|
Analysis of Reporting in Business and its Technological Coverage by Microsoft BI
Lučan, Martin ; Pour, Jan (advisor) ; Pavlíčková, Jarmila (referee)
This master thesis deals with an analysis of reporting in business and its technological coverage by Microsoft Business Intelligence portfolio. The main objective of this work is to analyze the individual organization's requirements on reporting and coverage options. This work can serve as a tool for implementation of reporting in a company or for increasing the efficiency of reporting. The first part is theoretical. It deals with Business Intelligence as an environment for reporting. It also defines the basic concepts. The next part covers the area of reporting. This section provides an insight into the history, definition of outcomes and detailed classification of reporting from different perspectives. Furthermore, the definition of users reporting and the reporting standards in companies is also covered. At the end of this chapter, there is the definition of the benefits of reporting for companies. The main part of this master thesis is an analysis of the requirements for reporting in companies. The chapter defines five key perspectives which are described in a greater detail. The methods how companies should methodically approach these requirements are also discussed. The chapter further looks at the requirements for a concrete report. An output of this chapter is an effective template for gathering requirements for a specific report. The last chapter focuses on reporting portfolio analysis of Microsoft and defines the concept of Microsoft. It provides detailed information about reporting products that Microsoft offers. An analyses and a mapping of the individual characteristics of the products and the requirements is defined in this thesis.
|
|
Design of the pilot Business Intelligence solution for e-commerce platform
Kabrhelová, Kateřina ; Novotný, Ota (advisor) ; Vysoký, Ondřej (referee)
This thesis deals with the design of the pilot Business Intelligence solution for e-commerce platform Shopio. The first part describes the theoretical concepts of Business Intelligence and e-commerce focused on possible approaches to performance measurement of electronic commerce. Furthermore there is a comparison of analytical tools for measuring performance of e-shops which are available on the Czech market. The second part of the thesis first describes the e-commerce platform and the current status of the reporting module. Then the requirement analysis is conducted for the purpose of identifying the current company client's needs and requirements. The new Business Intelligence solution is designed based on the identified requirements described in the previous chapters. This solution is then tested and verified with the use of real e-shop data. The main purpose of this thesis is to refine the current status of the reports and provide a better tool to measure the e-shop performance for the e-shop owners.
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Developing open approach to mathematics in future primary school teachers
Samková, L. ; Tichá, Marie
In our contribution we focus on the possibility to develop open approach to mathematics in future primary school teachers during a university course on mathematics conducted in inquiry-based manner. We analyse data obtained in the beginning and in the end of the course with respect to two main aspects related to open approach to mathematics: searching for all solutions of a task, and acceptance of different forms of notation of a given solution. Data analysis revealed in the participants three different shifts towards open approach to mathematics, and showed that after the active participation in the course each of the participants improved at least in one of the monitored aspects, and that none of the participants got worse in any of the aspects.
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Effect of snowpack on runoff generation during rain on snow event.
Juras, Roman ; Máca, Petr (advisor) ; Ladislav , Ladislav (referee)
During a winter season, when snow covers the watershed, the frequency of rain-on-snow (ROS) events is still raising. ROS can cause severe natural hazards like floods or wet avalanches. Prediction of ROS effects is linked to better understanding of snowpack runoff dynamics and its composition. Deploying rainfall simulation together with hydrological tracers was tested as a convenient tool for this purpose. Overall 18 sprinkling experiments were conducted on snow featuring different initial conditions in mountainous regions over middle and western Europe.
Dye tracer brilliant blue (FCF) was used for flow regime determination, because it enables to visualise preferential paths and layers interface. Snowpack runoff composition was assessed by hydrograph separation method, which provided appropriate results with acceptable uncertainty. It was not possible to use concurrently these two techniques because of technical reasons, however it would extend our gained knowledge. Snowmelt water amount in the snowpack runoff was estimated by energy balance (EB) equation, which is very efficient but quality inputs demanding. This was also the reason, why EB was deployed within only single experiment.
Timing of snowpack runoff onset decrease mainly with the rain intensity. Initial snowpack properties like bulk density or wetness are less important for time of runoff generation compared to the rain intensity. On the other het when same rain intensity was applied, non-ripe snowpack featuring less bulk density created runoff faster than the ripe snowpack featuring higher bulk density. Snowpack runoff magnitude mainly depends on the snowpack initial saturation. Ripe snowpack with higher saturation enabled to generate higher cumulative runoff where contributed by max 50 %. In contrary, rainwater travelled through the non-ripe snowpack relatively fast and contributed runoff by approx. 80 %.
Runoff prediction was tested by deploying Richards equation included in SNOWPACK model. The model was modified using a dual-domain approach to better simulate snowpack runoff under preferential flow conditions. Presented approach demonstrated an improvement in all simulated aspects compared to the more traditional method when only matrix flow is considered.
|
|
Managerial skills
Červinková, Barbora ; Kříž, Josef (advisor) ; Zdeněk, Zdeněk (referee)
The theoretical basis of this thesis explains the terms closely associated with the management and managerial skills. Introductory part relates to approach the concept itself and the executive management, we are further broken down managerial functions, which are continuously illuminates to describe other skills, such as communication, goal setting, skills and coaching. The main point is to approach the concepts of soft and hard skills that managers should possess, or which should in the course of his practice to learn. Only by careful control of both of these groups of skills can lead to good organization. For a clearer explanation of the managerial skills included graphic view, which approximates the distribution of skills. In the second part, a practical part, described the situation with the existing skills of managers in the selected company. Thanks to the questionnaire, it is possible to measure the current level of acquired skills of managers at three levels and can be evaluated, what is the interest of improving individual skills, or whether managers feel sufficiently qualified for their job positions.
|
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
|
Methods of Automated Model Transformations in Information System Analysis
Tůma, Jakub ; Merunka, Vojtěch (advisor) ; Toman, Prokop (referee)
This doctoral dissertation thesis has impact to holistically development extension of information systems. Thesis has impact to analytical models and its transformation methods.
This thesis is focused on models Business Process Modeling Notation (BPMN) and Business Object Relational Modeling (BORM). Model BPMN is developed since 2000. Model BORM is developed since 1993 and it is older. The thesis general target was extension of holistically development of information systems. The main target was to bridge the gap between BPMN and BORM models.
This thesis was inspired by Finite State Machine (FSM). The state of the art describes approaches to models transformation. In the analytical part the mathematical formula are used to describe transformation. This part is used to base for the implementation part. The implementation part contains transformation algorithm its description and verification on the case studies. Impact of developed transformation method is validated on the comparison with the other approaches.
The targets were aimed and documented automated transformation calculus. The impact of automated BPMN and BORM models connection using transformation method. The result is method of automated transformation from BPMN model to BORM model using algorithm. The transformation method is based on the Mealy automaton.
|
|
Conversations with Jindřiška Křivánková
Fröhlichová, Marie ; SOPROVÁ, Jana (advisor) ; HALAŠ, Adam (referee)
The aim of the thesis is to describe the principles of creativity of Jindřiška Křivánková, senior professional and a highly experienced theatre performer; and confront her way of thinking and creativity with my own artistic view and my skills gained during my time of study at HAMU. Thereafter, the thesis will first elaborate on her theatre development, from the beginning of her carrier until now. Further it will addresses the major aspects and circumstances that led to her prospering in the field. It also examines the influence of particular personalities that helped her to develop her distinct views on theatre. A further discussion on the various aspects of artistic creation and creative process in a mutual confrontation of the two of us, in which we touch not only broad general issues concerning the culture and theatre, but also the special approaches towards it.
|
guest ::
