Národní úložiště šedé literatury Nalezeno 26,859 záznamů.  začátekpředchozí21 - 30dalšíkonec  přejít na záznam: Hledání trvalo 0.65 vteřin. 

Time lapse tomography of fracture progress in silicate-based composite subjected to the loading a combination with acoustic emission scanning
Kumpová, Ivana ; Kytýř, Daniel ; Fíla, Tomáš ; Veselý, V. ; Trčka, T. ; Vopálenský, Michal ; Vavřík, Daniel
The initiation and propagation of a fracture in quasi-brittle materials (such as silicatebased composite) is an increasingly discussed topic for which various methods of research have been developed/applied. As the quasi-brittle silicate-based composite compounds are very non-homogenous, the mechanism of the crack initiation and propagation can be very different even for samples with the\nidentical geometry. One possible approach to study the fracture mechanism in quasi-brittle materials is to use several different experimental techniques in a single experiment and perform detail analysis to identify generally valid fracture process phenomena. In this work, a simultaneous monitoring of fracture\nprocess zone formation and propagation by three different methods is presented and discussed. A three point bending test was performed on a notched silicate composite specimen. During the loading process, a highly accurate force displacement dependence was recorded accompanied with X-ray radiography,\nX-ray computed tomogra-phy and acoustic emission scanning.

Book of Abstracts of the 26th Joint Seminar Development of Materials Science in Research and Education
Kožíšek, Zdeněk ; Král, Robert ; Zemenová, Petra
Topics:\n- Trends in development of materials research\n- Education of materials science at the universities\n- Information about the research programmes of individual institutions\n- Information on equipment for preparation and characterisation of materials\n- Results of materials science research

Souhrnná výzkumná zpráva z experimentálních prací zaměřených na iniciování únavových trhlin v pískovci a výzkum vlivu konsolidace na jeho lomové chování v případech výskytu trhlin
Šperl, Martin ; Drdácký, Miloš ; Jandejsek, Ivan
Iniciace únavových trhlin v pískovcových vzorcích (lokalita Božanov) byla provedena pomocí rezonančního pulzátoru v módu tříbodového ohybu. Díky tomu byla poškození geometricky totožná. Následné zkoušky umožnily posoudit vliv konsolidačních roztoků na lomové vlastnosti vyšetřovaného materiálu.

Studium dielektrických vlastností struktur tenkých vrstev organických materiálů
Pospíšil, Jan ; Boušek, Jaroslav (oponent) ; Mikula, Milan (oponent) ; Zmeškal, Oldřich (vedoucí práce)
Dizertační práce je zaměřena na studium elektrických a zejména dielektrických vlastností tenkých vrstev organických materiálů, které mohou nacházet své uplatnění v organické elektronice a dalších odvětvích. Teoretická část se věnuje využití organických materiálů v organických fotovoltaických článcích, způsobům jejich depozice a metodám charakterizace. Jsou zde dále popsány teoretické poznatky o dielektrické spektroskopii včetně metod stanovení fyzikálních vlastností a vyhodnocení experimentálních dat. Experimentální část se věnuje studiu nízkomolekulárních organických solárních článků s objemovým heteropřechodem složeného z elektron donorní molekuly DPP(TBFu)2 a elektron akceptorních derivátů fullerenu PC60BM, PC70BM a TC60BM. Experimentální část je rozdělena na dvě hlavní části. První část se věnuje studiu dějů probíhajících na rozhraní aktivní vrstva/kontakt, druhá část se potom zaměřuje zejména na transportní procesy uvnitř struktury fotovoltaických článků a obsahuje i studium perovskitových solárních článků.

Návrh dolní končetiny testovací figuríny pro nárazové zkoušky
Maršálek, Petr ; Semela, Marek (oponent) ; Bilík, Martin (vedoucí práce)
Tato diplomová práce je věnována tématu návrhu modelu dolní končetiny nárazové figuríny. Práce se zabývá historickým vývojem nárazových figurín až do současnosti, z jakého materiálu jsou vyrobeny a jaká je jejich vize do budoucna. Hlavním tématem práce je návrh modelu dolní končetiny pro nárazové zkoušky se zaměřením na anatomii lidského těla. V práci je popsáno jakým způsobem je možné vyrobit dolní končetinu figuríny za použití formy z materiálu ThermoLyn Clear, lidskou kost je možné nahradit dřevem a svalovou hmotu nahradit agarem.

Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (oponent) ; Navrátil, Vladislav (oponent) ; Grmela, Lubomír (vedoucí práce)
Because of demands from space research, healthcare and nuclear safety industry, gamma and X-ray imaging and detection is rapidly growing topic of research. CdTe and its alloy CdZnTe are materials that are suitable to detect high energy photons in range from 10 keV to 500 keV. Their 1.46 -1.6 eV band gap gives the possibility of high resistivity (10^10-10^11 cm) crystals production that is high enough for room temperature X-ray detection and imaging. CdTe/CdZnTe detectors under various states of their defectiveness. Investigation of detector grade crystals, crystals with lower resistivity and enhanced polarization, detectors with asymmetry of electrical characteristics and thermally degenerated crystals were subject of my work in terms of analysis of their current stability, additional noise, electric field distribution and structural properties. The results of the noise analysis showed that enhanced concentration of defects resulted into change from monotonous spectrum of 1/f noise to spectrum that showed significant effects of generation-recombination mechanisms. Next important feature of deteriorated quality of investigated samples was higher increase of the noise power spectral density than 2 with increasing applied voltage. Structural and chemical analyses showed diffusion of metal material and trace elements deeper to the crystal bulk. Part of this work is also focused on surface modification by argon ion beam and its effect on chemical and morphological properties of the surface.

One-Sided Random Context Grammars
Zemek, Petr ; Černá, Ivana (oponent) ; Doc. In.g Petr Sosík, Dr. (oponent) ; Meduna, Alexandr (vedoucí práce)
This thesis introduces the notion of a one-sided random context grammar as a context-free-based regulated grammar, in which a set of permitting symbols and a set of forbidding symbols are attached to every rule, and its set of rules is divided into the set of left random context rules and the set of right random context rules . A left random context rule can rewrite a nonterminal if each of its permitting symbols occurs to the left of the rewritten symbol in the current sentential form while each of its forbidding symbols does not occur there. A right random context rule is applied analogically except that the symbols are examined to the right of the rewritten symbol. The thesis is divided into three parts. The first part gives a motivation behind introducing one-sided random context grammars and places all the covered material into the scientific context. Then, it gives an overview of formal language theory and some of its lesser-known areas that are needed to fully grasp some of the upcoming topics. The second part forms the heart of the thesis. It formally defines one-sided random context grammars and studies them from many points of view. Generative power, relations to other types of grammars, reduction, normal forms, leftmost derivations, generalized and parsing-related versions all belong between the studied topics. The final part of this thesis closes its discussion by adding remarks regarding its coverage. More specifically, these remarks concern application perspectives, bibliography, and open problem areas.

Determination of thermal response of Carrara and Sneznikovsky marble used as building material
Petráňová, Veronika ; Valach, Jaroslav ; Viani, Alberto ; Pérez-Estébanez, Marta
Physical weathering of marble, widely used as a cladding material on buildings, is one of the most common damaging mechanism caused by anisotropic thermal expansion of calcite grains. The extent of marble deterioration depends mainly on stone fabric and texture. Dry cuboids of Carrara marble and marble from Dolni Morava quarry were subjected to microscopic analysis and thermal cycling, to determine the thermal expansion related to stone fabric and predominant lattice orientation of grains (i.e. texture).

Identification of damaged zones in C/PPS specimens subjected to fatigue loading based on high-resolution thermography
Koudelka_ml., P. ; Kytýř, Daniel ; Fenclová, Nela ; Šperl, Martin
In this study high resolution thermography is used for identification of damaged zones in Carbon fiber/polyphenylene sulfide (C/PPS) long fiber composite specimens with induced impact damage subjected to tensile fatigue loading. Image processing techniques were applied on thermographs from all loading cases to obtain segmented images of the damaged location that were then used for\ncalculation of the heated area. Results show that the considered method can be used to identify heated area in the vicinity of damage with high confidence at low number of cycles where no significant fatigue effect is present in the material.

Literární předloha jako cesta k tématu nesvobody
Machková, Tereza ; PROVAZNÍK, Jaroslav (vedoucí práce) ; ULRYCHOVÁ, Irina (oponent)
Bakalářská práce pojednává o tvorbě a realizaci baklalářského projektu v podobě dvoudenní dílny dramatické výchovy pro žáky druhého stupně základní školy. Tato dílna byla vytvořena na základě dvou knih Petra Síse Tibet: Tajemství červené krabičky a Zeď: jak jsem vyrůstal za železnou oponou, jejím tématem je okupace a nesvobodný život v totalitním režimu. V úvodních kapitolách jsou popsány předlohy a jejich možnosti pro dramatickou výchovu. Následuje zpráva o dvou realizacích bakalářského projektu. V závěrečné kapitlole je pak uvedena struktura dvoudenní dílny, která byla vytvořena na základě popsaných realizací. Do příloh jsou zařazeny materiály, s nimiž se během dílny pracuje. Dále pak struktury, podle nichž probíhaly popisované realizace a úryvky z písemných reflexí účastníků.