|
|
Sound emission directivity model
Zdvyhal, Marian ; Hájek, Roman (referee) ; Hejčík, Jiří (advisor)
This diploma thesis solves creation of a computing model of sound propagation for determination of acoustic pressure level around multiple point sound source with consideration of sound directivity of each source (compresor and fan). Thesis contains neccesary theoretical knowledge for creation of computing model and basics of sound measuring, theoretical computing model, measurement data of real unit and model configuration for real measured values. Computing code of the model in Visual Basic for MS Excel is a part of the thesis.
|
|
|
Propfan engines in civil aviation transportation
Polák, Andrej ; Klement, Josef (referee) ; Šplíchal, Miroslav (advisor)
Bachelor thesis is written in the search form and discusses propfan aircraft engines. After introducing the concept itself, the first part deals with the principle functioning of engines and propulsion efficiency. The second part briefly describes the construction of these engines with a focus on specific parts of propfan engines differentiating concept from other aircraft engines. Then summarizes the features of these engines, describes their advantages and disadvantages and the possibilities of eliminating disadvantages. Finally briefly describes the history of the development of propfan engines.
|
|
|
Intelligent Test Procedures Low-Tension Traction Drives with Induction Motors
Nesvadba, Martin ; Ondrůšek, Čestmír (referee) ; Novák, Jaroslav (referee) ; Duroň,, Jiří (referee) ; Singule, Vladislav (advisor)
This dissertation thesis is focused on the problem of the noise measurement and construction of the noise test station what was also interest of my employer - company Kollmorgen,sr.o. This testing station should be located directly in the assembly line with target of the noise motor s identification. On base of these measured values and implemented intelligent testing procedures, we should be able to identify real root cause of the noise The noise of electrical machines is actual issue. There is a big pressure for low-noise driving system construction created by many end-customers. We can achieve these requirements with 100% quality of all parts of current product, implementation of noise testing station and also with design optimization of the current product. Basic testing procedures of induction motors were showed in first part of this work (chapter 4.1.). These procedures are able to provide good picture of the motor condition. For the motor noise measurements was constructed a workplace including noise box with acoustical absorption up to 30dB what allowed the workplace implementation directly into the motor assembly line. Testing techniques and frequency analysis procedures were implemented sequentially with the target of the test evaluation improvement. After the detailed analyze of the motor noise root causes was performed check of the current motor design with respect of the “noiselessness” motor construction principles. As next step was created the motor prototype with optimized construction with target of the motor noise reduction. This optimized motor was tested and compared with standard motor design.
|
|
|
Electric and Hybrid Vehicles Analysis
Slaběňák, Patrik ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Nowadays, oil resources start to decrease, therefore it is necessary to think about alternative sources of energy. The result of this semester project is a basic overview of the current development of electric and hybrid cars, with potential application in normal operation and the proximity of their main characteristics, such as mileage, price and service when traveling. The energy required to operate the electric stored in batteries are recharged using the power stations, which is also devoted part of the work. The thesis focuses on the design and calculation of power consumption for a defined route of four-wheel electric wheelchair. The conclusion of the thesis deals with the future development of hybrid and electric vehicles, and with the expected trends in the field of power electronics and motors and with the propagation of hybrid vehicles to the customers.
|
|
|
Study of bearing noise regarding accuracy of machining
Studýnka, Pavel ; Sabo, Karol (referee) ; Klapka, Milan (advisor)
This bachalor thesis deals with connection between the quality of surface of raceways of a bearing and vibrations in operation. This thesis describes basic geometrical parameters of a bearing that have main influence on its resulting quality and vibrations. It presents methods to evaluate the quality of the raceways surfaces and their connection between them. As a part of the thesis is an experiment, which should prove, what is the connection between the measuring of quality of the surface of raceways and measuring the vibrations of bearings during the process, by the way used in the company KOYO Olomouc. The quality of raceways is evaluated on a measuring device MUK-F 300 and vibrations on IL 100R/2000.
|
|
|
Propfan engines in civil aviation transportation
Polák, Andrej ; Klement, Josef (referee) ; Šplíchal, Miroslav (advisor)
Bachelor thesis is written in the search form and discusses propfan aircraft engines. After introducing the concept itself, the first part deals with the principle functioning of engines and propulsion efficiency. The second part briefly describes the construction of these engines with a focus on specific parts of propfan engines differentiating concept from other aircraft engines. Then summarizes the features of these engines, describes their advantages and disadvantages and the possibilities of eliminating disadvantages. Finally briefly describes the history of the development of propfan engines.
|
guest ::
