|
| |
|
|
Altitmeter for RC aircraft models
Švec, Jan ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The aim of my bachelor thesis is to design an altimeter, who uses to record the attitude of the model "RC plane" evaluation of the current atmospheric pressure. The data are saved during the flight into the memory.The data can be transferred to PC after recording through the USB . The software on PC communicates with the device and ensuring the conversion of recorded pressure to altitude RC model.
|
|
|
Altitmeter for RC aircraft models
Švec, Jan ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The aim of my bachelor thesis is to design a altimeter, who uses to record the attitude of the model "RC plane" evaluation of the current atmospheric pressure. The data are storaged during the flight into memory. Data can be after the recording through the USB transferred to the PC store. The software on the PC communicates with the device and ensuring the conversion of recorded pressure to altitude RC model.
|
|
|
Wireless weather station
Filka, Tomáš ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
This diploma thesis deals with a draft of wireless weather station, whose task is to measure basic values inside and outside the home. Measured variables are for example temperature, atmospheric pressure, relative humidity, wind speed and direction or concentration of carbon dioxide (CO2). These data will be transmitted to a web server for later processing. Possible technical solutions are described and the outcome is a designed printed circuit boards, which has been assembled and tested. Resulting system was tested in trial operation.
|
|
|
Microcontroller based system equipped by MEMS barometer
Gábik, Matej ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
The aim of this work is to design micro-electro-mechanical system with microcontroller barometer. The work deals with explaining the problems of pressure measurement, by selecting the appropriate sensor and the actual design and construction of the facility. Data from the sensors are evaluated using a microcontroller in real time on the display.
|
|
|
Altitmeter for RC aircraft models
Kotulek, Milan ; Štohanzl, Milan (referee) ; Prokopec, Jan (advisor)
Bachelor thesis describes a device for measuring and recording flight position RC model, which consist of a microcontroller and a pressure sensor. It measures values of atmosferic pressure and these data are convert by microcontroller to specific height. All is during flight saved to memory and later can be transferred to PC.
|
|
|
Simple FITkit Based Weather-Station
Podivínský, Jakub ; Mičulka, Lukáš (referee) ; Strnadel, Josef (advisor)
In this bachelor thesis, the design and implementation of FITkit-based home weather-station is presented. In the thesis, various methods of measuring meteorological quantities are detailed and discussed together with advanteges and disadvantages of common electronic sensor parameters. Then, weather forecast methods are classified and principle of a simple weather-forecast algorithm based on the atmospheric pressure measurement and analysis is described and discussed according to its realization by the means of the FITkit platform. At the end of the thesis, design and realization of an additional hardware needed to operate the station on basis of FITkit is described.
|
|
|
Info-portal with WWW
Pilný, Jiří ; Franek, Lešek (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with conception of info-portal controlled by Ethernet connection. The system is divided into three parts: web server, control electronics and flip-dot panel. The information to display is sent to or received from the web server. The info-portal is equiped by sensors for measurement of interior parameters (temperature, humidity and atmosferic pressure).
|
|
|
Weather Station
Beneděla, Pavel ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
This thesis deals with conception of proposal and implementation of a weather station. Weather station is composed of three main parts which are measuring station, showing station and USB wireless receiving module. Measuring station measures basic meteorologic variables and sends measured variables through wireless communication. Showing station is designed to present measured data with graphics user interface and generate data for a web server.
|
|
|
Weather measurement
Chovanec, Jan ; Havránek, Zdeněk (referee) ; Bejček, Ludvík (advisor)
The achievement of this thesis is to design functional equipment which is able to measure the basic meteorological variables as air temperature, humidity and barometric pressure. In order to measure relative humidity completed with temperature, an intelligent sensor manufactured by Intersema Inc., MS5534B, was chosen. Relative humidity is measured by a capacitance sensor Humirel HS1101LF. The measured data are stored in anon-volatile memory. Data can be downloaded to a computer file via serial port or they can be online displayed on the computer screen via the wireless Bluetooth connection. Because the equipment is supposed to be used for the external measurement without the connection to electricity, low power consumption was considered as a most important parameter as well as good weather protection.
|
guest ::
