|
|
Rehabilitation centre
Duben, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The main target of the thesis is design of a new building of the rehabilitation center in Havlíčkův Brod. The rehabilitation center consists of three part. The main (middle) part has two above-ground floors and a basement with flat roof and the other two parts have only ground floor with green flat roof. The main middle part contains reception, café, laundry room storage, utility room, manager‘s office and outpatients doctor‘s office. In the left part there are hydrotherapy, ergotherapy, magnetotherapy and electrotherapy. In the right part there are fitness center and physiotherapy rooms. Vertical load-bearing structures are Made of Porotherm ceramic blocks (above-ground floors) and the Hollow concrete blocks filled with C20/25 and reinforcement B500B (basement). Horizontal load-bearing structures are made of the prestressed Spiroll ceiling panels. The building site contains also outdoor car park and garden with pond. The project and visualization were carried out in the ArchiCad and Lumion programme. All structures comply with the valid standards and regulations.
|
|
|
Indoor swimming pool - concrete tank construction
Pőthe, Péter ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The aim of the diploma thesis was to design reinforced concrete construction of the indoor swimming pool and ensure impermeability of the construction, to ensure behavior as concrete tank construction. Static analysis was done by using program Dlubal RFEM 5.12, where interaction of subsoil with construction was taken into account. Slabs around the swimming pool area were divided into expansion section because of temperature changes from glass façade an after that the sealing of expansion gap was solved. Construction system under the swimming was designed and was tested the behavior of walls and slabs. Analysis was done also to considerate of hydration heat. The drawing was done by software CADKON RCD.
|
|
| |
|
|
Motion Detection in Video
Polanský, Petr ; Sochor, Jakub (referee) ; Herout, Adam (advisor)
The objective of this work is evaluate motion detection using Gaussian Mixture Model. When algorithm detects motion, it creates short video capturing this motion and visualizing it properly. Visualization is made by white pixels intensity graph. System is applicable on less busy area when motion is more noticeable. Results of this work shows how surrounding environment and camera position influence detection.
|
|
|
Face detection in image
Pospíšil, Lukáš ; Harabiš, Vratislav (referee) ; Mézl, Martin (advisor)
The main puprose of this paper is to introduce some of algorithms used in face detection in images. This paper focuses on face detection by using a skin-color based segmentation that is computed in three color spectrums (RGB,YCbCr and HSV). This paper also includes software for face detection in pictures and videos.
|
|
|
Industrial Building
Tretyakov, Alexey ; Mládek, Jan (referee) ; Brukner, Bohuslav (advisor)
In this thesis is solved detail design of industrial building. It is a new storage hall and connected to it the two-story office building. Building is located in the production area of factory, on the cadastral area Holice u Olomouce. The purpose of the building is storage and expedition of the products. In areas of an office building is located facilities for staff of hall and office workspace. Handling products in the hall will be performed by a forklift. The building is designed for a capacity of 15 employees. The office building has a load bearing structural system. Walls and ceiling structures are made up of panels of filigree. Foundations, including flooring of the first floor, are constructed from waterproof concrete. The office building is roofed by flat roof. The main supporting structure of the storage hall is designed as precast reinforced concrete frame. Cladding consists of insulating panels. Like in the office building, the hall is roofed by flat roof. Due to anticipate of the differential settlement of the office building and the storage hall parts are separated by a dilatation joint.
|
|
|
Smoke and Fire Detection in Video Sequences
Tomek, Peter ; Štancl, Vít (referee) ; Švub, Miroslav (advisor)
This thesis aims to analyse a videosignal given in input and find segments that contains fire or smoke. The problem is divided into two cases-detection of fire and detection of smoke. The first and main step of analysation is detection of segments by Gaussian mixture model that is trained by Expectation-Maximization algorithm, or shortly EM algorithm. For smoke detection is than used method of optical flow. The final segments are than processed by some morphological methods and determination of their position is made. Finally, the output of algorithm is again a videosignal in which segments that probably contains fire or smoke are highlighted.
|
|
|
Game with Body Movement Control
Crhák, Jaroslav ; Žák, Pavel (referee) ; Hradiš, Michal (advisor)
The work is dedicated to the processing of the human figures captured by the camera and its use for controlling computer games. There are given typical procedures for segmentation of images on the basis of movement and finding signs relating to binary image. Other part describes design of the application using informations about image.
|
|
|
Morphological Operations in Image Processing
Kolouchová, Michaela ; Hradiš, Michal (referee) ; Herout, Adam (advisor)
Mathematical morphology stems from set theory and it makes use of properties of point sets. The first point set is an origin image and the second one (usually smaller) is a structuring element. Morphological image transformations are image to image transformations based on a few elementary set operators. Fundamental morphologic operations are dilation, erosion and hit or miss. Next operations described in this work are opening and closing. Originally morphological operators were used for binary images only, later they were generalized for grey tone and color ones. This work describes the basic morphological image processing methods including their practical usage in image filtering and segmentation.
|
|
|
3D Objects Reconstruction from Image Data
Cír, Filip ; Kršek, Přemysl (referee) ; Španěl, Michal (advisor)
This paper deals with 3D reconstruction of objects from image data. There is describes theoretical basis of the 3D optical scanning. Handheld 3D optical scanner setup is described composed of a single camera and a line laser whose position is fixed with respect to the camera. Set of image markers and a simple real-time detection algorithm are proposed. Detected markers are used to estimate position and orientation of the camera. Finally, laser detection and triangulation of points lying on object surface are discussed.
|
guest ::
