|
|
New requirements of photovoltaic system for family houses
Mička, Marek ; Valenta, Jiří (referee) ; Dostál, Lukáš (advisor)
The bachelor's thesis deals with the requirements for a photovoltaic system in a family house. Its aim is to summarize all important information when selecting a photovoltaic system. The first part of the semester project summarizes all used topologies of photovoltaic systems in family houses. The second part is devoted to the conditions for safe operation, which include normative requirements, design of lightning protection and connection to the distribution system. And the last third part deals with the process of enabling the parallel connection of the PV power plant to the distribution grid, development of project documentation and installation of PV technology.
|
|
|
Reconstruction of a transformer station with a substation for auxiliary systems
Novický, Marek ; Wasserbauer, Vojtěch (referee) ; Jurák, Viktor (advisor)
The master thesis deals with the premises of the Staré Brno heating plant, where there are two 22 / 0,4 kV transformers used to supply the heating plant's auxiliary system. The thesis deals with theoretical areas related to the planned design. After theoretical section is following a detailed description of the recent state of HV and LV substations and transformers. The scope of work is the design of new transformers, HV substations and LV substations, central compensation. At the end of the thesis is discussed the economic side of transformers.
|
|
|
Electrical installation in apartment buildings
Pírek, Ondřej ; Formánek, Marian (referee) ; Doležalová, Jana (advisor)
Bachelor thesis describes wiring system in apartment buildings. Theoretical part deals with legislation, main house conduit, wiring materials, heavy and low current, and also with Smart Homes. In this thesis, there is also an analytical part which is applied to specified building. In this section we have calculation for specific cable, design of wiring materails and calculation of the annual electric energy consumption. Third part includes project with technical report and attachment with drawings.
|
|
|
Design of modular accumulation system
Janek, Ondřej ; Klusáček, Jan (referee) ; Morávek, Jan (advisor)
The bachelor's thesis deals with the theoretical introduction to batteries and the design of a modular storage system. The first three parts focus on the theory, which discusses basic concepts such as electricity accumulators, the distribution of lithium cells with a focus on the most important LiFePO cells and a description of the safety system. The second part deals with the specific design of the system. That is, the design of the electrical diagram, the choice of cell and switchboard or the calculation of the total budget.
|
|
|
Milling machine CNC control
Krejčí, Jan ; Benešl, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
This diploma thesis deals with rebuild of manual drill-mill machine BF20L into CNC mill machine, 3D model of that and eventual control using PLC. All axes are powered by stepper motors, with encoders, connected to control cards and industrial computer from company Beckhoff. For this control is made full switchboard, supplemented by electrical wiring diagram. Program control along with visualization is made in software TwinCAT 3. Drill-mill machine can be controlled manually or automatically by program.
|
|
|
Blackbox with PLC and demonstration task
Frýdl, Lukáš ; Kacz, Peter (referee) ; Štohl, Radek (advisor)
The goal of this bachelor’s thesis was to create a simulation including visualization of a distillation column, with the primary aim to the thermal processes of simple distillation and of distillation with a water stream. Visualization is displayed on the HMI panel, which is placed on the front doors of the switchboard. The switchboard is designed as a blackbox, which means that the knowledge of the inside functionality is unnecessary for the user to work with the device. Both software and hardware test were performed. The functionality of the software was tested using a mixture of water and acetone. On the hardware side tests of inputs and outputs were done.
|
|
|
The technological stage of the lower building of the apartment house in Havlíčkův Brod
Götz, Libor ; Brandtner, Michal (referee) ; Kantová, Radka (advisor)
The content of this Bachelor thesis is preparation of realization of gross substructure of apartment house and row garages project in Havlíčkův Brod. The thesis includes a technical report focused on the given technological stage, construction situation with wider relations of the transport routes, technical drawing of the construction site equipment, scheme of earthworks and concreting, and technological regulations for earthworks and monolithic foundation structures. For these regulations, the control and test plans, machine set proposal, schedule, itemized budget with a bill of quantities, and safety and health protection at work are prepared.
|
|
|
Documentation for construction of new distribution transformer station and cables line HV a LV
Matouš, Milan ; Orságová, Jaroslava (referee) ; Bátora, Branislav (advisor)
The following master thesis is devoted to the design of distribution systems of LV (Low Voltage) and HV (High Voltage) voltage levels. The aim of the thesis is to create a complete project documentation for the construction of a new distribution transformer station (22kV/0.4kV) situated directly in the city of Blansko along with a transformer capable of performance of up to 630kVA. Subsequently a design of cable routes of LV and HV is included in the project documentation. The first part of the thesis introduces the fundamental issues and solutions regarding the design of electrical equipment related to the LV and HV voltage levels. Thereafter it deals with proper legislation, technical regulations and related standards. The second part is dealing with project documentation. More precisely analyzing each step in the process and thoroughly going through individual parts of the project documentation. Other focus of the thesis is software resources and tools which are essential for drawing documentation. Then follows a selection of appropriate electrical equipment and budget evaluation. The major portion of the work is a design of distribution transformer station and cable lines of LV and HV. Including dimensioning of the LV and HV switchboards, earthing system and fuse protection system. The essence of all this work serves as a foundation for complete design documentation.
|
|
|
Electrical installation in family house
Dalecký, Jan ; Červinka, Dalibor (referee) ; Ondrejček, Vladimír (advisor)
In this bachelor's thesis is analyzed electrical installation of family house. It's goal is to summarize information important for designing electrical installation and subsequently create project documentation of electrical installation of three-floor family house. First part of the bachelor's thesis is dedicated to directives and demands for realization of electrical installation, which you need to lead by when creating project documentation and then assembling it in an object. The second part is focused on creating blueprints including lightning protection, low and high current installation, designing and dimensioning switchboards and technical report.
|
|
|
Analysis of the operation of the lattice network Brno - střed
Frechová, Lucie ; Vaculík,, Jan (referee) ; Ptáček, Michal (advisor)
The thesis shows the historical development of the South Moravian electricity system and the development of Brno´s network is discussed in more detail, especially the current form of the network from the outskirts of the city to its historical centre. The lattice network, as a subject of the analysis, is described in terms of the operation and reliability of the power supply. It also informs about the gradual development of the technology applied in the lattice network Brno-střed. The practical part performs the analysis of theoretical data and recorded data with respect to steady-state and faulty-state operation of the lattice network Brno-střed. The theoretical analysis is based on the simulation and calculation of the lattice network model in the software PAS DAISY Bizon and the monitored parameter is the transformers power load. In addition, the analysis of the real data includes the assessment of the difference average phase current values, as well as voltage, between the transformer phases. There is also the evaluation of the energy flow from the low voltage side to the high voltage side of the analysed network.
|
guest ::
