|
|
Rotor fault diagnosis of induction motors
Bednařík, Václav ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This bachelor thesis focus on the faults of induction motors. In general terms to mechanical and electirc faults and their influence on induction motor. Further on the tests, that are conducted on induction motors to detect faults and states that precede them. Main part is devoted to rotor eccentricity and broken rotor bars. Eccentricity is solved within theoretical analysis and measurements on free damaged motors. As well as broken rotor bars, which are supplemented by measurements on three damaged rotors. There are two types of eccentricity, static and dynamic. Faults of broken rotor bars is solved in terms of postion of broken rotor bars and their number.
|
|
|
Fault Diagnosis of electrical machines using vibrations
Čech, Roman ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The task of this thesis is to introduce the problems of vibrafon sources in asynchronous motor and their effects and risks to the engine. We will classify the sources of vibration, we will focus for the defects of bearings and for dynamic and static eccentricity. The thesis includes vibration measurement for asynchronous motor, analysis and evaluation of bearings defects and eccentricities.
|
|
|
Three-cylinder inline diesel engine with an eccentric crank for commercial vehicles
Domský, Viktor ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The goal is to investigate the influence of eccentricity on the force between the piston and the cylinder liner and the influence on balancing of the crank mechanism. For a selected eccentricity suggest a balancing method and perform stress analysis of crankshaft considering torsional vibration. Eccentricity is chosen by the ratio of centric and eccentric mechanism of friction work. The paper shows the effect of eccentricity on the selected kinematics values. Stress analysis is done in the software ANSYS. Using selected eccentricity the friction work was reduced by 10 %.
|
|
| |
|
|
The five-cylinder inline diesel engine with eccentric crank mechanism
Süttő, Daniel ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is to find out the influence of eccentricity of crank mechanism on the duration of the force between the piston and the cylinder liner. At the same time I wanted to find out its influence on the balance of the whole system. It is important to design the balance for the selected value of the eccentricity and subsequently put through the crank shaft to stress analysis with torsional vibrations. I got so interested in this problem that in addition to the whole topic I designed a torsional vibration damper.
|
|
|
Plain Bearings for CI Tractor Engine
Petr, David ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the hydrodynamic plain bearings tractor diesel engine. The first part is closer acquainted with the hydrodynamic bearing, its principles and materials used. The next part work deals with the multibody system adams-engine. The main part of this work is to model the crank mechanism and its storage in hydrodynamic bearings in the MBS program and the subsequent simulation under different operating conditions.
|
|
|
Static provision of castle in city Drnovice
Caloň, Radim ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The goal of the project is a static provision design of Drnovice castle. This castle (today a municipal office and a restaurant) is violated by vertical cracks. There is a significant horizontal displacement vector. That’s why horizontal prestress redevelopment (using prestressed cables) was chosen. A drawing documentation is an integral part of the project.
|
|
|
The influence of eccentricity upon the radial forces in an induction motor
Formánek, Jakub ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of this master thesis is to get familiar with the influence of radial forces in the induction machine. Induction motor is one of the most commonly used and most extended type of machine, therefore it is useful to detect the intensity of theese forces and their influence at operation of the machine. In this work ,radial forces are computed by the software simulation in ANSYS Maxwell. Models are created with help of module Rmxprt and finite elements method.These models are based on real induction motors with predefined size of eccentricity. In the final part we perform a measurement of deviations on the real machine using vibrometer.
|
|
|
Device for diagnostic of induction machine
Buln, Tom ; Janda, Marcel (referee) ; Huzlk, Rostislav (advisor)
The aim of the thesis is to study the problems of induction motors, which belong among the most widespread and used machines. Due to their expansion, it is advisable to start the fault monitoring to prevent any more damage and losses. It can be used for condition monitoring different types of methods, which are variety technically and costly demanding to implement. It is used the method of measurement using stator currents in this thesis, because these currents are already monitored and it is easy to create devices for a more detailed analysis. The whole monitoring is carried out using products from National Instruments. The program of monitoring is created in graphical setting of LabVIEW. The analysis is conducted by calculating the Fast Fourier transform of the time signal. The result is the frequency spectrum, which contains frequency peaks and some of these peaks represent failure. The test data are collected with a DAQ device and then the same data are used for creating a methodology for evaluating online analysis and it is subsequently implemented into CompactRIO.
|
|
|
Celebrity marketing
Voroňáková, Veronika ; Zamazalová, Marcela (advisor) ; Stříteský, Václav (referee)
The target of Master's Thesis is to identify factors of success in celebrity market in the first decade of the 21st century and to formulate recommendations for the Czech Republic for the next 5 to 10 years. The subject of the thesis is to verify applicability of hypothesis: 1. Eccentricity became a factor of success in entertainment industry from 2006 till 2011., 2. Sexual tolerance increased from 2006 till 2011., 3. There is a clear connection between music and fashion industry.; The main methodical instrument was quasi focus group in form of contributions to internet discussion. To qualitative data evaluation was used contentment analysis. Map of perception showed connection between music and fashion industry. The most important factors of success in entertainment industry were: product, performance, eccentricity, originality, humor, style, talent and natural beauty of interpreter. The results confirmed hypothesis number one and number three. The second hypothesis concerning sexual tolerance was not confirmed. The main recommendation for the Czech Republic is to use more eccentricity.
|
guest ::
