|
|
Bearing diagnosis of electrical motors
Kratochvíl, Lumír ; Janda, Marcel (referee) ; Vítek, Ondřej (advisor)
This work breaks down the individual phenomena and findings that have as a common denominator the emergence of irreversible processes leading to damage to bearings in electrical machinery and equipment. The introduction describes the basic description and division of bearings with the recommended methods of their basic operation. The following chapters then deal with the individual sources of damage, diagnostics of individual damages, or examine in more detail the accompanying phenomena of bearing damage. In the first practical part of the work, damaged bearings are physically analyzed and their diagnostics is performed on an electron microscope. The second part of the work deals with vibrodiagnostics and the use of appropriate methods to determine the condition of the rolling bearing and then the location of the source of vibration at error frequencies.
|
|
| |
|
|
Proactive system maintenance machines in engineering practice
Morcinková, Lenka ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This bachelor thesis concerns the technical diagnostics and maintenance of machine tools. The first part of it deals with this topic theoretically, the practical part focuses on the application of specific measures. Bachelor thesis includes vibrodiagnostic measurement of the lathe, suggestion of the proactive maintenance system and other activities that could help with the development of maintenance management in company SMC Industrial Automation CZ s.r.o.
|
|
|
Predictive machine tools maintenance system with the use of vibrodiagnostics
Semotam, Petr ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
This diploma thesis concerns issues of predictive and condition based maintenance system of machine tools with using a vibrodiagnostics. It studies and researches its impacts through the basic processes of the maintenance system and characterizes the vibration diagnosis as its tool and mean. There is also described a process of putting condition based maintenance into practice in the practical part of the thesis. The development is realized at Siemens Ltd. Brno with all its requirements and aspects such as a maintenance audit which means the decision on the suitability of condition based maintenance within the current maintenance system, technical analysis as a part of introduction of vibration diagnosis and the practical example of acquiring, recording and assessment of measured vibration. Prior to the end the economic evaluation of the planned predictive maintenance system and the design of the general model of development and implementation of the maintenance system into practice are included.
|
|
|
Modern approaches in the maintenance field
Pšenková, Tereza ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This master thesis deals with position of the maintenance in the company structure and with modern management approaches. One of the highest levels of maintenance is the proactive maintenance, which is using the technical diagnostics to find out the causes of failures. The most inportant in case of machines are vibrodiagnostics and thermodiagnostics, which are going to be applied on the motors in company Bosch Diesel s.r.o.
|
|
|
Multiparametric generator diagnostics
Buchtová, Blanka ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
The thesis is focused on multiparametric diagnostic of generators at the Dukovany nuclear power plant. One generator was chosen for the thesis and it was examined especially from the practical point of view. The thesis describes current state of the issue with focus on noise diagnostics, vibrodiagnostics and electrodiagnostics. The emphasis is on the system approach of the solution. In the practical part an experiment is designed, described and evaluated. Attention is paid to the conclusions of the performed vibrodiagnostics and noise diagnostics. Data sets are evaluated separately and the relationship between the two diagnostic methods is analyzed. Furthermore, the data set from electrodiagnostics is evaluated and dependencies of electrical diagnostic quantities on other quantities are described. Trends in electrical diagnostic quantities are also monitored. Conclusions and recommendations are formulated at the end of the thesis. It is stated that using multiparametric diagnostics to assess the status of generators in power plants is still in its beginning and that the conclusions of the submitted thesis will contribute to the developmnet in this area.
|
|
| |
|
|
Measurement and evaluation of laboratory DC drive vibration
Bilý, Michal ; Zuth, Daniel (referee) ; Němec, Zdeněk (advisor)
This thesis encompasses measuring and rating of vibrations in electric machines. The theoretical part begins with a short description of possible causes of vibrations, which is followed by a discussion about what consequences the vibrational effects have on electrical devices. Then there is a description of available vibration sensors. The bigger part is then devoted to analysis of vibratory signal in both time and frequency domains. The practical part is divided into two chapters. The first one describes laboratory demonstration of control drive with DC motor, which is expanded by measurement of vibrations. The second chapter deals with measurement and analysis of said vibrations in the demonstration.
|
|
|
Multiparametric diagnostics of high-speed machine
Bowyer, Matouš ; Harčarík, Matej (referee) ; Jankových, Róbert (advisor)
The goal of the thesis was applying multiparametric diagnostics to determine the state and wear of a high-speed milling machine. In the theoretical section, selected areas of multiparametric diagnostics have been described as well as a significant focus on vibrodiagnostics. The chosen methods for the practical section were incorporated into the group “metrological diagnostics”. Several different types of measurements have been performed on the designed test piece. The measurements were analyzed and lead to these specific results: a drawing of the test piece, a structured methodology for evaluating the test piece, recommendations for diagnostics of the specific machine, and proposals for the future development of the field of metrological diagnostics.
|
|
|
Modification of Company Information System
Pakostová, Petra ; Záděra, David (referee) ; Koch, Miloš (advisor)
The content of this thesis is the analysis of a proposal to improve the company's information system that manufactures and sells diagnostic equipment. The work will include the creation of a new corporate website and electronic shop, without which nowadays is no longer a manufacturing company can do. The practical part will focus on the selection of open-source systems that will be used when creating the website and in creating e-shop. Of the various options will be selected the most suitable for subsequent comparison and implementation.
|
guest ::
