|
|
Phase separation in the system of aminoclay-biopolymer
Plotěná, Michaela ; Pekař, Miloslav (referee) ; Mravec, Filip (advisor)
The aim of this diploma thesis was to study the structure and to evaluate the properties of the hydrogel prepared by the interaction of the aminolclay with the biopolymer. Representatives of the biopolymers were selected from low to medium molecular weight sodium hyaluronate and sodium polystyrenesulfonate. On the basis of the experiments carried out, it was found that phase separation takes place only when the aminolclay interacts with medium molecular weight hyaluronan (MMW). In the experimental part, analyzes of this sample were carried out in order to determine the formation of phase-separated hydrogel by influencing the solution by ionic strength, investigation of hydrogel extinction in various organic solvents, stability of hydrogel under extreme temperature conditions, the effect of storage on its degradation, etc. Viscoelastic properties were experimentally proven by rheology and thermal analysis detected binding water. Inhibition of microorganisms was confirmed by antibacterial diffusion assays. All experiments were carried out for the use of the Aj-HyA hydrogel (MMW) in the field of medical applications, specifically for the modern method of wet wound healing of the skin.
|
|
|
Polysaccharide gels in medical applications
Svitačová, Denisa ; Kadlec, Martin (referee) ; Venerová, Tereza (advisor)
This bachelor thesis deals with the performance of hydrogels containing polysaccharides, their characterization and reproducibility of the preparation of these gels, which is described in the literature. Based on the research, suitable polysaccharides, namely guar and gellan gum, were selected. Subsequently, an article was selected, the procedure of which was reproduced. Calcium chloride was used as a crosslink agent in the mixture of guar gum and gellan solution. Problems appear in the reproducibility of the article which did not allow the exact repetition of the hydrogel preparation procedure described in the article. Based on the findings, an optimized range of mixtures with various other gelling agents was developed. The individual prepared materials were suitably characterized by rheological tests. Specifically, amplitude tests, the results of which proved the formation of a three-dimensional network in their structure, and thus the formation of hydrogels. Frequency tests were used to determine their mechanical properties.
|
|
|
Transport properties of humic gels
Sárová, Michaela ; Pospíšilová, Ľubica (referee) ; Klučáková, Martina (advisor)
This bachelor’s thesis is focused on study of transport properties of humic gels. For research of these properties was used diffusion method of organic dyes in diffusion cells which is based on spectrophotometric monitoring of concentration changes depending on time. Dyes used in the experiment were specifically methylene blue and rhodamine 6G and diffusion experiments were performed on an agarose hydrogel without the addition of humic acid, with the addition of unmethylated humic acid and then with the addition of methylated humic acid. The aim of this thesis was to investigate the effects of interactions between diffusing dye and the particular type of gel to the resultant effective diffusion coefficient of dye. It has been found that the presence of humic acid in agarose hydrogel greatly influences the transport of dyes.
|
|
|
Hyaluronan-CTAT hydrogels
Velcer, Tomáš ; Venerová, Tereza (referee) ; Pekař, Miloslav (advisor)
This thesis studies the properties and behaviour of phase-separated hydrogels prepared by interaction of hyaluronan with oppositely charged surfactants. Three representatives of surfactants, namely cetyltrimethylammonium bromide, chloride and p-toluensulfonate (CTAB, CTAC, CTAT), were selected for comparison. Using the method of rheology, the fact that the system of Hya-CTAT forms the most rigid hydrogels has been proved. Higher molecular weight of hyaluronan has also direct influence on the volume and stiffness of the newly formed hydrogels. Preparation methods were compared as well. Mixing the stock solutions of entry components appeard to be the most suitable. Small-angle X-ray scattering was used for determination of shape and size of surfactant's micelles, concluding that it has no effect on the volume of formed gels. The results of this study indicate that given gels are to a certain extent competitive and incorporation of hyaluronan into their structure is desirable with respect to its biological activity. This offers a potential usage of these substances in the field of medical applications.
|
|
|
Study of barrier and transport properties of polyelectrolytes using diffusion techniques in hydrogels
Valentová, Kristýna ; Kalina, Michal (referee) ; Smilek, Jiří (advisor)
This diploma thesis was focused on study of barrier and transport properties of selected polyelectrolytes in hydrogel matrices by using diffusion techniques. The study of these properties was performed in horizontal diffusion cells where is observed the change in diffusion probe concentration over time. Diffusion experiments were performed on an agarose hydrogel with the addition of alginate, hyaluronic acid, polystyrene sulfonate, humic acids and as a model probe rhodamine 6G was used. Important parts of this thesis are also the methods which characterize the substances and hydrogel matrices such as rheology and potentiometric titration. The main aim of this diploma thesis was to investigate the effect of interactions between passing model dye (rhodamine 6G) and the appropriate gel (agarose + polyelectrolyte) on the fundamental diffusion parameters (effective diffusion coefficient, lag time, etc.).
|
|
|
Adhesion of (Hydro)gel Materials to the Surface – Physico-chemical Description and Biological Concequences
Žibeková, Lucia ; Mravec, Filip (referee) ; Kalina, Michal (advisor)
This Bachelor´s thesis deals with study of adhesion of hydrogels materials to the surface. Three biopolymers were selected for this purpose, one of which is psychically cross-linked (agarose) and two are chemically cross-linked (based on sodium alginate cross-linked with Ca2+ and polyvinyl alcohol cross-linked with borax). In the experimental part of the work, adhesion was first examined by a visual method on an inclined plane. The tilt was at different angles (30°, 45°, 90°) where it was observed whether the hydrogel was able to attach to a solid surface or slip down. The agarose was examined in different concentrations from 0.5 wt% to 4 wt% in both methods. Also, the alginate gel was examined at various concentrations with two different cross-linked agent. However, alginate was only used in the visual method because of its inhomogeneity. In contrast, the PVA gel was examined at 10:1 and 4:1 ratios for the both methods. The second method in the experimental part was the tensile test carried out on the Inova apparatus – hydraulic pulsator, and thus the methodology for the study of physical and chemically cross-linked hydrogels was optimized. With increasing concentration of agarose gels, adhesion strength and work increased as well. For PVA gels, the adhesion work was higher, but the adhesive strength remained approximately the same as for the agarose gels.
|
|
|
Hydrogels made of biopolymers for agricultural and environmental applications
Ondruch, Pavel ; Záhora, Jaroslav (referee) ; Sedláček, Petr (advisor)
This diploma thesis is focused on development and characterization of hydrogel materials for agricultural use. In the experimental section, different methods of preparing these materials were designed and optimized according to previous literature review. In the characterization of resulting materials, the main attention was paid to the kinetics of swelling, to the solubility, the leaching of nitrate and of humic compounds. Thermogravimetric analysis represented another important characterization technique, which provided information about the content and form of water bound in the material. The development of the material aimed mainly at an agricultural application providing the delivery of nutrients to soil and regulation of water content in soil.
|
|
|
Using diffusion techniques in the study of hydrogels
Holubová, Anna ; Žitňan, Michal (referee) ; Mravec, Filip (advisor)
Properties of colloidal systems, especially hydrogels, were studied using the method of fluorescence correlation spectroscopy (FCS). Hydrogels were prepared based on hyaluronan and cationic surfactant CTAB interactions. The proposed hydrophilic fluorescent probe, suitable for the study of phase-separated hydrogels in polymer-surfactant systems, was chosen ATTO 488 due to the suppression of triplet state. As a hydrophobic probe was chosen Nile Red. Individually were examined micellar systems of 10 mM CTAB and 0,5% sodium hyaluronate in water and 0,15 M NaCl in different concentrations of selected fluorescent probes. Subsequently the hydrogel systems were studied. The results showed that the measurement of hydrogels by this method is realizable. Short lifetimes were created by a complex probe and CTAB causing quenching and low levels of diffusion coefficients characterize the viscous environment of study system.
|
|
|
Rheology as a powerful tool for the complex characterization of hydrogels
Kadlec, Martin ; Kráčalík, Milan (referee) ; Smilek, Jiří (advisor)
This diploma thesis investigates the suitability of relaxation tests as a part of complex characterization of hydrogel materials using classical rheology methods. With respect to the current research, creep and three interval thixotropy tests were taken into account. For them, general optimization was done aiming to find an ideal parameter settings. The optimization was performed using physically crosslinked agarose (AG) hydrogel and the tuned tests were also applied to two more samples: hyaluronan (HyA) and polyvinyl alcohol (PVAl) gel. These materials were selected due to their mutually different crosslinking principle. The experiments showed, the AG gel proved to have the best ability to recover after deformation of all studied samples. On the other hand, the HyA gel relaxed the worst. Although the final results of both tests were comparable, the regeneration process itself was different. Hence, the complex relaxation characteristics cannot be described using one of the performed tests alone and both the creep and three interval thixotropy tests have great importance in the scope of complex relaxation behaviour. The obtained results may lead to more precise description of deformation and relaxation, which are frequent phenomena occurring during treatment and application of hydrogel materials.
|
|
| |
guest ::
