|
|
Energy performance of a civic building
Kořenková, Veronika ; Horká, Lucie (referee) ; Horák, Petr (advisor)
The goal of this thesis is to process three variants of energy performance certificate of the building with different heat sources. The building is in mountain area Bílá in Frýdek-Místek region. The thesis has three parts. First part is focused on literary research of heat pumps. Second, calculation part, describes three proposed heat source solution. First heat source is heat pump, second is pellet boiler and the last one is gas condensing boiler. All three variants are evaluated from the economic and ecological perspective. Last part of the thesis contains three energy performance certificates of the examined building.
|
|
|
Advanced methods of application of thermal techniques in the design of heating buildings
Mikoláš, Petr ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The diploma thesis is divided into three parts. The first part is theoretical devoted to the introduction of BETONG building material. And next It is also devoted to themes of low - energy buildings and nearly zero-energy buildings, heat sharing and thermal comfort. In the second part is the concept of the heating system elaborated in three variants of the design in the scope of the study for the new family house. The third part is devoted to use of shell blocks of the BETONG with internal contact insulation compared to other masonry systems.
|
|
|
Heating with renewable energy sources
Oravec, Jakub ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The goal of this thesis is to design heating sytem and hot water preparation system in apartment building with use of renewable energy sources. Theoretical part is focused on solar thermal collectors and their technical attributes. Practical part contains design of heating system and design of domestic hot water preparation system. Transport of heating water is provided by two pipe heating system with forced water circulation. Pellet boiler is usead as a heat source and is also usead as a primary heat source for hot water preparation. At the same time secondary domestic hot water prepartion system was designed through the use of solar collectors.
|
|
|
Heating of Leisure Center
Vích, Pavel ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor´s thesis is design of heating and warm water preparation of leisure center. Project is solved in two variants. First variant expect only natural ventilation. Second variant provide for a forced ventilation for whole object. Source of heat is pellet boiler, charged storage tank. Warm water is preparing in combined DHW cylinder. As heat transfer surfaces are design heating bodies.
|
|
|
Design of heating of the building
Dittrichová, Zuzana ; Horák, Petr (referee) ; Maurerová, Lenka (advisor)
The aim of this diploma thesis is to find a solution of heating system, a hot water preparation and a subsequent design of the heat source for the apartment building. The project consists of a calculation of heat losses, a design of radiators, a dimensioning of pipes and a design of two options of the heat source for heating and hot water preparation. The first option of the heat source I chose a pellet boiler and the second option is an electric boiler with solar collectors for the preparation of hot water. The introductory part deals with analysis of this object and emission limits of heat source using different fuels.
|
|
|
Household heating systems
Ševčík, Ondřej ; Bok, Jaromír (referee) ; Bartošík, Tomáš (advisor)
Main goals of this bachelor thesis are economic evaluation of four chosen technologies of heating, and heating system design. Introduction deals with problem of heating in a family house, types of heating systems and main influences affecting the choice of heating system. The third chapter discusses main components of heating systems. Each component of the system is characterized and described. The most important parts include heating source, which are divided by type of fuel. The fourth chapter describes other possibilities of austerity meassures, which reduce heat loss and heating costs. There is a mention about government subsidies. The fifth chapter shows the shares of different heating sources, that are used in residential houses. In the last chapter, the computation of heat loss in the particular object is done. Based on the heat loss computation floor and radiator heating system is proposed. Four heat sources are chosen for the object (gas boiler, heat pump, biomass boiler and electric boiler with acumulation tank) and the purchase and the operating costs are computed. Conclusion of the chapter is devoted to the economic balance of the four heat sources and their comparison in the return of investment.
|
|
|
Heat pump in multivalent heating system
Šedý, Martin ; Burian, Pavel (referee) ; Fiedler, Jan (advisor)
Thesis deals with the usage of energy from recoverable resources. Theoretical part of thesis includes the description of the utilisation of heating pumps, solar radiation and biomass. The real status of the implementation is described in the second part of the thesis. Last part of the thesis contains the energy and economy valuation of real implementation.
|
|
|
Heating of the functionalist Villa
Křikava, Michal ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This master´s thesis focuses on a design of a heating system in the functionalist villa Stiassni. The building is located in Brno and was used as a government villa. The objec-tive of this work is to select the appropriate type of heating system out of three differ-ent heat sources – an automatic pellet boiler, a gas boiler and an oil boiler. The theo-retical part is focused on the history of the villa Stiassnia, functionalism itself and other functionalist monuments. In the project part, the design of a heating system using the chosen type of heat source, which is a pellet boiler, is described.
|
|
|
Proposal of heating from the perspective of the primary energy
Jurka, Vít ; Adam, Pavel (referee) ; Horák, Petr (advisor)
This master´s thesis proposal addresses the heating from the perspective of primary energy in the object. The building is located in Brno and is used as a villa with a pool hall. The object of this work is the selection of appropriate variants of three heat sources (gas boiler, pellet and electric) in terms of primary energy. The project is design of the heating system chosen mode of heat, which is a pellet boiler. The theoretical part is focused on the pellets and their history, classification, properties, production, storage and transport.
|
|
|
Biomass boiler room
Egerle, Dušan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The aim of this project is heating and warm water preparation for apartment block in Choceň (Pardubice region). Apartment block has three aboveground heated floors and one underground unheated floor. The heat source is gasifying firewood boiler or pellet boiler which is at the same time used for water heating but only in the winter time. The other parts of the year the solar collectors are installed and used for water heating. The heat source is located in detached room with its own access, in boiler room.
|
guest ::
