|
|
Application of Modern Technologies for Production of Front Part Fastening System Mountaineering Crampons
Samohýl, Lukáš ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
The aim this bachelor thesis is a production of prototype front part fastening system mountaineering crampons. In this work will be carried out the design and construction of a new prototype parts using the parametric application SolidWorks. For prototype production front part crampons will be used additive method Fused Deposition Modeling - uPrint 3D printer. Part of the work will be production of silicone moulds front part crampons using vacuum casting system. Silicone mould will be used for casting of a certain number parts from commercially available materials. The work will be finished with technical and economic evaluation of production front part crampons with recommendations and the best economic analysis of alternatives.
|
|
| |
|
|
Usage of modern technologies for manufacturing the blades of fishing baits
Barcuch, Jakub ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
The aim of this thesis was to design a number of blades for fishing baits in 3D parametric CAD system Autodesk Inventor 2010 and their production with using the additive technology of Rapid Prototyping. The method Fused Deposition Modeling will be used to produce the master model blades. The silicon molds for the production of resin casings will be created for blades with compliant properties. The work contains an overview of commercially available Rapid Prototyping methods, their brief description, advantages and disadvantages.
|
|
|
The new modelling facilities at parametric CAD programme
Sedláčková, Petra ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
This bachelor’s thesis describes Autodesk Inventor Professional 2008 and Ansys Workbench. The main aim is familiarization with user interface and working routine in these programs and their cooperation. In part about Autodesk Inventor there is summarized the advantage of parametric modeling against traditional techniques. Also there is described Inventor studio, in which is created an animation of model created in Autodesk Inventor. In the concrete it is animation of model of one phase asynchronous motor with outer rotor. In Ansys Workbench 11.0 there is created transient thermal analysis of one phase asynchronous motor. The aim of this analysis is to try the work in Ansys Workbench from importation of model, from external CAD system, to evaluation of results.
|
|
|
Application of Additive Method of Fused Deposition Modeling to Production of Sprinkler Head
Jandák, Lukáš ; Kouřil, Karel (referee) ; Sedlák, Josef (advisor)
The thesis is focused on the design, modeling and manufacturing of a prototype sprinkler using modern additive technology Rapid Prototyping. The model was created using parametrical software SolidWorks, made ready to print by Cura software and printed in A602 3D printer working on Fused Deposition Modeling method. The theoretical basis of the work is involved in Rapid Prototyping, CAD systems technology, description of additive materials and their applications. Conclusion of this work compares this method with other options of production and evaluates which method is more efficient and more economical.
|
|
|
Manufacturing technology of a car copy by digitizing method
Eis, Jiří ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
This thesis, maked as diploma project at VUT Brno, summarize in teoretical part most used methods, technology of reverse engineering and rapid prototyping, including their using in practice. Experimental part discussed about aplication of this technologies on practical example. Tendency of thesis was creation of digitized model of a car by optical scanner ATOS and photogrammetry system TRITOP, including modifications and processing of get data, which will use to verification of model by FDM technology.
|
|
|
CAD System for 2D Drawing
Murín, Michal ; Chudý, Peter (referee) ; Kršek, Přemysl (advisor)
The Bachelor´s thesis is aimed at the design and creation of CAD system for 2D drawing. It introduces the use of computers in manufacturing and the advantages the use of computers brings, general definition of CAD systems and requirements imposed on them. The thesis contains the design of generated CAD system, and as a practical part it introduces implementation of the designed application. Finally it summarizes what has been achieved in developing and what could potentially be achieved in further expansion of the application in the future.
|
|
| |
|
|
Laser Plotter for Cutting Steel Plates
Dokulil, Marek ; Šimek, Václav (referee) ; Crha, Adam (advisor)
This diploma thesis is divided into two main parts. The first section is dedicated to the history and development of the laser technology. The second part describes all individual types of laser technology which are used in the industry nowadays. The next section follows with the research of various laser devices which serve mainly as a cutting tool. This knowledge gathered in the previous part was used to create the next part including the own conception of the machine. The second half of this diploma thesis deals with a research of software available at the market today. Eventually, after summarizing the characteristics of each software, the new concept and implementation of own software are made. In the final section, there are mentioned the possible extension and available upgrades. The reader should be able to create his/her own conception of the laser device and software after reading and understanding this paper.
|
|
|
Software for Data Processing and Control of CNC Machine
Kraicinger, Lukáš ; Rozman, Jaroslav (referee) ; Šátek, Václav (advisor)
The thesis focuses on the design and impelementation of a control system for a CNC machine producing gears with specific integrated CAM system. The study includes practical verification of system functionality, which includes the design and creation of an electronic circuit on this machine. A prototype of a 6-axis machine is being developed at the Faculty of Mechanical Engineering BUT in Brno as a master thesis simultaneously with the creation of this term project. It is a compact automated gear producing machine (all in one) which requires only appropriate semifinished product and correctly set parameters of teeth using the touch screen on the machine.
|
guest ::
