|
Analysis of selected company’s supply chain management
Khop, Vojtěch ; Filipová, Alena (advisor) ; Zeman, Jiří (referee)
The thesis deals with an evaluation of supply chain management and other processes involved in customer requirements management of a selected company. The aim of the thesis is to describe and evaluate processes of all the company´s sections involved. The first part presents basic terminology, followed by theoretical part dealing with presentation of the company. Individual sections are described and set processes are evaluated. In case of deficiencies, corrective measures are proposed. The last chapter includes a SWOT analysis.
|
|
The Conclusion of a Contract under the United Nations Convention on Contracts for the International Sale of Goods in Comparison with Czech National Legislation
Krčálová, Kristýna ; Boháček, Martin (advisor) ; Levý, Jan (referee)
This Master's thesis focuses on the United Nations Convention on Contracts for the International Sale of Goods (CISG), better known as the Vienna Convention. The main purpose of this thesis is to evaluate conditions for application of this international treaty and to assess the contracting process under the CISG including the similarities and differences with the Czech national legislation. Finally, it seeks an answer to the question, which of these rules (international or national) are more advantageous for a Czech contractual party with respect to concluding a contract. The thesis is divided into five parts. The first one represents an introduction to the CISG, its origin and the Czech Republic's attitude to it. The second part identifies the conditions for application of the CISG and therefore defines a subject and an object of an international contract of sale under the CISG. Both third and fourth parts gradually introduce two phases of the contracting process (offer and acceptance) including the relevant case-law. The last chapter strives to complete the contracting process with an analysis of the exact moment, when a contract is concluded, as well as with an analysis of a potential battle of the forms and its impact on a contract conclusion.
|
|
Family housing decision-making
Kačírková, Petra ; Brožová, Helena (advisor) ; Adam, Adam (referee)
This thesis is concerned with choosing the best and most real estate mortgage loans for family with children. The family should be chosen property near his residence momentary, then it should be recommended for this property the best mortgage loan. Selecting the property was affected by the demands of all family members and subsequent mortgage loans was selected from the products offered on the Czech market in November 2016. The thesis can be thematically divided into three main parts. The first part includes a literature search, which is divided into two areas. First described methods of multi-criteria decision making, which will be used in the decision making process. Along with these methods includes a literature review and theoretical part of the program area Super Decisions, which will be used in the practical part. Furthermore, theoretically they recognized concepts related to mortgage loans, according to which are then laid down criteria for assessing mortgage loans. The second part contains already a practical perspective on family issues, which therefore includes the selection of the best and most real estate mortgage loan program with the help of Super Decisions. The third part includes a summary of the work and the interpretation of results obtained through the program Super Decisions.
|
|
Development of electronisation of local administration of Zábřežsko micro region in relation with e-government
Filipová, Lucie ; Ulman, Miloš (advisor) ; Martin, Martin (referee)
Thesis "Development of an electronisation of local administration of Zábřežsko micro region in relation with eGovernment"examines the issues of the development of electronisation of autonomy in relation to legislation and eGovernment. The topic of the public administration has been increasingly discussed in recent years not only in the context of increasing demands for processing speed and information, but also to facilitate transparency and sub-processes in public administration. Theoretical part describes the role of eGovernment in the public administration, the process of electronisation of public administration and individual services of eGovernment (Czech POINT, data boxes, basic registers, communication infrastructure of public administration), which are being in place with municipalities. The practical part evaluates the situation of software and hardware equipment, legislatively bound on a contract software and service of eGovernment on a sample of villages Zábřežsko. On the basis of the results of the questionnaire researches are determinated recommendations for sample of 20 micro region Zábřežsko.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Possibilities in monitoring of laser welding process
Horník, Petr ; Mrňa, Libor
With increasing demands on the quality of the welds, it is usual to apply automated machine welding with monitoring of the welding process. The resulting quality of the weld is largely affected by the behavior of keyhole. However, its direct observation during the welding process is practically impossible and it is necessary to use indirect methods. At ISI we develop optical methods of monitoring the process based on analysis of radiation of laser-induced plasma using Fourier and autocorrelation analysis. Observation of keyhole inlet opening is partially possible through a coaxial camera mounted on the welding head and the subsequent image processing. A high-speed rear camera to understand the dynamics of the plasma plume. Through optical spectroscopy of the plume, we can study the excitation of elements in a material. Shielding gas flow can be visualized using schlieren method.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Code Characterization for Automated User Interface Generation
Kadlec, Jaroslav ; Slavík,, Pavel (referee) ; Sochor, Jiří (referee) ; Zemčík, Pavel (advisor)
Práce představuje nový přístup v automatizovaném vytváření uživatelských rozhraní. Na základě taxonomie pro charakterizaci dat byla vyvinuta nová taxonomie pro charakterizaci kódu. Tato taxonomie označuje významné vlastnosti dat a kódu tak, aby ji bylo možné použít v procesu automatického vytvoření uživatelského rozhraní. Taxonomie je platformově nezávislá a může být uložena jako součást metadat nebo v externím souboru. Na základě taxonomie je představený proces automatického vytvoření uživatelského rozhraní s detailnějším popisem jednotlivých kroků. Celý proces generování uživatelského rozhraní je demonstrován na příkladech.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Gramatová, Elena (referee) ; Racek, Stanislav (referee) ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
|
Methodology of highly reliable systems design
Straka, Martin ; Kotásek, Zdeněk (advisor)
In the thesis, a methodology alternative to existing methods of digital systems design with increased dependability implemented into FPGA is presented, new features which can be used in the implementation and testing of these systems are demonstrated. The research is based on the use of FPGA partial dynamic reconfiguration for the design of fault tolerant systems. In these applications, the partial dynamic reconfiguration can be used as a mechanism to correct the fault and recover the system after the fault occurrence. First, the general principles of diagnostics, testing and digital systems dependability are presented including a brief description of FPGA components and their architectures. Next, a survey of currently used methods and techniques used for the design and implementation of fault tolerant systems into FPGA is described, especially the methods used for fault detection and localization, their correction, together with the principles of evaluating fault tolerant systems design quality. The most important part of the thesis is seen in the description of the design methodology, implementation and testing of fault tolerant systems implemented into FPGAs which uses SRAMs as the configuration memory. First, the methodology of developing and automated checker components design for digital systems and communication protocols is presented. Then, a reference architecture of a dependable system implemented into FPGA is demonstrated including several fault tolerant architectures based on the use of partial dynamic reconfiguration as the mechanism of fault correction and the recovery from it. The principles of controlling the reconfiguration process are described together with the description of the test platform which allows to test and verify the design of fault tolerant systems based on the methodology presented in the thesis. The experimental results and the contribution of the thesis are discussed in the conclusions.
|
guest ::
