|
|
Overpass bridge across the highway
Černý, Pavel ; Šopík,, Leonard (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.
|
|
|
Prestressed bridge in Velké Pavlovice
Stloukal, Radim ; Růžička, Stanislav (referee) ; Koláček, Jan (advisor)
The subject of this thesis is to design a bridge construction over the river Trkmanka in the municipality Velké Pavlovice. The superstructure is designed as a prestressed one field slab bridge with the length of 16,85m. As a part of this thesis there is enclosed structural analysis calculated accordingly to ČSN EN 1992-1-1. The load effects were calculated by Scia Engineer and compared with manual calculation. The rest of the calculations are done manually and ocassionally compared to engineering software. The construction has been analysed for the ultimate limit state, serviceability limit state and the stress anchors have been designed.
|
|
|
Bridge on a highway
Knotek, Jan ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Subject of this bachelor’s thesis is design of new slab bridge construction over the II/464 road between the villages Příbor and Bílovec. The bridge converts highway D47. Thesis includes three studies. Pre-stressed rectangular cross-section slab with elliptical exterior trim, pre-stressed plate- grinder construction and construction of prefabricated beams and monolithic slab. For next assessment was chosen option no.1. Load effects calculation is solved in SCIA engineer 16.1. Design and assessment of the structure are made according to valid standards and regulations.
|
|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
|
Static analysis of reinforced concrete floor structure of historical building
Nani, Pavel ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The chief objective of my bachelor’s thesis is a design of the reinforced concrete floor structure of a historical building over 1st floor. The historical building was built in 1874. There are three floors in this building and there isn’t any underground floor. The reinforced concrete floor structure consists of the following forms of structure – a ribbed ceiling, a floor slab, a beam, a shell of vault and a staircase. The ribbed ceiling is made from a lost formwork of the VELOX firm. The set reinforced concrete floor structures are according to ČSN EN 1992-1-1.
|
|
|
One span frame bridge
Buk, Petr ; Zich, Miloš (referee) ; Nečas, Radim (advisor)
The subject of this bachelor thesis is design of road bridge across the river. From the developed variants, one was selected. Selected variant deals with one span frame bridge. Construction is made of panel with run-ups from prestressed reinforced concrete. Bridge is designed perpendicular, with span range of 25,0 m. For the calculation of internal forces two computing models (rod and panel model) were made in SCIA Engineer 2018 program. Thesis deals with comparisons of internal forces in rod and panel model and comparison of short-term losses with SCIA Engineer 2018 program. Design and assesment of ultimate limit state and ultimate serviceability state was conducted in accordance with applicable standarts and regulations.
|
|
|
The roofing of amphitheatre in Vizovice
Kuchtová, Ludmila ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The scope of this bachelor’s thesis is to design roofing over a natural amphitheater stage in Vizovice. The structure is designed as a variable structure in verison of both steel and timber. Each solution has a different structural composition. The layout is triangular with width of 18 meters and length of 15 meters. The height of the roofing is considered to be 9 meters.
|
|
| |
|
|
Hall for Metal Production with Administrative Building
Kaňok, Vojtěch ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
|
|
|
Reinforced concrete road bridge
Koumar, Jan ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The subject of this bachelor's thesis is the design of a reinforced concrete road bridge with one span over the river Oskava in the village Unicov. The bridge will convert road II/449 category S 7.5 / 50. Two shape variants of the cross-section were designed, from which a slab with a trapezoidal cross-section and a considered span of the bridge of 14.00 m was selected for the design and assessment of the load-bearing structure. The internal forces from the applied load were calculated on a slab model in SCIA Engineer 18.1 and compared with a manual calculation on a bar model using the method of resistive widths. The load-bearing structure is dimensioned for the ultimate limit state and the serviceability limit state.
|
guest ::
