|
|
Determination of masonry modulus of elasticity in the direction of bed joints
Kuchař, Martin ; Klusáček, Ladislav (referee) ; Terzijski, Ivailo (advisor)
The determination of strain properties of masonry in the direction parallel to bed joints is a fundamental pre-requisite for designing structures, where masonry is subjected to horizontal stresses (e. g. strengthening with prestressing). The diploma thesis summarized techniques of determination of masonry modulus of elasticity presented in available literature. The goal is to suggest suitable methodology of determination of masonry modulus in direction parallel to the bed joints. In the practical part of the diploma thesis is that methodology verified by experimental test and results of tests are analyzed and discussed.
|
|
| |
|
|
Frost susceptibility of soils and waste materials to pavement subgrade
Sokolová, Veronika ; Mondschein,, Petr (referee) ; Stehlík, Dušan (advisor)
Destruction of road constructions due to the frost is in locations with temperatures under the zero a problem which leads to permanent deformation. The theoretical part of this thesis deals with the freezing process of the pavement and its subgrade. It presents methods for determining the rate of frost susceptibility in both the Czech Republic and abroad. Describes the materials used in the subgrade of roads and their suitability in terms of frost susceptibility. The thesis closely examines the fly-ashes, their properties and possibilities of using in the construction industry. The practical part of the thesis focuses on the performance of direct laboratory frost heave tests, immediate bearing index tests, California bearing ratio tests and cyclic load triaxial tests to determine the modulus of elasticity. Tests are carried out on the soil, the soil mixtures with certain percentages of fly ash from different sources at the same soil treated with lime. Then the results are compared and dependence between the measured characteristics of materials is created.
|
|
|
Survey and Diagnostics of Reinforced Concrete Structure
Haloun, Jan ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The first part of this diploma thesis is about late and current methods used in Engineering surveys. The theoretical part is focused on description of individual testing methods and their evaluation based on relevant standarts. Detailed description of diagnostic methods is dependent on methods used in a practical part. The practical part is focused on defining of material characteristics of used materials and way of reinforcing of reinforced concrete elements. Based on those defined pieces of information the static recalculation of girder and pile was made.
|
|
|
Development and testing of high performance concrete for subtle structures
Myšičková, Lucie ; Cikrle, Petr (referee) ; Bílek, Vlastimil (advisor)
Thesis describes properties of HPC compared to concretes of normal and high strength. It further describes the input materials and the procedure for designing the composition of the mixture. It gives examples of already completed structures made of HPC. The experimental part describes the optimization of concrete mix and production of specimens. In the end results of testing the properties of the developed mixes from tests of dynamic and static modulus of elasticity, compressive strength and tensile strength by bending are described.
|
|
|
Survey and Diagnostics of Reinforced Concrete Structure
Richterová, Dominika ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The main theme of this diploma thesis is a building survey and diagnostics of a reinforced concrete construction. In the first, theoretical part the focus lies on a description of each method for testing constructions and their evaluation. The second, practical part focuses mainly on finding of material characteristics and reinforcement of particular parts of the construction. On basis of obtained information, the final part of this paper focuses on static assessment of chosen parts of the construction.
|
|
|
Study of influence of input parameters for the numerical modeling of the compression test
Polách, Marek ; Keršner, Zbyněk (referee) ; Lehký, David (advisor)
The thesis analyses influence of input parametres of the 3D Non Linear Cementitious 2 material model for the numerical modeling of compression test performed in ATENA 2D and ATENA 3D software. The aim is to identify parametres with considerable influence and subsequently replicate the load-deflection curve obtained from laboratory compression test by numerical modeling. The effects of selected model and material model settings are studied on three kind of models in total. As tools for analyzing the effects, deterministic and statistic sensitivity analyses were chosen. Parametres with significant influence will be highlighted and added to the group of parametres obtained from numerical modeling of three-point bending test. This will create a set of parametres of considerable influence when it comes to modeling advanced structures with different types of stresses.
|
|
|
Diagnostics of the bridge structure
Wünsche, Dominik ; Cikrle, Petr (referee) ; Kocáb, Dalibor (advisor)
The diploma thesis deals with the issue of bridge strustures, especially their diagnostics and evaluation. The work consists of two parts, theoretical and practical. The theoretical part deals with the basic description and division of bridge structures, brigde inspections and test methods, especially those that were used in the thesis during bridge inspections. The practical part includes a visual inspection of two bridges, their description, detection of faults and defects and their documentation. In the practical part, the basic maretial characteristics of concrete bridges were determined, the condition of structures was assessed and a proposal for the elimination of failures and defects was developed. In the end, the work deals with the evaluation of both bridges.
|
|
|
Development of wood-based board materials applying thermal modification process
Buriánek, Vlastimil ; Pipíška,, Tomáš (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals deals with the effectiveness of polyurethane and phenol-resorcinol-formaldehyde adhesives when applied in bonded joints of thermally treated sheet materials. The thermal resistance of commercially used adhesives was analysed as part of a research activity. Furthermore, the changes in the properties of wood materials after heat treatment were described. In the practical part, the effectiveness of the used adhesives on densified birch plywood was verified with respect to the shear strength of the resulting composite. Based on the results obtained, it was proceeded to verify the effectiveness of densification on spruce plywood.
|
|
|
Innovative wood-based materials
Buriánek, Vlastimil ; Brožovský, Jiří (referee) ; Vaněrek, Jan (advisor)
This bachelor’s thesis deals with the issue of optimizing the modification process for plywood boards. Optimization consists mainly in evaluating different densification methods with different parameters of plasticization and stabilization. Psychical parameters (bulk density, swelling, water absorption) and strength parameters (bending strength, modulus of elasticity) of modified plates were chosen for the evaluation parameters. The practical part involved the verification of two thickening treatments on birch plywood.
|
guest ::
