|
|
Design and Realization of Acoustic Adjustments of Listening Room
Vajda, Michal ; Miklánek, Štěpán (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis is devoted to the design of acoustic modifications of residential space and the subsequent implementation of these modifications. Its aim is to design an optimal solution of the space for listening to music in accordance with the Czech Technical Standards. The basic parameters investigated are reverberation time and acoustic quality criteria. The thesis deals with simulation in the EASE modelling program and addresses situations before and after acoustic treatment. The following methods and procedures are used to comprehensively address the above mentioned treatments and to achieve the set objective. Furthermore, the simulation is verified with a custom calculator in Excel. After using the absorbers suitable for adjustment, the implementation with the final measurement of the reverberation time is carried out. Finally, an additional modification design is created using Helmholtz resonators. The implemented methods achieve an optimal and frequency balanced reverberation time and the room can be used as a mixing hall for multi-channel sound recording.
|
|
|
Design and Realization of Acoustic Treatment of Small Recording Studio
Tkadlec, Vojtěch ; Husník, Libor (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis deals with the topic of acoustic properties of an enclosed space, their detection and modification. The thesis examines the acoustic properties of a small enclosed space, which were determined by simulation using a virtual 3D model and subsequently verified by measurement. After finding out the properties, a substantial part was also devoted to their modification, where the task was to design the acoustic elements so that the resulting length of the reverberation time corresponds to the optimal values for a small recording studio. The design of the elements is followed by their construction, followed by a re-measurement of the space. Furthermore, the work summarizes the principles of modeling and simulation of 3D models.
|
|
|
Design and Realization of Acoustic Treatments of Acouctic Space for Musical Production
Skvaril, Šimon ; Říha, Kamil (referee) ; Schimmel, Jiří (advisor)
Subject of this thesis are acoustical properties of space which is used for musical production and reproduction. It covers procedures, which are used for finding out acoustical parameters of chosen space, including virtual modeling and software simulation. Next, there are calculations and design of acoustical elements, which should help to improve quality of music listening. At the end those elements are created and applicated with their functionality verified by measuring acoustical properties
|
|
|
Increasing the energy efficiency of industrial heating plant
Spišák, Lukáš ; Lisý, Martin (referee) ; Kracík, Petr (advisor)
This bachelor thesis consists of two parts. The introductory chapters are devoted to the basic description of cogeneration and trigeneration technologies, focusing on the description of cogeneration units and cooling devices. The second part of the thesis compares two specific ways of using cogeneration units and gas boilers in the CHEMOSVIT ENERGOCHEM a.s. in the town Svit. Subsequently, both variants are evaluated energetically and economically.
|
|
|
Absorption of ammonia from an operational accident in the ice stadium
Ryšková, Marie ; Gal, Pavel (referee) ; Jecha, David (advisor)
This thesis deals with ammonia absorption in case of cooling machine breakdown at ice pool. Thesis is divided into four chapters. Theoretical part is focused on different methods of cooling an ice rink inside a stadium. Two basic principles are mentioned, how ice rink is created and what refrigerant is used. In the next part are listed valid standards, according to which the operators of ice pools proceed or may proceed to ensure technical safety. Essentials of emergency plan and breakdown preventions are also mentioned. Primary theoretical part focuses on gas cleansing by absorption and its basic principle, which includes Fick's first law, following with introduction to different kinds of absorption machines and its principles. Last chapter is a practical one, in which is the elimination of leaked ammonia by ventilation method and more ecological way – ventilation method with absorber. This cleansing method issue is dealt with mathematically by calculating absorbed gas to liquid using software MathCad.
|
|
|
Creating a fluid curtain of the scrubber absorber
Straka, Ondřej ; Kalivoda, Josef (referee) ; Svěrák, Tomáš (advisor)
This bachelor thesis focused on the separation of gaseous pollutants from gas mixture into absorption agent, by using absorption device. The theoretical part deals with describing absorption device in practice and characterization of chemical and physical influence on absorption process. The experimental part concerned describing the construction and properties of laboratory pilot scrubber.
|
|
|
Absorption heat pumps for small applications
Pejcl, Jiří ; Novotný, Jan (referee) ; Mastný, Petr (advisor)
This bachelor work is focused on absorption heat pumps for small applications. The aim of this work is to compile the basic differences between compression heat pumps and absorption heat pums. And also to propose the system with absorption heat pump, which is energeticly classified in the end of the work. In the opening part there is the constructional description of these heat pumps, there are explained basic principles of these mechanisms. Then you will find the comparison of absorption heat pumps and compression heat pumps. Next fraction is concerned with design of the system with absorption heat pump. There is the system with absorption unit designed - this unit enables to heat and to cool. And also with solar system, which will support the heating process of supply water. Final part is applied to energetic evaluation of designed system, for purpose of this evaluation are made basic counts of required energy.
|
|
|
Increasing the flow of cooling water for absorption cooling systems in the nuclear power plant Dukovany
Dvořák, Josef ; Suk, Ladislav (referee) ; Martinec, Jiří (advisor)
The thesis focuses on comparison of the original and the new solutions of cooling water circuit of the York cooling units for the purpose of cooling water flow increase for the absorption units in the Dukovany Nuclear Power Plant. The individual parts of the cooling units that were changed and modified within a reconstruction are described here. The aim of the work is also to process and compare the original and the new solutions of the cooling units and the cold source station from the available measured data. The data are processed into illustrative graphs and tables. Based on the obtained data we can observe the changes achieved by the reconstruction that have affected the effectiveness of the cooling units.
|
|
|
Modular absorption cycle
Honka, Pavel ; Pavlů, Jaroslav (referee) ; Pospíšil, Jiří (advisor)
The thesis is focused on the cooling cycles, namely cycles of absorption. The work is divided into several parts, as problems to be solved. The first part deals with the principles and using refrigeration cycles in practice, their involvement and by comparing the working pairs of substances circulating in the absorption unit. The practical part deals with making a proposal for one-and two-level modular absorption cycle of 6 kW, and the subsequent techno-economic comparison with commonly supplied absorption unit
|
|
|
The large-scale solar systems
Králová, Martina ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
Entering of thesis focuses on large-scale solar systems. Large solar-scale system will be used for heating water in public swimming pool. The pool is located in Brno - country. The pool is operated year-round. Great emphasis of the thesis is on the surface heat loss. Evaporation of water from the water surface is also applied in the experimental part of the thesis. In the calculations is used software for modeling the thermal microclimate of buildings and air conditioning design Teruna.
|
guest ::
