National Repository of Grey Literature 40 records found  beginprevious20 - 29nextend  jump to record: Search took 0.00 seconds. 
Software for cameras configuration design of the panoramic system
Jílek, Michal ; Grenar, David (referee) ; Kříž, Petr (advisor)
This work deals with software design in C ++ language and with graphical output using OpenGL for scanning tribune lenses of cameras with different parameters so that the user lens configurations are known beforehand in order to create panoramic coverage of the stadium stadium. The principle of image capture, lens parameters, and formulas for calculating their appropriate layout on the stadium to collect a panoramic image together is discussed. These are: focal length, viewing angles, coverage calculations, image resolution. Furthermore, a draft program implementing the issue.
The analysis of limits for multimode fibre imaging
Štolzová, Hana ; Kozubek, Michal (referee) ; Dostál, Zbyněk (advisor)
Multimódová vlákna jsou zobrazovacím prostředkem s významným potenciálem v in-vivo mikroendoskopii. V poslední době tato metoda zaznamenala velký rozvoj, a to díky zdokonalování výpočetní a jiné techniky, například prostorové modulace světla. Cílem této práce bylo nalézt specifické limity zobrazování multimódovými vlákny a představit jejich počítačovou simulaci. Byl zkoumán vliv způsobu osvětlení optického systému obsahujícího multimódové vlákno na jeho schopnost fokusace a zobrazování. Analýzou dat získaných ze simulací a experimentu bylo zjištěno, že různá míra omezení Gaussovského svazku a plnění apertury multimódového vlákna má za následek významnou změnu zobrazovacích schopností systému. Při pozorování kvality fokusace bylo zjištěno, že nejlépe se projevují svazky málo omezené aperturou vlákna. Tento fakt byl potvrzen i experimentálním měřením. Zobrazování za použití svazků s podobnými hodnotami omezení (50%) projevovalo i nejlepší schopnost přenosu kontrastu. Avšak při analýze rozlišení dvou bodových objektů se jako nejvhodnější projevily svazky významně přeplňující numerickou aperturu vlákna, 100% a více. Přítomnost tohoto rozdílu poukazuje na skutečnost, že multimódové vlákno není zcela náhodné médium, ale propagace světla skrz multimódové vlákno projevuje znaky závislosti na vnějších zobrazovacích podmínkách, jako je například změna omezení osvětlovacího svazku. V této práci bylo představeno několik způsobů vyhodnocení kvality zobrazování pomocí multimódového vlákna. Každé z těchto kritérií podalo dílčí charakteristiku chování optického systému obsahujícího multimódové optické vlákno. Jednotlivé výsledky se neshodují na jednom konkrétním řešení a nutí osobu využívající zobrazovací systém obsahující multimódové vlákno ke zvážení několika aspektů, a to v jakém prostředí bude daný optický systém využívat a který parametr kvality zobrazení bude považovat za nejdůležitější.
Software for cameras configuration design of the panoramic system
Jílek, Michal ; Grenar, David (referee) ; Kříž, Petr (advisor)
The basic laws of physics about light, the principle of image capture, camera parameters and formulas for calculations of their appropriate layout of the stadium so that the read together a panoramic image. Focal length, viewing angle, coverage calculations, image resolution. The transition from theory to practice – draft programme of the issue. The fundamentals of the C++ language OpenGL. Program instructions and samples.
Quality of services and experience qualify for next generation networks
Vaněk, Jiří ; Horváth, Tomáš (referee) ; Grenar, David (advisor)
The thesis sums up the traffic parameters for the evaluation of next-generation access networks. There are mentioned parameters for service quality management and parameters for measuring the quality of experience. The EU regulation on High Speed Internet in the Czech Republic is analyzed. The practical part compares the results between the implementation of the quality management of services and without implementation. Also there is comparing theoretical and practical transmission rates of physical ports. Part of the thesis is a questionnaire focused on the quality of experience of the video sequence.
Cone Be am CT in dentistry: Motion artifacts and their reduction
Hanzelka, Tomáš ; Beneš, Jiří (advisor) ; Charvát, František (referee) ; Mazánek, Jiří (referee)
Cone Beam Computed Tomography (CBCT) allows effective 3D imaging in dentistry. CBCT consists of a planar detector and a x-ray source that rotate once around patient`s head. The x-ray beam is cone-shaped and is directed through the whole volume of interest. All the data needed are obtained during a single rotation of the source and detector. This rotation takes from several to several tens of seconds, and during this time the CBCT captures several hundred of 2D images. They represent different points of view on the region of interest and are later reconstructed to form a 3D data set. The biggest advantage of CBCT is that it can produce 3D image using at radiation doses similar to those of conventional diagnostic methods used in dentistry (Pauwels et al., 2010). In the experimental part of our experiment, we address one of the biggest weaknesses of CBCT - patient movement during scanning which has a major impact on the image quality and is currently the main limiting factor in the further development of this technology. In the first part of our experiment, we recorded movements of patients and CBCT scanner using a high speed camera and subsequently analyzed the data in MatLab program. Significant level of patient motion as well as motion of CBCT scanner was demonstrated. Motion was highest at the...
Calibration of angular encoder
Šindelář, Michal ; Klusáček, Stanislav (referee) ; Beneš, Petr (advisor)
This master’s thesis deals with calibration of incremental encoders. Introduces basic principles and terms in the field of rotary encoders and its calibration. The first part describes angular displacement sensors. Especially it focuses on optoelectrical incremental encoders. It also includes market research of very high-accuracy encoders. The second part contains description of precision calibration techniques with uncertainty to the thousandth of an arc-sec level. In the last part, the development of a calibration stage is presented and consequently the error map of an encoder is obtained.
Modern Imaging Techniques in Medicine
Pařízek, Aleš ; Neuwirthová, Ludmila (referee) ; Rujbrová, Šárka (advisor)
Cílem této práce je popsat základní principy a fyzikální veličiny spjaté s jednotlivými zobrazovacími metodami a poté jednotlivé metody porovnat. Práce popisuje vznik rentgenového záření, jeho interakci s různými materiály a metody snímaní pro vytvoření obrazů. Dále se práce zabývá základním principem vytvoření 3D obrazů pomocí počítačové tomografie a jednotlivými generacemi tomografických strojů. V poslední části se práce věnuje principu nukleární magnetické resonance a základním parametrům pro vytvoření obrazů pomocí MRI systémů.
Nonlinearity in the course of acqusition date in optical coherence tomography
Kadla, Jan ; Kolář, Radim (referee) ; Kuna, Zdeněk (advisor)
This bachelor thesis builds on my semestral work, thus provides a description of the problem of optical coherence tomography imaging system in terms of a brief historical development, structural parts and modifications. Previous work is supplemented by a more detailed description of data acquisition and especially signal processing. I present examples of the clinical and research application of this technology, and try to objectively refer to its advantages and disadvantages. Chapter dedicated to the description of a practical measurement explains selected data collection procedure and clarifies their following processing. At the end of the work are summarized the results achieved, including the considerations of potential errors during the measurement.
Methods of Increasing the Dynamic Dange of Image
Sailer, Zbyněk ; Juránek, Roman (referee) ; Koutný, Jiří (advisor)
This thesis deals with dynamic range of digital cameras sensors problem and methods for solving this problem. There are described the existing methods of high dynamic range image creation, the techniques of obtaining the input data and a new method of creation of HDR image - so-called direct generation.
Super-resolution methods
Franěk, Pavel ; Fedra, Petr (referee) ; Mézl, Martin (advisor)
The main goal of this bachelor’s thesis is acquaint with method, which enable increasing resolution digital photos. Also realize individual interpolation method and Super-resolution by the help of programme Matlab and reference on estimation record. Discuss possibility using method super- resolution for imagery with medical modality.

National Repository of Grey Literature : 40 records found   beginprevious20 - 29nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.