|
|
Mountain hotel in Beskydy
Kubášková, Barbora ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
This thesis solves design of timber structure of mountain hotel in Beskydy. The hotel is two-storey building with residential attic and no cellar. The ground plan of the building is about 15x26 m and height of the building is 14,76 m. The type of roof timbers was chosen from two options. There was used structural timber of the strength class C24, glued laminated timber of the strength class GL24 and steel S235. Program Scia Engineer was used for the static analysis of the structure. There was made only linear calculation.
|
|
|
Sport hall in Jihlava
Milich, Marek ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The aim of this master´s thesis is design and statically examine a bearing structure of ice hockey stadium in Jihlava with axial ground area measuring 43x85 m. Design od structure was prepared in three variants. The core bearing structure composed of three-joint arched roof beam create timber and steel lower beam, or solid wood of glulam timber. The third variant was work out in detail. Scia Engineer 2013 software has been used to create a three-dimensional model for the purpose of dimensioning each member and global analysis. Results obtained from the computer analysis were taken and double-chcecked with a hand assessment of the structure elements.
|
|
|
Roof structure of sport stadium
Pijáčková, Jana ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of this thesis was to develop a conversion and a variant of the existing steel structure roofing ice rink in Třinec. The building has a rectangular plan on pages 90 m x 60 m, minimum headroom inside the building is given with regard to the requirements of operation. The roof structure is stored in steel and concrete columns around the perimeter at a distance of 7.5 m. Variant solution for the design of new steel roof structure was chosen arc grate. The design consists of 13 main arc lattice girders in the transverse direction for a distance of 7.5 m in the longitudinal direction of the structure consisting of planar lattice strips (girders) and purlins. All this is complemented by a reinforced system. Two dimensions are retained.
|
|
|
Load carring structure of a riding hall
Kubíček, Michal ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Master's thesis describes the design and check of the construction of the riding hall. Here are compared two versions the steel structure riding hall. For select version is here technical report, design calculation, statement of material and design documentation. Next is prepared specialization in the field of building construction.
|
|
|
Curling building
Nováková, Hana ; Buchta, Stanislav (referee) ; Pilgr, Milan (advisor)
Design of load bearing steel structure of a curling building. Examination of main load bearing building blocks. Examination of selected details. Drawing of disposition and selected details. Elaboration of manufactory drawings of chosen segments.
|
|
|
The multipurpose shopping centre in Vsetín
Mužná, Alena ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
Objective of the work is desingning the steel structure of multipurpose shopping centre. Structure is in two sections, structure A has two floors and structure B is ground floor. The main bearing components are the traversal restrained columns and the strut-frame stringers and traverse frames. Frame stringers are after the the axial distance 15 m. Ceiling are designed as a composite. The purlins are plate and trusses. The structure is desingned for the distrikt of east Morava.
|
|
|
Museum Hall
Zouharová, Ivana ; Štrba, Michal (referee) ; Barnat, Jan (advisor)
Object of this master´s thesis is design of supporting steel structure for museum. Ground plan of building is T letter shape. The longest ground plan dimension is 60m. Height of partial sections is different. Maximum height is 12,2m. All sections of construction consist of similar structure system. Construction of roof consists of arched girders. Purlines are embedded on girders. Girders are held by columns. Stability of the structure is provided under system of bracing. The structure is designed for the locality of Brno.
|
|
|
Exhibition pavilion
Španihel, Jiří ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.
|
|
|
Steel structure of an industrial hall
Janoušek, Vít ; Milan,, Šmak (referee) ; Sýkora, Karel (advisor)
The diploma thesis contains design of steel one-aisle industrial hall with span 24 m, length 63 m and height of the holder of a crane track girder 8,7 m. In hall are two overhead cranes, first with load capacity 50 tons and second with load capacity 32 tons. Main structural material is steel S 450. Is processed several versions and one is processed in detail. Drawings contain platform and section of hall and manufacturing drawings of crane runway.
|
|
|
Sports hall
Horká, Petra ; Ing. Josef Puchner,CSc. (referee) ; Sýkora, Karel (advisor)
The goal of this master´s thesis is to design load bearing structure of a sports hall. The thesis is elaborated in two variants of the structure design of the sports hall for common types of sports (handball, footsal, tennis, volleyball, basketball). The ground plan dimension is 42 to 72 meters and the construction height is 8 meters. The construction is designed for the district of Brno city. In the structural anlysis there were the following main load bearing structural elements designed and examined: glue laminated timber truss, wood purlins, steel beams, rods and bracing, columns, which together with the transverse girders are linked and foot and anchoring. The selected variant is also further developed. Part of the work is drawing documentation of the choosen variant, disposition drawing and drawings of the selected details.
|
guest ::
