There are consulted main principles of the GPS and some error sources. Application of differential GPS for minimization of these errors is discussed. Next part is about examples of basic principles for measuring earth magnetic field. Last chaps are about practical realization of mentioned DGPS, which is applied for outdoor mobile robot navigation. There is described hardware structure, software utilities and application of an aided tool for GPS - electronic compass. Some practical measurements and results are presented.
|
|
|
Minidarpa robot - sensors
Sedlák, Luboš ; Šembera, Jaroslav (referee) ; Kopečný, Lukáš (advisor)
Bachelor's thesis be concerned with sensoric system of mobile robot Minidarpa. It means sonar which locate space ahead robot, camera for navigation, electronic compass to compute the direction of the Earth magnetic field and accelerometer which designates tilt, speed and position.
|
|
|
Usability of compass in indoor mobile robot navigation
Pilch, Petr ; Ripel, Tomáš (referee) ; Krejsa, Jiří (advisor)
This work is focused on usability of compass HMC6343 for controlling the mobile robot in an indoor environment. The first part shows the history of compass and describes the principle of operation of some types of compasses including anisotropic magnetoresistive sensor. HMC6343 compass used for the measurements in real environment is based on this principle. The measurement is evaluated and the usability of data gathered this way is discussed the second part of the thesis.
|
guest ::
