|
|
Application of wire electrodischarge technology
Barabáš, Martin ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This marter’s thesis deals with the technology of electrical discharge wire cutting. There is described the basic nature of the electrical erosion, EDM principle and WEDM principle. The main part deals with the application of wire cutting in the manufacture pulley 68-8M-130 with a description of technology on the wire cutter Excetek V 650. At the end of the work is devoted to the statistical evaluation of the precision machined surfaces.
|
|
|
Design of production technology of shaped cover
Doležal, Václav ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
This thesis presents a design technology of forming a shaped lid focused on cutting, bending, drawing, as well as trimming and making the required holes. There is described several basic variants of sheet metal forming based on the literature. Production of holes of specified cover, for an annual production of 100 pieces of shaped lid, is solved by unconventional technologies. From subsequent economic evaluation of selected technologies is chosen an appropriate technology to minimize production costs.
|
|
|
Technology of wire electrical discharge machining
Brázda, Radim ; Krkavec, Martin (referee) ; Osička, Karel (advisor)
This master´s thesis deals with unconventional technology of wire electrical discharge machining. There are described the principles and essence of electrical discharge machining and the principles related to wire electrical discharge machining with emphasis on the application of this technology in terms of medium-sized engineering company. There is also described the complete assembly of technolgy wire cutting and machining on wire cutter Excetek V 650. Then in the work there are statistically evaluated parameters precision machined surfaces, specifically to the belt pulley 116-8M-130. At the end of the work there is the technical-economic evaluation that addresses the hourly cost of machining on wire cutter Excetek V 650.
|
|
|
Wire Electrical Discharge Machining.
Bartoš, Pavel ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This work deals with analysis of EDM wire cutting technology and aims to assess the current situation and the real possibilities of EDM wire cutting usage in a small engineering company. Furthermore, it addresses manufacturing technology of a model component and the subsequent economic evaluation.
|
|
|
Trends in use of non-conventional technology for electrical discharge machining.
Mouralová, Kateřina ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The aim of this dissertation are future trends of electrical discharge machining in conditions of a small tool factory. In the introduction is presented the theory of non-conventional machining. The practical part is focused on valuation the current level of electrical discharge machining, the importance of the use in a tool Nástrojárna Ryšavý. It also compares the level of leading global manufacturers of electrical discharge machines and future trends of electro-discharge technology.
|
|
|
Wire electrical discharge machining at production of tools for working of wood
Sedláček, Jiří ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
My thesis is aimed at the application of wire electical discharge machining technology in the production of woodworking tools. All of this in the conditions of Vydona company. There is a theory of machining method plus a well-aranged division of cutter tools for wood in the introduction. The practical part describes in detail the procedur of cutting shaped plate out of tungsten carbide. As a result of the technical and at the same time the economic evaluation is an establishment of hourly rate for machine.
|
|
|
Wire electrical discharge machining
Gvizd, Michal ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
Bachelor thesis elaborated during the bachelor study discusses the electrical discharge cutting of materials with a wire electrode and its usage in industry. The thesis is divided into two fundamental parts –the theoretical and the experimental one. The theoretical part describes the historical development, explains the basic principle and fundamentals of this unconventional way of machining with the definition of methods using this technology. The thesis is focused on the electrical discharge machining, thus gougers are mentioned only peripherally. Afterwards, the wire electrodes used, main machine parts, cutting conditions and advantages of this technology are analyzed in detail. The experimental part deals with the evaluation of cutting surfaces of the sample components with respect to dimension accuracy, surface quality and describes factors which affect these characteristics. The emphasis is put on the machining of the tool steel. Conclusion discusses the analysis of the assembled measurements, their technological/economical analysis and outlines the direction of development in the possibilities of this unconventional technology of material separation.
|
|
| |
|
|
Wire Electrical Discharge Machining
Barabáš, Martin ; Osička, Karel (referee) ; Sámelová, Vendula (advisor)
The work deals with the technology of electrical discharge wire cutting. The first chapter describes the principle of EDM machining with the basic description of the methods using this machining technology. The main part is concentrated on describing electric discharge wire cutting principle, used wire electrodes, the main parts of the machine, cutting conditions and benefits of this technology. The last chapter describes current trends in wire cutting, news from producers of wire cutters and possibilities of this technology.
|
|
|
Wire Electrical Discharge Machining
Brázda, Radim ; Slaný, Martin (referee) ; Sámelová, Vendula (advisor)
This work deals with the technology of wire electrical discharge machining. The first chapter describes the basic principles and essence of electrical discharge machining. Then the work deals with the wire cutting in terms of wires, machines and cutting conditions and benefits of this technology. In the last chapter the work is focused on trends and news in wire electrical discharge machining and also describes the possibilities of this technology.
|
guest ::
