|
|
The roof structure of a multipurpose hall in Poděbrady
Houška, Daniel ; Puchner,, Josef (referee) ; Šmak, Milan (advisor)
The aim of this the bachelor thesis is a design of the supporting steel structure of the roofing for the multi-purpose sports hall in Poděbrady. Since a wide range of sports will be played in this sports hall, its layout and ground clearance are proposed accordingly. Prefabricated bleachers, which were not the solved in this thesis, will be part of the hall. Supporting facilities for the hall are located in the nearby buildings. It’s a single steel rectangular hall with a cylindrical roof. Curved beams were used as supporting elements. The beams will be filled with rods installed in a perpendicular system. For a structural analysis Sci Engineer 2011.1 was used. Selected elements were assessed by manual calculation.
|
|
|
Appraisal and assessment of development options immovable manufacturing facility open market value
Hanzlovská, Nikola ; Gardášová, Alena (referee) ; Hlavinková, Vítězslava (advisor)
The main objective of this diploma thesis is to determine the usual price for a manufacturing facility, by using valuation methods. A secondary aim was to determine best possible use of the building and the development possibilities, according to the results from valuation. Diploma thesis is divided to theoretical and practical part. In theoretical part are detailed valuation methods divided to two main parts, the valuation by price regulation and the market valuation. In the beginning the pratical part describes the location and property. Furthermore I applied valuation method for manufacturing complex. At the conclusion is recapitulation and analysis of results, where are considered diferences and the usual price is set. The last chapter is devoted to the best use of complex and consideration of development possibilities.
|
|
|
Steel structure of an industrial building
Blaška, Jan ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
The bachelor thesis is about designing the single-aisle industrial hall bearing structure. The width of the hall is 18 meters, the length is 63 meters and height of the holder of a crane track girder is 12,3 meters. There are two trolley cranes in the building. Their carry capacities are 20/5 t and 32/8 tons. The main bearing components are the transversal restrained columns and strut-frame stringers. The purlins are strut-frame. The structure is designed for the district of Blansko.
|
|
|
Analysis of the Valuation Methods for an Industrial Site
Cikánek, Ondřej ; Vala, Vlastimil (referee) ; Hlavinková, Vítězslava (advisor)
The thesis "Analysis of the valuation methods for an industrial site" deals, as the name suggests, with the analysis of the valuation methods for an industrial site. An industrial site will be valued in accordance with the valid valuation rules and then by an open market price. The calculation of the valuation will be divided into the valuation of the building and the appropriate sites. All methods used will be sufficiently analyzed and compared. In common with the valuation process, the main factors affecting the cost of an industrial building and the site will be determined. In the first part of the thesis I will devote the theoretical appraisal, in the second part of the thesis I will devote the practical use of valuation methods.
|
|
|
Botanical greenhouse
Orságová, Martina ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The thesis deals with design and structural analysis of the botanical greenhouse constructed from steel members. Greenhouse is situated in Zlín. Footprint of the building is 20x38m with 15m height. Structure is made from 7 steel trusses connected by hinges to pad foundations with are 6m apart. Trusses are connected via purlins and girts. General stiffness is provided by traversal and longitudinal truss bracings. The object is single nave hall with curved roof. The façade is made from glass rectangles.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Turčanová, Terézia ; Vrbka, Jan (referee) ; Ponešová, Barbora (advisor)
The task of this Bachelor thesis is to create an architectural and urban design of the transfer terminal in Dvur Kralove nad Labem. Therefore in my proposal, I design and integrate the transfer point into an existing built – up area, so it meets the demands of the 21st century passengers, encourages visitors to explore the city and meets daily needs and activities of the local community. Train and bus terminal together with various other services are combined under one roof to create a meeting place. The center of the area is an elevated glazed terminal hall that covers and connects various functions in the separate blocks within it. A distinctive unifying element of the entire terminal is the overlapping roof in the space around the hall and over platforms. The shape of pillars under the roof refers to the character of the industrial zone located nearby and the "lace-shaped" crossing of the ribs under the ceiling creates a specific atmosphere. The shelter over bus stops corresponds with the roof. Simultaneously it fills the interrupted street line on the Ulica 28. rijna street. The project of the area together with its surroundings also includes places for park greenery as well as for living that complement the missing public spaces in this part of town. The scale of objects is chosen with regard to the character of the site and its importance and location within the city, which has about 16 000 inhabitants.
|
|
|
Shopping Center in Ivanovice na Hané
Čech, Martin ; Šmak, Milan (referee) ; Pilgr, Milan (advisor)
Work deals with design of steel structure of shopping center. It is a building with rectangular shape with dimensions 28 x 55 m and a height 11 m and with cylindrical roof with 50 m radius. Main frames are designed with 5,5 m distance and they are made of arc roof truss connected to steel plate columns. Exterior building envelope is made of Kingspan sandwich panels. Roof cladding is designed without purlins and curtain wall is fastened into side rails. Macalloy tension members are used to obtain spatial rigidity of the structure.
|
|
|
Modernization of the complex Vienna Point 3, Brno - gross superstructure
Knotek, Vít ; Liška, Pavel (referee) ; Biely, Boris (advisor)
This bachelor's thesis aims to clearly describe the building technology stage of gross superstructure hall Vienna Point 3 within the modernization of the entire premises of the company. The content of this bachelor thesis is to address supply parts for assembly and its transport from the processing plant to the designate place of hall Vienna Point 3. Furthermore, the equipment of construction zone, efficient technologies, quality control of work, schedule of work and the construction budget. My aim was to design a progress of work in order to take maximum advantage of the steel skeleton, especially the speed of construction.
|
|
|
Steel structure of sport hall
Ceh, Ondřej ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
This thesis contains a design of steel structure of a sport hall placed in the city of Zábřeh na Moravě. The ground dimensions are 29 x 62,5 m, height is 10 m. The steel structure of a roof is based on frames with a span of 29 m and purlins from open cold rolled profiles. A structural material of frames is steel S355 grade, a structural material of purlins is S450 grade. A bolted connection of the frame will be done according to the maximal rigidity and feasibility of the structure.
|
|
|
Steel structure of a hall
Havlíček, Jan ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
The bachelor thesis is about designing two-aisle hall bearing structure. The span of each aisle is 30m and 24m. Length of hall is 60m. The main bearing components are truss girder and transversal restrained columns. Lenght of purlins is 12m. Purlins are strut-frame. The structure is designed for the dictrict of Jihlava.
|
guest ::
