|
|
5-Minutes Neighbourhood
Deutschová, Martina ; Urbášková,, Hana (referee) ; Menšíková, Naděžda (advisor)
The subject of the diploma thesis is the architectural study of the mix-used urban housing situated closed to the Brno city centre. The design will allow mixing of greater amount of different functions on a relatively small built-up area, which will reduce the requirements on transport and provide the inhabitant with various forms of housing, services and employment. The mass and spatial solution respects the surrounding city blocks on south and the mass increase to the north industrial zone. The mass defines the area and respect noise protection zone on housing development. The shape of object's ground plan is based on the area, which is divided by four axes of pedestrian paths. The basic matter of object is divided into four blocks linked by common internal square. The mass solution provides private, semi-private and public courtyards.
|
|
|
Distribution warehouses in Prague - construction technology project
Lupač, David ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The subject of this thesis is the construction and technological project for distribution warehouses in Prague. Textual part contains a technical report on construction technology project, wider relations of traffic routes with marked critical points, the study of the main technological stages of the building, principles of organization of construction, design of the main building machines and mechanisms, technological regulations, inspection and test plans, health and safety on the site. In the section with attachments there is a map of the locality, drawings of site facilities, including road signs, charts of the movement of machines, the schedule of the main building structure, the budget of the main building structure, a plan for securing material resources, time and financial plan, an economic evaluation of site facilities, details and other technical documentation stages.
|
|
|
St. Michael's Hospice
Krmaš, Jan ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
The topic of the master thesis is new medico-social facility hospice St. Michaela. The purpose of the object is the maximizing of improvement in the quality of life of dying, severely ill and incurable patients, with the use of palliative care. The construction follows the Complex of Regional Hospital Náchod. Together with as a retirement home Náchod completes a support network of health and social care. The building is designed as a four-building storey and is partially embedded into the sloping terrain. Floors are divided into individual facilities and together constitute a functional unit. In the basement is the technical room, warehouses, garages and kitchen facilities. On the ground floor are then socio-public rooms and facilities. On the second floor is located hedmaster of hospice and accommodation area. The third floor is devoted to the accommodation area. The proposed structure made of brick longitudinal system, supplemented by concrete basement walls. The horizontal structure is made of filigree ceiling panels. Stairs are designed as a precast concrete and steel. Individual roof structures is made from unwalkable, walkable and vegetation compositions. The cladding consists of ventilated facade of glass and wooden panels. Foundations are designed from the lineal foundation.
|
|
|
Administrative building in Prague, solution of the technological stage of cladding
Chovanec, Jan ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
The subject of this bachelor's thesis is the processing of the technological phase of cladding an administrative building in Prague. The lightweight external envelope consists of an aluminum modular facade and an entrance from a load-bearing steel column-grid facade. The thesis includes a technical report focusing on the cladding, the resolution of broader transportation relationships, technological regulations for the modular facade and column-grid facade, construction organization solutions, a quality control and testing plan. Furthermore, a proposal for the machinery assembly, a timeline, a detailed budget including a statement of quantities, occupational safety, and health protection, a construction site equipment design, coordination situations, and a modular facade installation procedure diagram are developed.
|
|
|
Construction-technological project of production and storage hall
Marek, Jiří ; Hejl, Martin (referee) ; Diaz, Yvetta (advisor)
This diploma thesis deals with construction-technological project of production and storage hall in Hradec Králové. The thesis deals with complex of the implementation of the construction and focuses in more detail on the implementation of both foundation structures and assembly of the steel frame. The project includes a technical report on the construction technology project, a study of the implementation of the main technological stages of the main building, design and assessment of construction routes, construction equipment project, financial and construction schedule, machine design, schedule and budget of the main building, control and test plan for foundation structures, and occupational safety and health.
|
|
|
Entrance hall of multi-storey building in university area
Jež, Matěj ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design and verify sufficient resistance of load-bearing construction system and cladding made of structural glass. The object is located in university campus at the suburban area of the city of Ostrava, in district Ostrava Poruba. Floor plan is 8,5 x 12 m. The object is composed of six floors and its total height is 21 m. The object is connected to rest of the building. Main load-bearing system consists of frame made of composite steel and concrete rectangular columns and steel beams. Staircase steel beam and reinforced concrete slab are ensuring spatial rigidity. The object was designed according to currently valid standards using ultimate limit state and serviceability limit state verification.
|
|
|
Procedural parameters at Inconel 625 cladding
Hrádek, Jan ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The research is focused on cladding of inconel 625 using the MAG - CMT method. It was found that welding without an oscillation does not create the necessary geometry to establish additional layers. When welding with an oscillation, it was researched that the current between 150 and 200 A appears most appropriate in the synergistic mode for welding inconel 625. The resulting weld bead was made at a current of 190 A with pulse dynamics correction set to -4 and correction of arc length to +10 and welding speed of 315 mm per minute.The weld bead was not ideal mainly due to insufficient height. The improvement of results could be achieved by set oscilation with fluent change in acceleration. Because of the time options and difficulty of programming it was used only constant speed for all experiments.
|
|
|
Construction Project for Implementation of Industrial Hall for Automotive Industry
Světlík, Jiří ; Liška, Pavel (referee) ; Nečasová, Barbora (advisor)
This diploma thesis deals with construction technology project of a newly-built automotive industrial hall on the complex Hauk – Police nad Metují. The aim of the main construction object is to build a double aisle steel hall for industrial purposes including maisonette built-in which will become social and technical facility for prospective workers. The main construction facility is complemented by secondary structures, creating functional complex for required purposes. The thesis is focused on implementation of the main load-bearing prefabricated steel structure and cladding made of selected system. An integral part of the thesis include main technology phases realization study of the main construction object, a technological prescription filled-in with assembly drawings, a design of machine assembly including dealing with its transportation, a site equipment project, time schedules, a budget, a test and inspection plan and a security measures design for selected risks. The thesis is suplemented by a specialized section dealing with the heating of reinforced landscaping.
|
|
|
Construction Technological Project of a Heat Feeder in South Bohemia
Handlíř, Jan ; Hejl, Martin (referee) ; Mohapl, Martin (advisor)
The subject of the diploma thesis is a technological construction project of heat feeder on the hot water pipeline between České Budějovice and nuclear power plant Temelín. The main object is an industrial hall made of steel and brick administrative part. The hall is a steel structure clad with sandwich panels. The administrative part is single-storey building from bricks and has a flat roof. The construction also includes an access road with car park.
|
|
|
Multipurpose Hospital Building in Český Krumlov - Building Technology Project
Mikulášek, Jiří ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
The diploma thesis is focused on the elaboration of a construction technology project for the construction of a new hospital pavilion in Český Krumlov. The thesis processes the preparation of construction and proposal of the organization of individual activities on the construction site in time sequence. The thesis contains technological regulations for the foundation of construction and realization of the monolithic frame on the 1st floor, which also includes drawings of the formwork of the ceiling slab and a scheme of formwork of columns and walls. Further contents are technological report, technological study of realization, transport relations, time and financial plans, complete construction site equipment for the whole construction phase, design of construction mechanisms and assessment of their suitability for use, resource balance, technological analysis, itemized budget, and occupational health protection for selected processes and noise studies dealing with the impact of building construction on the surrounding development.
|
guest ::
