|
|
Medical center in Prostějov
Kubíček, Jan ; Hobzová, Klára (referee) ; Benešová, Romana (advisor)
The aim of this master´s thesis is to elaborate the project documentation of a new-built medical facilty for building permit, in the cadaster area of Prostějov. The building has six medical offices with facilities, pharmacy with the production of drugs and X-ray equipment. The building is simply-shaped, with two aboveground floors. The vertical loadbearing structures are designed from sand-lime blocks. The building is insulated by a ETICS with ventilated facade with green facade. The horizontal loadbearing structures and the staircase are designed from reinforced cast-in-place prefabricated parts. The concept of flat roof is an extensive green roof. The building is heated by gas condensing boiler. The building uses photovoltaics to produce electricity for save non-renewable resources. The building is ventilated using mechanical ventilation. In the third part, an assessment of water management was performed. The project was processed in ArchiCAD and Lumion.
|
|
|
Garden Centre Tilia
Šnajdárková, Zuzana ; Hobzová, Klára (referee) ; Benešová, Romana (advisor)
The thesis focuses on project documentation for a construction project with the aim to design a garden center with an administrative part that deals with the design of gardens. The building is situated in the outskirts of Nový Jičín. It is partly a one-story and partly a two-story building. The object lays on the slab foundations, vertical structures are made of ceramic blocks. The horizontal structures are made by prestressed Spiroll panels, due to the large spans. The building is covered by a vegetated flat roof. The exterior walls are solved with the ETICS system or with a ventilated facade made of wood or a green facade. On the 1st floor there is commercial area - 2 units intended for the sale of mainly indoor plants, decorations and goods for the home and garden. From both of these units, there is access to the outdoor sales area, where goods of larger dimensions are considered - outdoor trees, shrubs, outdoor plants. There is also a cafe and a florist studio. The florist studio is considering selling cut flowers, bouquets and decorations.In the central part of the 1st floor there is an atrium with a large skylight. The second floor is intended for a design office and a training room - designed for holding evening courses - garden architecture, flower arranging, tree cutting, etc.
|
|
|
Office building
Rousková, Radka ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The aim of this master's thesis is to design a low-energy office building in Lanškroun. There are three parts, documentation for building permission, a concept of HVAC documentation and multi-criteria assessment in SBToolCZ. The SBToolCZ evaluates of 39 standards, which are divided into four groups – environmental, social criteria, economics and management and location. The proposed building is two-storey, the ground floor is partly below ground level and is designed of reinforced concrete. The first floor is made of CLT panels. The building has a green roof. A green facade will be made on three sides of the ground floor. On the ground floor, there are reception, a meeting room, offices, a technical and storage facilities. On the first floor, there are offices with facilities for employees. Energy for heating and domestic hot water is provided by a condensing gas boiler. Ventilation in the building is provided by an air conditioning unit with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden and the green facade. The thesis is processed mainly in the software AutoCAD, MS Word, MS Excel and DEKSOFT.
|
|
|
Kindergarten
Hylišová, Alena ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis project deals with a new kindergarten with a café in the inner town of Humpolec. It is a single-storey building, with a flat vegetation roof and parts of a green façade. The layout of the building is divided into kindergarten and café, designed for parents with children. The kindergarten has classes on its sides with facilities for children and employees, the central part consists of common areas, preparatory meals, warehouses, principal's office, technical rooms, facilities for employees. The load-bearing vertical structural system is masonry, horizontal load-bearing ceiling structures made of prefabricated prestressed panels, ceramic system lintels. The technological equipment of the building includes an air/water heat pump for obtaining thermal energy, an air-conditioning unit with heat recovery to ensure forced ventilation. The project is solved at the level of implementation documentation, with the help of graphic systems ArchiCAD, Artlantis, building physics programs Svoboda software and program Light+.
|
|
|
Office building
Eryshova, Natalia ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of this Master´s Thesis is to create project documentation for office building with nearly zero energy consumption. The topic of the Master´s Thesis is Office Building located in Brno Komárov. Thesis is divided in to 3 main parts. In a first part, constructional solution is proposed. Office building is designed for recruitment agency with capacity of 32 personnel that consists of 3 floors, green roof and green facade. Ground plan of designed building is in rectangular shape. On the first floor there is a reception, offices, registry, small kitchen and staff room. Second floor is similar to the first one but it has a conference room. Third floor is designed as staff room with coffee lounge. In second part of Master Thesis design of building services engineering systems is proposed. Building uses forced ventilation with heat recovery. Heating is provided by two condensing gas boilers. Supply of electric energy is partially ensured by photovoltaic power plant. In addition, rain water is effectively used in this building. In the third part evaluation of six designed compositions of floor with Life Cycle Assessment method is done. Software used to elaborate this Master´s Thesis are following: ArchiCad, DekSoft, GaBi, Excel and Lumion.
|
|
|
Nursing home
Jurajdová, Alžběta ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The content of this diploma thesis is the design of a new boarding nursing home in Dolany. building with two floors and a residential attic. The main entrance to the building is located on the north side. On the first floor there is a spacious common room, two apartments (one belonging to the administrator of the building), technical room, room for maintenance and cleaning, storage, toilets, areas for nursing services and cellars. The second and third floors are accessible by internal stairs and elevators. Both floors have the same accessibility. In each of them there are a total of 7 apartments. the vertical load-bearing structures are made of ceramic masonry with a contact thermal insulation system. The roof structure consists of a gable roof with ceramic roofing. The project documentation was prepared in accordance with valid legal and technical regulations.
|
|
|
Systems of energy efficient buildings
Šlampová, Kateřina ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is systems of energy efficient buildings with a focus on the building envelope. The first theoretical part describes the quantities that we consider when designing the building envelope. The second half of the theoretical part is with reference to the experimental part of the thesis focused on a special type of vertical perimeter structure, namely walls with live vegetation installed from the outside of the structure. The second, practical part of this work, deals with the design of heating and hot water supply for a multifunctional building. The design is elaborated in two variants - heating by means of radiators in the first variant and in the second variant by means of floor heating for residential units of the solved building. The third part define an experiment, which had the task of comparing the measured quantities on two types of vertical perimeter structures, namely a structure with growing greenery from the outside and an identical structure only without a layer of greenery. At the same time, the task was to check the possible influence of the applied greenery on heat losses, and thus the design of the heating system.
|
|
|
Children, Youth and Adult Leisure Centre
Pitis, Dimitrios ; Marek, Jiří (referee) ; Šindlar, Jiljí (advisor) ; Smolka, Radim (advisor)
The topic of this bachelor thesis is the design of a new building of the Leisure center for Children, Youth and Adults. Leisure center is located in Brno in Kralovo Pole on Mojmir’s Square. The building is located in a gap between the two-storey building of the Gymnasium with a gable roof and the five-storey new building of a residential building with a flat roof. The new building fills the whole gap. The plot is slightly sloping towards Košinova Street and is directly connected to the grounds of the Elementary School in Brno, Košinova 22. The overall concept of the design envisages a partial connection of the school with the operation of the leisure center. Thanks to the designed passage, pedestrians can move freely through the garden to Mojmír’s Square. The aim of the proposal is to create a pleasant environment for cultural and other uses with the greatest possible multifunctionality, to suit all groups of visitors. The building has four floors and one underground floor. The underground floor is used for warehouses, technical equipment of the building and changing rooms. On the first floor there is a multipurpose hall, a small café and a leisure center itself. All these parts can work independently of each other thanks to separate entrances. On the second floor there is a bar used for events held in the hall and two classrooms. The whole floor is connected by a corridor with a door. There are classrooms and a living room on the third floor and the fourth floor serves primarily as an access to the generous roof terrace. Flat roofs above the hall and above the fourth floor are designed as extensive green. An interesting facade is a hanging facade consisting of a suspended stainless steel wire mesh, after which a climbing plant will grow Given the world orientation the parthenocissus is a suitable plant for the facade. In summer, its leaves will protect the glass façade from the sun's rays, in autumn the leaves will become intense red to purple and fall in
|
|
|
Dance school Brno
Slawinski, Olena ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor) ; Pěnčík, Jan (advisor)
This bachelor’s thesis is based on the project done in the fourth term of bacelor’s degree. The aim of the project is construction of a dancing school and elaboration of the relevant engineering documentation. The dancing school is to be located at the crossing of Milady Horakove and Prikop Streets, in Brno-Zabrdovice district. The main idea of the project is to incorporate the building into the area. Taking into consideration the architectural peculiarities of the area and the size of the building, it has been decided to divide visually the front of the school into two parts by means of different colouring and texture of the materials. The construction of a multi-storey building is an appropriate and logical solution as it will save the space and serve many purposes. That is why the initial idea of a dancing school only has been altered and as a result a music school and students’ apartments have appeared in the project. The dancing school is to fill the corner gap between existing residential buildings. The dancing school is a five-storey building with an underground parking for the staff and visitors. There is also building engineering services equipment and the boiler room in the basement. The ground floor has a multi-functional hall and a café, a spacious gallery which can be used for various exhibitions, as well as the cloakroom and toilets. The classrooms and dancing rooms are on the first floor in the eastern wing of the building while the headmaster’s office and the staff’s room are in the western wing. The second floor is fully intended for dancing and music practice. There is also a dancing room with all necessary facilities for disabled people. The laying-out of the third and fourth floors is identical and the premises are designed as students’ apartments including study rooms and a launderette.
|
|
|
Corporate headquarters Dlabaja a.s.
Dlabaja, Adam ; Burianová, Lenka (referee) ; Petříček, Tomáš (advisor)
The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.
|
guest ::
