|
|
Reconstruktion of shock absorber test rig
Smejkal, David ; Strecker, Zbyněk (referee) ; Mazůrek, Ivan (advisor)
This bachelor thesis is focused on the reconstruction of shock absorber test rig which is placed in the laboratory of Machine and Industrial Design. The introduction deals with the basic description of particular dampers. There are also analyzed the dismantling and non-dismantling testers that serve for testing of dampers. Several special testers and testing devices are listed in this paper. There is a thorough division and description of dismantling testers. In the following chapters are mentioned various kinds of software used in the testing device for simulation of operating conditions. A special attention has been paid to the analysis of the function of hydraulic servo valve. The last chapter of this part is devoted to the description of the existing tester at UK and the advantages of a hydraulic tester comparing to the mechanical one. In the practical part of my Bachelor work are suggested several reconstruction options of the above mentioned tester. Subsequently the alternations that best meet requirements of simplicity and cost-effectiveness are chosen.
|
|
|
Universal LED Source for testing of the light guide properties
Feilhauer, Jaromír ; Chmela, Ondřej (referee) ; Novák, Lukáš (advisor)
This bachelor thesis deals with the design of the LED source for testing the properties of light guides of car headlights. The thesis mainly includes the theory of the DC - DC converters, their categorization and the basic properties of the individual types of circuits. The design part is focused on the selection of the required chips. The importance of the chip as the basic description, characteristics and calculations of the values associated components are included. Then it follows with the design of the circuit diagram and the printed circuit, software and communication packet development and measurement results of real sample.
|
|
|
Influence of Dynamic Bandwidth Allocation over Optical Network Unit
Sikora, Pavel ; Oujezský, Václav (referee) ; Horváth, Tomáš (advisor)
This thesis deals with DBA algorithms used in XG-PON networks. It describes reference appearance of the DBA algorithm, as well as, three specific DBA algorithms discussed in professional articles. Particularly speaking about GIANT, HYRA and modified Max-Min Fair DBA. The thesis provides description of frames utilized by DBA algorithms in XG-PON networks, specifically XGEM frame and XGTC frames. The thesis also presents a simulation tester of DBA algorithms tested on a virtual XG-PON network. Finally, it contains the results of testing these DBA algorithms with a description.
|
|
|
Methods of testing printed circuit boards
Průša, Tomáš ; Urbanec, Tomáš (referee) ; Raida, Zbyněk (advisor)
ABSTRACT This work describes design of tester for motherboards that uses the PC's called CM-iTC and analysis of input / output pins. There are combinations of inputs / outputs for tested boards and modules focusing on possible errors and their specifications. They include proposals for solutions to detect these errors.
|
|
| |
|
|
Universal LED Source for testing of the light guide properties
Feilhauer, Jaromír ; Chmela, Ondřej (referee) ; Novák, Lukáš (advisor)
This bachelor thesis deals with the design of the LED source for testing the properties of light guides of car headlights. The thesis mainly includes the theory of the DC - DC converters, their categorization and the basic properties of the individual types of circuits. The design part is focused on the selection of the required chips. The importance of the chip as the basic description, characteristics and calculations of the values associated components are included. Then it follows with the design of the circuit diagram and the printed circuit, software and communication packet development and measurement results of real sample.
|
|
|
Cable harness tester
Valenta, Jakub ; Valach, Soběslav (referee) ; Burian, František (advisor)
This semestral paper deals with the issues of testing and requirements examinations for cables and cable harnesses. These terms are defined in the work and the difference in their meaning is described. The work also describes the characteristic features of cables and cable harnesses, explains their importance and focuses in more detail on the variable properties that may change over time or that are dependent on manufacturing errors. The principles and procedures of tests of these properties are covered in the work and are the essence of the subsequent practical part. In this part, the work deals with the design of the measuring circuit prototype for testing of the insulation resistance of cables and their desired continuity in bundles. This design is then physically implemented, the processes of designing and implementing are described in detail and finally its functionality is tested and presented to the reader.
|
|
|
Industrial Tester for Photometric Values of LED diodes Used in Automotive Signal Lighting
Gaži, Dominik ; Froehling, Kenneth (referee) ; Baumgartnerová, Alena (advisor)
V posledních letech zažili světlomety v autech obrovský technický rozvoj, který se podílel na jejich současné složitosti. Aby řidiči i zákazníci byli spokojeni, je využíváno různých technologií pro neustálé dosahování účinnějších a bezpečnějších světelných zdrojů. Společnosti usilují o minimalizaci ztrát ve výrobě ve snaze šetřit životní prostředí a konat ekonomicky. Tato práce se zabývá výzkumem osvětlovací techniky a návrhem jednoduchého a efektivního zařízení pro testovaní chyb LED plošných obvodů ve světlometech, to vše za účelem minimalizace strat. Dalším cílem je výzkum možností konstrukce takového zařízení z technologického hlediska.
|
|
|
Network tester
Haško, Juraj ; Fujdiak, Radek (referee) ; Zeman, Václav (advisor)
The thesis deals with data network testing. The aim of the thesis is to design a methodology for the comprehensive measurement of network transmission parameters and design of the tester concept and realisation by helping to extend the existing JMeter program.
|
|
| |
guest ::
