|
| |
|
|
Fishing alarm in LPD band
Dufek, Ivo ; Šebesta, Jiří (referee) ; Frýza, Tomáš (advisor)
The main objective of this project is analysis, design and construction of three channel wireless extension box for electronics bite alarms in LPD band. Wireless ex-tension box set consist of transmitter and receiver. Both of them are based on Aurel hybrid modules and Atmel AVR microcontrollers. Microcontroller in transmitter media-tes processing input data, their coding, securing and transmitting. At the receiver side microcontroler has to interpret data from hybrid module and start correct visual and acoustic signalization. Construction of this extension box set is described in two independent chapters. The solution contains brief introduction, description of each function block, some im-portant components, general schematics, design of PCB and description of the firm-ware. The last chapter is common for transmitter and receiver and describes recom-mended antennas.
|
|
|
Microcontroller programming in GNU/Linux
Jančík, Martin ; Frýza, Tomáš (referee) ; Fedra, Zbyněk (advisor)
This project is dealing with programming problems of the micro-controllers Atmel AVR in the system GNU/LINUX. It demonstrates wide programming possibilities micro-controllers of the system GNU/LINUX not only for the programming tasks, but for upload program to 8-bits controllers as well. The Project is aimed at the software, equipped with a graphic user´s interface, conceivably at a software enabling its control from a console. Further more, there are programming methods for the micro-controllers Atmel AVR described here, a survey of programs for micro-controllers AVR within the system LINUX is comprised there, as well as the proposal of some simple serviceable application using the micro-controller – displaying of the system information from a PC on an external LCD screen.
|
|
|
Board computer for car
Lutera, Ondřej ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
This thesis deals with the design and implementation of car computer with multi-user mode and data recording. The measurement is performed by using a direct connection to the sensors and fuel injector of engine. The measured signals are processed and evaluated by Atmel Atmega128A microcontroller. Measured and recorded data are displayed on the graphical LCD.
|
|
|
Emulator of 3.5" diskette drive using RS232 and SD memory card
Sedláček, David ; Hanák, Pavel (referee) ; Pavelka, Ondřej (advisor)
This thesis deals with the design of the 3,5" floppy drive emulator with ATMEGA microprocessor unit. The emulator has been designed according to the principles of designing electronic devices, there is also object-control application and firmware for a microcontroller, which supports MFM coding. The thesis also lists all the formats of data stored or transmitted along with some flowcharts.
|
|
|
Autonomous programmer of AVR microprocessors with Ethernet connectivity
Verner, Lukáš ; Daněček, Vít (referee) ; Kravka, Martin (advisor)
he main purpose of this semestral thesis is to get to know programming of Atmel AVR microcontroller, working with SD/MMC cards, working with ethernet (TCP/IP) to create a standalone programmer of AVR microcontroller with ethernet connectivity. The first part deals with the questions of programming theory of memories inside microcontrollers and description of programming algorithm. The most used programming method is called „In System Programming“ - ISP. This method provides easy and fast manipulaton. Concept of this programmer is designed for this ISP method. In this thesis is too explain how to work SD/MMC card and file systém FAT16. This knowledges are necesary to store binary program inside standalone programmer. In final part and in attachments there is hardware design, electrical scheme, bill of materials, printed circuit board.
|
|
|
Position system design
Balogh, Jaroslav ; Čížek, Martin (referee) ; Čech, Petr (advisor)
The purpose of this diploma thesis was to explore possibilities, design and build 2D position system driven by PC via USB. ATmega16 and FT232R were used as the most important parts of hardware solution. Software for control of the position system was designed in C++ Builder and it can run under MS Windows XP. This work is based on semestral thesis and in future can be used in other applications or modified. 2D position system will be later used by UBMI in education and scientific applications.
|
|
|
Thermostat for measuring passive component controlled of AVR
Demjanics, Ferenc ; Koňas, Petr (referee) ; Roubal, Zdeněk (advisor)
The aim of this work is to familiarize with the design of the thermal test chamber to measuring passive components. Show features and involvement of selected circuits that ensure reliable operation of the device. For the realization of the role are the most important the Peltier cells and temperature sensors. But they can not work without the control unit. The control unit provides the necessary communication with each component and also with user. For this purpose we made a selection of suitable type of microcontroller and communication equipment (matrix keypad, LCD, buttons and LEDs). Subsequently was designed the algorithm to control the thermostat suitable for using in students training. The algorithm was written in the microcontroller in form of a program. There is also implemented a PSD controller in the program, which evaluates the data collected by a sensor. Then set the correct function of Peltier cells. After the thermostat was designed and realized, test measurements were performed and the results were documented and evaluated.
|
|
|
Image processing algorithms in eight-bit microcontroller
Rébl, Miroslav ; Fajmon, Petr (referee) ; Fedra, Zbyněk (advisor)
The aim of master thesis was to investigate a simple camera and processor Atmel AVR unit implementation. Thesis describes how to get image from C3088 module and management over the bank of camera registers. Work includes limitation draft for this way of processing the information. Thesis also solves an exemplary model for object recognition using this implementation.
|
|
|
FSK modem with AX.25 protocol
Vojtek, Michal ; Šebesta, Jan (referee) ; Fuchs, Michal (advisor)
The purpose of this thesis is to design FSK modem for Packet communication. In accordance with accessible literature was constructed functioning circuit schema and subsequently there was constructed a motherboard which is mainly assembled from SMD technology. It makes this modem mobile and very easy usable in terrain. Modem communicates with PC via USB bus. Also this bus is used as power source for this device. Communication between modem and PC is realized by KISS protocol and connection with tranciever is realized by AX.25 protocol.
|
guest ::
