|
|
Design of paddle shifts for formula student
Dugas, Martin ; Vrána, Radek (referee) ; Koutný, Daniel (advisor)
This bachelor thesis concerns design of paddle shifters for Formula Student. It deals in theoretical part with knowledge of today’s shifting mechanisms, additive manufacturing technologies and ways of weight optimization of parts. In design section, it covers with actual solutions of this problems, whereas the most important target was to minimalize mass and maximize stiffness of the whole mechanism.
|
|
|
Formula Student Drivetrain Components Design
Kolečář, Tomáš ; Píštěk, Václav (referee) ; Ramík, Pavel (advisor)
This batchelor´s thesis deals with description of formula student drivetrain components. Knowledge acquired in the theoretical part is applied in construction part of thesis. With structural design relates determination of drivetrain loading, stress analysis of driveshafts, stub axles and sprocket´s flange. All components were designed by using finite element method in software Ansys Workbench.
|
|
|
Car body design of Formula Student
Štěpánek, Jan ; Řezníček, Svatopluk (referee) ; Haltof, Vladimír (advisor)
The subject of this thesis is to design a body of a formula car, participating in international Formula Student competition. The work includes the designing proces of three concepts, one of which is selected as the final version. This variant is than finalized with technical, aerodynamic and manufacturing aspects in mind.
|
|
|
Formula Student Clutch
Drbal, Milan ; Zubík, Martin (referee) ; Janoušek, Michal (advisor)
This thesis deals with clutches used in Formula Student competition, calculation of the clutch used in Husqvarna FE 501and Husaberg FE 570 motor and modification of FE 570 clutch for usage in turbocharged version of the Husqvarna FE 501 with Garret turbocharger. The clutch is multi-plate wet clutch with pressure plate spring. Modification is done by installing bigger clutch set from Husaberg FE 570 engine, which is more suitable for usage in a racing car thanks to bigger torque transferred by the clutch. In the first part a research of multi-plate clutches, which can be found in most of the modern motorcycle engines was done. In the second part the calculations were made in order to set an approximated torque possible to transfer with stock Husaberg FE 570 clutch and a modification design for improvement with realisation.
|
|
|
Formula Student intake system
Ševčík, Miroslav ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This bachelor thesis describes air intake design of Formula Student cars. The first section describes the rules of the competition. In second part we can find description of individual components of the intake system. The third chapter describes the different ways of supercharging and cars that use them. The last chapter provides an overview of possible innovations in the rules for 2015.
|
|
|
Design of aerodynamic wings of Formula Student / SAE
Fryšták, Lukáš ; Lajza, Ondřej (referee) ; Popela, Robert (advisor)
The objective of this thesis is design of aerodynamic wings for Formula Student/SAE car. Firstly, Formula Student is introduced and regulations concerning aerodynamic devices are discussed. Design of two-element inverted wing is described and this two dimensional airfoil section is analyzed in CFD. Forces acting on a moving vehicle are analyzed and effect of aerodynamic loads on vehicle dynamics is considered.
|
|
| |
|
|
Conception of mounting Formula Student engine to dynamometer
Špičák, Milan ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This bachelor thesis describes the mounting of single cylinder motorcycle engine on a dynamometer. The first part is about Formula Student competition. It also contains an overview of the motor testing cells, including measuring equipment. Finally describes the draft of mounting the engine Husaberg FE 570 on dynamometer Superflow SF-902 including virtual model for illustration.
|
|
|
Composites Application in Automotive Industry
Bačovský, Marek ; Dundálek, Radim (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis deals with the use of composites in the automotive industry. The first part of the thesis processes overview of the basic properties of composites, their structure, characteristics, advantages and disadvantages. The second part focuses on their application in series manufacture and in racing cars, incl. Formula Student. The final section provides a view into the future and the overall evaluation of composite materials.
|
|
|
Water Cooler for Formula Engine
Malovaný, Daniel ; Beran, Martin (referee) ; Svída, David (advisor)
The purpose of this thesis is to analyze the radiators and cooling systems used in cars participating in the competition Formula Student/SAE. Furthermore, based on input conditions to make a basic calculation and design of the water cooler and in the end of this work to evaluate the proposal.
|
guest ::
