|
Influence of meadow management on the migration behavior of selected species of butterflies
Bubová, Terezie ; Langrová, Iva (advisor) ; Farkač, Jan (referee)
Migrations are the key process and one of the basic biological features, which allow survival of endangered species in fragmented landscape. In the last decades, agriculture intensification, industry and urbanization caused that number of natural butterfly habitats has significantly decreased. The localities originally suitable for butterflies are currnetly converted to farmland or building plots. This PhD thesis aimed to find a compromise solution of meadow management, which should allow a commercial use and concurrently do not jeopardize the continued existence of endangered or threatened species. The main idea of this study was in the intentional emigration causing in the middle of flight period, which should lead into resettlement of the population to another (potentially more suitable) locality. Possibility of aimed manipulation with butterfly emigrations would be considered as a major breakthrough in their protection.
The investigated species Phengaris nausithous (Bergsträsser, 1779) and Phengaris teleius (Bergsträsser, 1779) are both considered to be flagship species for protection of European butterflies at open meadows. This study is based on research, which was carried out in 2013-2015 at 17 patch in localities Dolní Labe, Czech Republic. In above mentioned years, one selected meadow was mowed in the middle of flight season and the emigrations were then monitored using mark-release-recapture method. Results of population and migration characteristics were calculated in MARK 8.1 software. Subsequently, the effect of mowing on emigration (comparison of emigrations from the meadow before and after mowing) was evaluated using Statistica 13.
The hypotheses of this study were based on the assumption, that the loss of resources after well-timed mowing should increase the activity of adult butterflies. During the monitoring, number of emigrations was increased only in flight season 2015. Unfortunately, the statistical evaluation did not show significant effect of mowing on migrations. On the other hand, the hypothesis dealing with colonization of nearest meadows was confirmed.
Effect of intentional emigration caused by management interventions was unfortunately not proved. However, we found out, that even though the population at one mowed meadow decreased clearly, the metapopulation size at the locality remained more or less stable.
At investigated (mowed) meadow, there was observed a sharp decline of P. nausithous abundance. On the other hand, P. teleius population was only slightly reduced. It is therefore conceivable, that P. teleius are not as susceptible to innapropriate term of mowing. The results obtained in our research conclusively displayed no possible positive effect of mowing in the middle of flight season and a necessity of suitable management maintenance at localities inhabited by Phengaris butterflies.
|
|
Comparison of the Views and Attitudes of Pupils at Secondary Vocational Schools in the Field of Substance Abuse
Mazánková, Michaela ; Jirsáková, Jitka (advisor) ; Miroslava, Miroslava (referee)
Bachelor thesis entitled Comparison of the views and attitudes of pupils at secondary vocational schools in the field of substance abuse deals with a comparison of opinions and attitudes of pupils at secondary schools and vocational schools Obchodní akademie a Hotelová škola Havlíčkův Brod. The first part is devoted to general characteristics of risky behavior, causes of its origin, different types and prevention of risk behaviors . Analytical part is devoted to evaluation of the questionnaire and the results are compared opinions and attitudes of students of graduation schools and vocational schools, and point to the simultaneous occurrence of risk behavior studied in high school. Based on data evaluation are at the end of the work proposed specific preventive measures specifically for students of graduation schools and vocational schools.
|
|
Automatic system for gauge blocks calibration optimized for legal length metrology
Buchta, Zdeněk ; Šarbort, Martin ; Čížek, Martin ; Hucl, Václav ; Řeřucha, Šimon ; Pikálek, Tomáš ; Dvořáčková, Š. ; Dvořáček, F. ; Kůr, J. ; Konečný, P. ; Lazar, Josef ; Číp, Ondřej
This paper presents a contactless system for automatic and contactless gauge blocks calibration based on combination of laser interferometry and low-coherence interferometry. In the presented system, the contactless measurement of the absolute gauge block length is done as a single-step operation without any change in optical setup during the measurement. The optical setup is combined with compact gauge block changer with capacity 126 gauge blocks, which makes the resulting system fully automatic. \nThe paper also presents in detail a set of optimization steps which have been done in order to transform the original experimental setup into the automatic system which meets legal length metrology requirements. To prove the measurement traceability, we conducted a set of gauge block length measurement comparing data from the optimized system and the established reference system and TESA–UPC operated in Czech Metrology Institute laboratory.
|
|
Comparing the Price of a Transportation Structure and the Actual Costs Incurred in Various Stages of Construction
Nezbeda, Jiří ; Zímová, Štěpánka (referee) ; Kosová, Jaroslava (advisor)
This diploma thesis deals with the calculation of the cost of the building work in order to create the price, which at the stage of the contract becomes a selling price, and the costs are fixed as a budget. The subject of this work is to monitor the development of costs in time so that the cost does not exceed the budget and the construction did not get into the negative result. Then set the price by its own methods (item budget, calculation according to budget indicators) and compare the prices and costs thus obtained from different phases of construction between each other and determine the differences. In this work is monitored and compared the cost of a construction contract and its costs in the construction stages. In the practical part,is used the method of direct comparison of cost and price values over time, in the form of different outputs from the controlling program and outputs from compiled item budget and the calculation of the construction. Analyzing the differences between these costs and their evolution over time by more detailed examination of item budgets and cost calculations, they determine the origin of these deviations. In conclusion, is proposed measures for a particular transport structure whitch was handled by the author as"master and co-ordinator of the construction".
|
|
The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation
Machová, Petra ; Kosová, Jaroslava (referee) ; Čech, Josef (advisor)
The topic of the diploma thesis „The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation “ is a draft and appraisal of four variants of thermal insulation of the building. The thesis deals with the assessment of the current proposal for apartment building envelopes along with proposing alternative plans with emphasis on reducing heating costs. The first section describes the types of buildings according to heating demand and a list of different variants of thermal insulation materials. The second part is devoted to a specific apartment building in the Ústí nad Labem for which there are designed in four variants of insulation. The work includes thermal assessment in original condition and the assessment of new condition modified by adding thermal insulation. Through research will bedetermined price of implementation of proposed insulation options together with the costs of operation of the apartment building. In conclusion, the diploma thesis evaluates the payback period of insulation.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Simulace a protiřetězce pro efektivní práci s konečnými automaty
Holík, Lukáš ; Černá, Ivana (referee) ; Jančar, Petr (referee) ; Vojnar, Tomáš (advisor)
Cílem této práce je vývoj technik umožňujících praktické využití nedeterministických konečných automatů, zejména nedeterministických stromových automatů. Jde zvláště o techniky pro redukci velikosti a testování jazykové inkluze, jež hrají zásadní roli v mnoha oblastech aplikace konečných automatů. V oblasti redukce velikosti vycházíme z dobře známých metod pro slovní automaty které jsou založeny na relacích simulace. Navrhli jsme efektivní algoritmy pro výpočet stromových variant simulačních relací a identifikovali jsme nový typ relace založený na kombinaci takzvaných horních a dolních simulací nad stromovými automaty. Tyto kombinované relace jsou zvláště vhodné pro redukci velikosti automatů slučováním stavů. Navržený princip kombinace relací simulace je relevantní i pro slovní automaty. Náš přínos v oblasti testování jazykové inkluze je dvojí. Nejprve jsme zobecnili na stromové automaty takzvané protiřetězcové algoritmy, které byly původně navrženy pro slovními automaty. Dále se nám podařilo použitím simulačních relací výrazně zefektivnit protiřetězcové algoritmy pro testování jazykové inkluze jak pro slovní, tak pro stromové automaty. Relevanci našich technik pro praxi jsme demonstrovali jejich nasazením v rámci regulárního stromového model checkingu, což je verifikační metoda založená na stromových automatech. Použití našich algoritmů zde vedlo k výraznému zrychlení a zvětšení škálovatelnosti celé metody. Základní myšlenky našich algoritmů pro redukci velikosti automatů a testování jazykové inkluze jsou aplikovatelné i na jiné typy automatů. Příkladem jsou naše redukční techniky pro alternující Büchiho automaty prezentované v poslední části práce.
|
|
On-line Data Analysis Based on Visual Codebooks
Beran, Vítězslav ; Honec, Jozef (referee) ; Sojka, Eduard (referee) ; Zemčík, Pavel (advisor)
Práce představuje novou adaptabilní metodu pro on-line vyhledávání videa v reálném čase pomocí vizuálních slovníků. Nová metoda se zaměřuje na nízkou výpočetní náročnost a přesnost vyhledání při on-line použití. Metoda vychází z technik využitých u statických vizuálních slovníků. Tyto běžné techniky jsou upraveny tak, aby byly schopné se adaptovat na proměnlivá data. Postupy, které toto u nové metody řeší, jsou - dynamická inverzní frekvence dokumentů, adaptabilní vizuální slovník a proměnlivý invertovaný index. Navržený postup byl vyhodnocen na úloze vyhledávání videa a prezentované výsledky ukazují, jaké vlastnosti má adaptabilní metoda ve srovnání se statickým přístupem. Nová adaptabilní metoda je založena na konceptu plovoucího okna, který definuje, jakým způsobem se vybírají data pro adaptaci a ke zpracování. Společně s konceptem je definován i matematický aparát, který umožňuje vyhodnotit, jak koncept nejlépe využít pro různé metody zpracování videa. Praktické využití adaptabilní metody je konkrétně u systémů pro zpracování videa, kde se očekává změna v charakteru vizuálních dat nebo tam, kde není předem známo, jakého charakteru vizuální data budou.
|
|
Adolescent overweight and obesity
JINDROVÁ, Kateřina
My bachelor´s thesis deal with obesity of adolescents and problems with overweight. These problems are described in details, and after that divided into specific parts. The main goal of my bachelor´s thesis is to chart problems with obesity and overweight in age group from 15 to 18 (adolescents) and primary describe their eating habits and physical activity. Theoretical part is focused on occurrence of overweight and obesity in the Czech Republic and in the world, causes of its origin, risk factors, classification and diagnosis, types, therapy and prevention. This bachelor´s work dealing with rational diet, describing basic principles of healthy catering and explaining right or wrong foodstuffs. I point mainly on prevention of overweight and obesity by healthy eating and physical activity. Methodical part is processed thanks to quantitative research. Data were gained by questionnaires, which were given to high school students (1st - 3rd grade). The research group contains 150 respondents from different schools in České Budějovice and close neighborhood. Final results are written down primary in graphs with commentary and data charts. In case of right use of qualitative research, there were determined two hypotheses. First hypothesis: Overweight and obesity is more occurred at adolescents with wrong eating habits. Second hypothesis: Overweight and obesity is more occurred at adolescents with low physical activity. For developing exploratory part, there was used quantitative research, which was provided by questionnaires given to students of age from 15 to 18. Entire data were processed by the use of program Microsoft Excel, and its calculations and functions. The answers of respondents were registered into database, and, by using specific excel functions, I was able to report data in determined categories. The research was mainly concentrated on physical activity and eating habits. Final results are put into well-arranged graphs, which are always enriched by comments, eventually completed by data tables, and, subsequently, statistically evaluated. In results, there might be seen two main differences between adolescents with standard weight and adolescents with overweight or obesity problems. One of those is irregularity in eating and wrong eating habits; big difference is also proved in physical activity. Adolescents with obesity or overweight have often irregular food intake, they drink a lot of high caloric beverages such as Coca-Cola, Sprite, Fanta etc., deficient income of fruit, vegetables, legumes, fish, or low physical activity. Only few of obese adolescents is different, because their problem is caused genetically. Adolescents with standard weight eat more regularly, but there are also some special cases, who have similarly wrong eating habits as obese people; however, all of these adolescents have one typical quality regular physical activity. Both hypotheses are confirmed. The results show that obesity is mainly caused by genetic predispositions, but these factors can be positively affected by periodic physical activity or appropriate eating habits. At the end of the thesis, it should be mentioned that it is necessary to be focused on right eating habits and regular physical from the very young age, when the basic customs and habits are assumed. That should include parents' action around their children, as they are usually the first example and they have the biggest influence.It is important to develop knowledge about all kinds of prevention, which are in most cases major in defending against formation of overweight and obesity.
|
|
Dynamics of mouse sperm capacitation and acrosome reaction
Dvořáková-Hortová, Kateřina ; Frolíková, Michaela ; Děd, Lukáš ; Šebková, Nataša
Capacitation followed by the acrosome reaction (AR), is a very complex event of molecular changes, including acrosome matrix rearrangement and actin polymerization, which mammalian sperm must undergo in the female reproductive tract in order to obtain the ability to penetrate and fertilize the egg. CD46 and β1-integrin belong to specific proteins, which are predicted to interact during molecular reorganization of capacitating sperm. The IZUMO1 as the primary fusion protein of the mammalian sperm is also involved in this dynamic network. We investigated the relationship between the Izumo, CD46 and β1 integrin relocation in the sperm head during the capacitation and AR in vitro. We have already successfully monitored by immunofluorescent labelling the dynamics of proteins CD46 and β1-integrin. The changes in the localization of these proteins associated with the AR and their mutual co-localization was observed. The original β1-integrin location in the freshly released epididymal sperm is in the acrosome and it relocates during the AR further through the sperm head compartments into the equatorial segment and over the whole sperm head. Its density over the equatorial segment is decreasing with the extended time of the AR. Also its presence in the perforatorium of the mouse sperm head is very prominent. The pattern for protein CD46 is extremely similar if not identical in both aspects such as compartment localization and time progress during capacitation and AR in vitro. The molecular interaction of CD46 and β1-integrin was investigated using the Proximity Ligation Assay and Super resolution microscopy STED. The data were statistically analysed. The newly obtained results from CD46 and β1-integrin relocation are in correlation with IZUMO1 dynamics and giving a substantial knowledge on the studied protein network rearrangement during capacitation and AR in mouse spermatozoa.
|
guest ::
