|
Nutritional analysis and optimization of breeding of selected species of edible insects under conditions of the Czech Republic with regard to human health
Adámková, Anna ; Kouřimská, Lenka (advisor)
All over the world, the edible insects are considered a highly nutritious food with high protein and fat content. However, the nutritional value of insect is not constant. It can be affected by species, developmental stage, rearing technology or nutrition.
Therefore, this thesis was aimed at obtaining the selected nutritional value of edible insects. Analyses were focused on the determination of the crude protein content, fat content, fatty acid profile and sterols in selected species of edible insects, which can be commonly reared in the Czech Republic. At the same time we also analysed samples of insects reared on the island of Sumatra to evaluate the influence of the climate on the nutritional value. The main aim of the thesis was the determination of optimal breeding conditions, developmental stages and feed rations for obtaining good production of insects with nutritional properties suitable for human nutrition. The analyses showed a high nutritional value of selected insect species, but also confirmed the significant differences in the content of individual nutrients between different species depending on the climate conditions and developmental stage. Comparing the fat and crude protein content in edible insects and other conventional sources of meat it has been found, that the examined insect is similar to beef concerning the fat and crude protein content. The results obtained are the basis for determining the appropriate rearing conditions and developmental stages for obtaining insect with the desired nutritional properties for human nutrition.
|
|
Population genetic analysis of Old Kladruber horse
Vostrá Vydrová, Hana ; Majzlík, Ivan (advisor) ; Karel, Karel (referee)
The Old Kladruber horse, along with the Lipizzaner horse, Andalusian horse and Lusitano horse, is of the original Italo-Spanish type. The Old Kladruber horse is kept in two colour varieties (grey and black). Because the population is closed, there is a concern about the loss of genetic variation. The genetic diversity and population structure were analysed in the Old Kladruber horse breed based on the pedigree information of animals that were registered in the Studbook to identify factors that may have affected the genetic variability of the breed. Pedigree records collected from 1729 to 2013 contained information on 7971 animals that were used in the analyses. The pedigree depth was up to 33 generations, with an average of 15.1 complete generations. The effective number of founders and ancestors contributing to the current genetic pool was 92.69 and 17.16, respectively. The average values of the inbreeding coefficient were as follows: 13% (with a maximum value of 29%) for the reference population (individuals that can currently take part in reproduction, n=612), 11% for the grey variety (with a maximum value of 25%) and 15% for the black variety (with a maximum value of 29%). The proportion of inbred animals was high (99%). The average rate of inbreeding in the reference population was 1%: 0.8% for the grey variety and 1.1% for the black variety, and the respective estimates of the effective population sizes were 52 for the reference population, 62 for the grey variety and 45 for the black variety. The estimated percentage of genetic diversity lost due to non-random mating within subpopulations and the reference population was 1.0, 1.0 and 1.2%, respectively. The total loss of genetic diversity in the reference population, in the grey variety and in the black variety was 11%, 13% and 17%, respectively.
|
|
The Wine Market in the Czech Republic and the Politics of Wine
Vlašicová, Eliška ; Tomšík, Karel (advisor) ; Malý, Michal (referee)
The dissertation thesis is focusing on the wine market in the Czech Republic. The aim is to identify weaknesses in the wine sector in order to formulate recommendations for improving a current situation in the sector. The Common Agricultural Policy of the European Union and the Common Market Organisation for Wine was presented in the theoretical part of the thesis, where also theoretical aspects of a market including supply and demand were described, as well as an agri-food market and its specifics, wine commodity chain, determinants of demand, supply and prices of wine. In the following chapters an analysis of the wine market, especially with emphasis on the production potential of vineyards in the Czech Republic was created, and demand, supply and price of wine including a price transmission in the commodity chain of wine were modelled based on a regression analysis. The significant influence on demand of wine have had previous values of wine consumption and wine prices, substitutes consumptions (prices of substitutes were not a significant factors), household income and salary, a quality of the wine and awards in international competitions. Significant factors of the side of supply including the price of wine grapes, the price of wine, vineyard area, production of wine grapes, some aspects of weather and certain subsidies. A climate change, which is in progress, may result to the expansion of viticulture and winemaking in the Czech Republic and also to a change of varieties in vineyards. Demand has in the commodity chain of wine greater impact than the supply. It can have a negative effect on growers or winemakers. Planting of vines is not sufficient to maintain current levels of a production potential of vineyards in the Czech Republic. The ideal amount of annual planting vines should be about 655 ha. A related issue is financing a vineyards renewal, which is costly. Based on a financial analysis of small and medium-sized wine companies, it was found that these businesses cannot afford the renewal of vineyards from its own resources and will require grant assistance of the state, eventually EU.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Optical low dispersion rezonator as length sensor using optical frequency comb
Pravdová, Lenka ; Hucl, Václav ; Lešundák, Adam ; Lazar, Josef ; Číp, Ondřej
Ultra-high precis measurements are domain of lasers interferometers. An optical resonator measuring method using broad spectrum of radiation of an optical frequency comb was designed and experimentally verified at our workplace. The measuring of a quantity – a distance of resonator mirrors – is provided by its conversion to the value of repetition frequency of the pulse laser with mode-locked optical frequency comb. In this paper the comparison of the absolute scale of the optical resonator with an incremental interferometer scale is introduced. The incremental interferometer is implemented for verification of the optical resonator scale. The double beam incremental interferometer is operating at the wavelength of 633 nm and the measuring mirror with piezo actuator is used as one of its reflectors. It turns out that the major error signal is the reflection of the periodic nonlinearity of the incremental resonator scale. The relative resolution of our method reaches values up to 10-9 while maintaining measuring scale.
|
|
The return on investment associated with construction of a residential building in Brno
Hovorková, Kamila ; Berger, Patrik (referee) ; Cupal, Martin (advisor)
This diploma thesis is focused on return on investment associated with the construction of a residential building in Brno. First, the author finds all costs associated with the construction of a residential building. Subsequently, the residential building will be evaluated according, as a complex and as an individual flats. It will also be based on the prevailing prices of rents calculated yield value of the house. Then the comparative method provides the prevailing price of apartments in the area and find out how much revenue would amount to, if the house is sold off for flats. Finally the resulting values are compared among themselves and determine the best option to deal with new residential building in Brno.
|
|
Comparison of single-family house prices in Nový Jičín and its surroundings in 2015 and 2016
Žemlová, Eva ; Gardášová, Alena (referee) ; Lorencová, Marie (advisor)
The thesis deals comparison of house prices in Nový Jičín and its surroundings in 2015 and 2016. This family house is located in the village Starý Jičín and then for comparison will be moved to the center of Nový Jičín. In given locations we have to determined observed price and market value. In theoretical part is explained basic terminology, the main legislation which was used and methods of valuation of immovable property. The result of this work is getting to know the influences of locations of family house and it´s price. and identify factors that influence these prices.
|
|
Assessing the benefits of reconversion on the value of church building
Strnková, Markéta ; Klika, Pavel (referee) ; Hlavinková, Vítězslava (advisor)
The thesis focus on the reconversion church building in the selected location. At the beginning of the work described church buildings and their influence on the surrounding, the structure of the Roman Catholic Church and the development of church property during the history. This is complemented by theoretical terms and possible methods of valuing cultural monument. The practical part deals with the reconversion church building, specifically the Dominican monastery in Znojmo. Based on an analysis of Znojmo and monastery was suggesting possible use of the monastery. Of these, two variants were selected and were compared. Of these two options, one was chosen as the most suitable option for future use.
|
|
New Methods for Increasing Efficiency and Speed of Functional Verification
Zachariášová, Marcela ; Dohnal, Jan (referee) ; Steininger, Andreas (referee) ; Kotásek, Zdeněk (advisor)
Při vývoji současných číslicových systémů, např. vestavěných systému a počítačového hardware, je nutné hledat postupy, jak zvýšit jejich spolehlivost. Jednou z možností je zvyšování efektivity a rychlosti verifikačních procesů, které se provádějí v raných fázích návrhu. V této dizertační práci se pozornost věnuje verifikačnímu přístupu s názvem funkční verifikace. Je identifikováno několik výzev a problému týkajících se efektivity a rychlosti funkční verifikace a ty jsou následně řešeny v cílech dizertační práce. První cíl se zaměřuje na redukci simulačního času v průběhu verifikace komplexních systémů. Důvodem je, že simulace inherentně paralelního hardwarového systému trvá velmi dlouho v porovnání s během v skutečném hardware. Je proto navrhnuta optimalizační technika, která umisťuje verifikovaný systém do FPGA akcelerátoru, zatím co část verifikačního prostředí stále běží v simulaci. Tímto přemístěním je možné výrazně zredukovat simulační režii. Druhý cíl se zabývá ručně připravovanými verifikačními prostředími, která představují výrazné omezení ve verifikační produktivitě. Tato režie však není nutná, protože většina verifikačních prostředí má velice podobnou strukturu, jelikož využívají komponenty standardních verifikačních metodik. Tyto komponenty se jen upravují s ohledem na verifikovaný systém. Proto druhá optimalizační technika analyzuje popis systému na vyšší úrovni abstrakce a automatizuje tvorbu verifikačních prostředí tím, že je automaticky generuje z tohoto vysoko-úrovňového popisu. Třetí cíl zkoumá, jak je možné docílit úplnost verifikace pomocí inteligentní automatizace. Úplnost verifikace se typicky měří pomocí různých metrik pokrytí a verifikace je ukončena, když je dosažena právě vysoká úroveň pokrytí. Proto je navržena třetí optimalizační technika, která řídí generování vstupů pro verifikovaný systém tak, aby tyto vstupy aktivovali současně co nejvíc bodů pokrytí a aby byla rychlost konvergence k maximálnímu pokrytí co nejvyšší. Jako hlavní optimalizační prostředek se používá genetický algoritmus, který je přizpůsoben pro funkční verifikaci a jeho parametry jsou vyladěny pro tuto doménu. Běží na pozadí verifikačního procesu, analyzuje dosažené pokrytí a na základě toho dynamicky upravuje omezující podmínky pro generátor vstupů. Tyto podmínky jsou reprezentovány pravděpodobnostmi, které určují výběr vhodných hodnot ze vstupní domény. Čtvrtý cíl diskutuje, zda je možné znovu použít vstupy z funkční verifikace pro účely regresního testování a optimalizovat je tak, aby byla rychlost testování co nejvyšší. Ve funkční verifikaci je totiž běžné, že vstupy jsou značně redundantní, jelikož jsou produkovány generátorem. Pro regresní testy ale tato redundance není potřebná a proto může být eliminována. Zároveň je ale nutné dbát na to, aby úroveň pokrytí dosáhnutá optimalizovanou sadou byla stejná, jako u té původní. Čtvrtá optimalizační technika toto reflektuje a opět používá genetický algoritmus jako optimalizační prostředek. Tentokrát ale není integrován do procesu verifikace, ale je použit až po její ukončení. Velmi rychle odstraňuje redundanci z původní sady vstupů a výsledná doba simulace je tak značně optimalizována.
|
|
Trust and Reputation in Distributed Systems
Samek, Jan ; Návrat,, Pavol (referee) ; Šafařík,, Jiří (referee) ; Hanáček, Petr (advisor)
This Ph.D. thesis deals with trust modelling for distributed systems especially to multi-context trust modelling for multi-agent distributed systems. There exists many trust and reputation models but most of them do not dealt with the multi-context property of trust or reputation. Therefore, the main focus of this thesis is on analysis of multi-context trust based models and provides main assumptions for new fully multi-contextual trust model on the bases of them. The main part of this thesis is in providing new formal multi-context trust model which are able to build, update and maintain trust value for different aspects (contexts) of the single entity in the multi-agent system. In our proposal, trust value can be built on the bases of direct interactions or on the bases on recommendations and reputation. Moreover we assume that some context of one agent is not fully independent and on the bases of trust about one of them we are able to infer trust to another's. Main contribution of this new model is increasing the efficiency in agent decision making in terms of optimal partner selection for interactions. Proposed model was verified by implementing prototype of multi-agent system when trust was used for agents' decision making and acting.
|
guest ::
