|
|
Proposal of Waste Elimination in the Production of Stabilizers
Kučera, Roman ; Jozefovic, Peter (referee) ; Videcká, Zdeňka (advisor)
This thesis is trying to solve the elimination of waste and the increase of effectiveness of the packaging process of the stabilizers in the Mubea Stabilizer Bar Systems s.r.o company. The current unsuitable state of the process of packaging is being analysed in this thesis with the help of the techniques and tools of the LEAN methodology. After the subsequent evaluation of the results of the analysis, the suggestion, which should improve and optimize the actual unsuitable state, is being devised.
|
|
|
Production Line Process Optimizing
Vu Truong Quang, Duy ; Drobik,, Martin (referee) ; Videcká, Zdeňka (advisor)
In this bachelor thesis I deal with analysis and optimization of production line processes in the company Otis a.s., which deals with production of elevators and escalators. The thesis contains a detailed analysis of the current state, where the processes are described, when an anticoincident product is detected. Based on the outcomes of detailed analysis and bottleneck detection, a solution will be recommended to reduce the incidence of anticoincident products.
|
|
|
Lean Manufacturing and its Implementation
Kuthanová, Dominika ; Novotná,, Karin (referee) ; Jurová, Marie (advisor)
The diploma thesis deals with the problematics of lean production in a selected company. The analytical part includes the introduction of the company and the analysis of the current state with using lean manufacturing tools to optimize material flows. The thesis is divided into four parts. The first part describes the objectives and methodology, followed by the theoretical basis of the work and analysis of the current state of the company. The final part includes suggestions of possible solutions leading to elimination or improvement of identified problems.
|
|
|
Introduction to Six Sigma Method and its Application for Process Improvements
Joska, Jakub ; Žák, Libor (referee) ; Bednář, Josef (advisor)
First part of the thesis deals with the description of Six sigma method and its most commonly used methodology DMAIC. The second part is a brief introduction of specific practical problem - electroforming. The third part describes the statistical tools used to solve the given task, especially the Pearson's chi-squared test of independence. The last part of the thesis contains a summary of data, calculation itself and data analysis results.
|
|
|
Process Optimization of the Czech Branch of the International Company
Polák, Jiří ; Chlapek, Dušan (advisor) ; Bruckner, Tomáš (referee)
The process management is the main topic of this thesis. In the beginning there is a description of the expressions related to the process management and improving of the company processes. The thesis is mostly oriented on the methodology of the potential of the process improvement. Anyway there are other methods and methodologies described in the thesis because they can be useful in further process improving. The second part is all about processes of small company. This company is introduced to the reader. There is description of the strategic goals and organizational structure. Next chapter describes process areas of the company. The priority and owners are connected to the areas. The chosen areas are described more in details and key activities are defined. The monitoring of the key activities of the most important process area resulted into analysis of the benefits of achieving the target state. In the last part there is description of activities and projects that shall remove the limits for achieving the goal. For all projects there is suggested implementation plan.
|
|
|
Comparing approaches to improving processes in selected banks
Voříšková, Kristýna ; Svobodová, Hana (advisor) ; Černý, Ondřej (referee)
Diploma thesis focuses on individual approaches to increase process efficiency in Czech banks. Target banks are Komerční banka, Česká spořitelna and Raiffeisenbank. Trend of bank services commoditization is forcing banks to reduce products prices and increase quality. The goal of this thesis is to compare approaches of forementioned banks and evaluate them based on pre-set criteria. After the analysis suggestions will be made. The first part diploma thesis explains process management terminology and presents specific theoretical approaches to process enhancing. The second part compares specific projects in three banks and suggests specific improvements. Diploma thesis also confirms the philosophy of continuous process improvement is valid for tertiary sector as well.
|
|
|
Analysis of risks and their solutions in the production process
Daniš, Pavel ; Plášková, Alena (advisor) ; Mejdrech, Vlastimil (referee)
The thesis deals with the analysis of risks and ways of their solutions in the production process. Its main contribution is the design improvement of the production process of air conditioning systems in Lindab s. r. o. The thesis provides a comprehensive overview of the FMEA method with its elements aimed at process improvements, identifications of production risks, their causes, levels of severity, occurrence and detection. It is divided into a theoretical and practical part. The thesis is based on foreign literature and findings from research internship carried out in Lindab s. r. o. during studies at University of Economics, Prague.
|
|
|
Process control improvement
Čupera, Petr ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
The diploma thesis deals with the improvement of non-compliance management processes in the production company supplying the railway industry. The theoretical part explains the basic characteristics and principles of process control. In the practical part, the current state of non-compliance management processes is analyzed from many points of view and potentials for improvement ire identified. Based on identified potentials, specific measures are proposed to improve the current situation and also give the expected benefits to company after the proposed measures have been put in place.
|
|
|
Proces Modeling as a Tool for Process Improving
Střížová, Blanka ; Ševčík, Jiří (referee) ; Juřica, Pavel (advisor)
This thesis engages in process modelling and description of selected business processes which are underway in the department of Economy and Operation of the Czech TV, in Television studio in Brno. The process models are created using the CASE tool Adonis. The theoretical part is focused on clarifying important concepts, methodologies and tools in the process management. In the analytical part, the selected processes are thoroughly described and graphically illustrated. The proposal part of the thesis highlights the improvement of selected business processes and assesses their effectiveness.
|
|
|
Lean Six Sigma and its Utilization in Practice
Pokorná, Pavla ; Zelená, Veronika (advisor) ; Váchová, Lucie (referee)
The aim of this work is a detailed introduction to the theory of Lean six sigma management tool and verify its efficacy in practice on the individual case. Process to be improved in this work is recovery of overdue debts on english market of certain international company. Of the possible tools Lean six sigma methodologies were chosen the most suitable for a particular process and main causes of large amounts of overdue recievables were identified. As the best steps to improve the process were indentified sending statements of account to customers, improve communication quality and appealing for compliance maturity according to the rules of English banking system. With the methodology we achieved improvement on Sigma parametr on the researched process.
|
guest ::
